How to fit 5110 into car cradle in '01 Mercedes Be...

I've just bought a secondhand '01 MB E320 which the owners manual tells me is set-up to take a Nokia 5110 so that hands free calls can be made via the in built Sat Nav system. I purchased a Nokia 5110 on eBay, it perfectly
matches the pictures in the MB owners manual, the ID in the back of the phone (under the battery) verifies that it is indeed a model 5110.
Problem: The phone won't fit the cradle:
The connector pins match, the shape of the cradle recess is the same as the phone, but the stubby ariel prevents the top end of the phone from sitting down into the cradle recess. I've confirmed the car hasn't been modified, it's the original phone cradle that was put into the car at build !
Any suggestions on a remedy?

Hi naida
I wonder whether as factory fitted cradle utilizes inbuilt antemma on the car instead of the phone's stub aerial.
At the back of the 5110 below the antenna there is a connector for an external antenna. The connector may be protected by a rubber cap. If it is, first remove the cap before inserting phone in car cradle.
Please see page 31 of the user manual.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

How to fit SSD into my laptop?

I have an SSD. I want to get it into my laptop. I have a Pavillion DV6 3216-us, and I also have an SSD, can't find it on google, but it has a internal half-mini PCI-e connection. I don't really know how I am supposed to get this into my laptop, as I can't seem to find a adapter to make it SATA to replace my current hard drive. If you guys could help me out, I would appreciate it. Also, I'm not too good with these things, like the adapters and compatibility between things. Thanks.

hayd3nd wrote:
I have an SSD. I want to get it into my laptop. I have a Pavillion DV6 3216-us, and I also have an SSD, can't find it on google, but it has a internal half-mini PCI-e connection. I don't really know how I am supposed to get this into my laptop, as I can't seem to find a adapter to make it SATA to replace my current hard drive. If you guys could help me out, I would appreciate it. Also, I'm not too good with these things, like the adapters and compatibility between things. Thanks.
This kind of solid state drive is not compatible with the laptop. Even if you can fit it into an adapter (haven't found any), the BIOS may not to detect it. Sell the ssd and buy a typical SATA II one..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

How to fit HTML into a web content overlay?

How can I fit a 640px x 960px HTML generated from Adobe Animate into a Web content overlay with 640x x 960x dimension graphic frame?
When I uncheck the "scale content to frame" option, the HTML was scaled up--cropping 3/4ths of the image. But with the scale content frame option selected, the HTML was scaled down showing the whole image but on a 1/3rd scale.
The article format is set to PDF.

I assume you mean Edge Animate.
What version of ID? Did you fully patch Edge to 1.0.1?
If you have CS6 you can just place the OAM file.
Bob

How to Fit large size image into ScrollingImagepanel

I am newbie to JAI.
If the size of the image is large then how to fit it into scrolligImagePanel size?
What is the method to be used to fit it?
Your help is highly appreciated.
thanks in advance

Tom,
What version of PrPro are you working with?
Actually, MPEG-2 is not a good format/CODEC to use, as it is both heavily compressed, and is in GOP (Group of Pictures) structure. The version of PrPro, that you have, might well define the best format to use, and maybe even not need to convert.
Unfortunately, the Live version of WMM will only Export to WMV, where the "non-Live," older version, can Export to DV-AVI, though only Type I, and not Type II.
In general, for an SD Project, DV-AVI Type II is as good, as it gets.
The Frame Size of your Project is a bit odd. What prompted you to chose that?
Good luck, and let us know just a bit more.
Hunt

Can someone explain how Groupware fits into the CRM mobile model?.

Can anyone explain how Groupware fits into the CRM mobile model?.
Also we have the client console on the laptop, but it looks very basic. My understanding is that it's supposed to be able to download sales details before going on the road, is that correct, or have I misunderstood something?.
Jason

Hi Jason,
For Groupware integration try looking at
http://help.sap.com/saphelp_crm50/helpdata/en/74/49af3ab73dc363e10000000a114084/frameset.htm
For Client Console functionality refer to
http://help.sap.com/saphelp_crm50/helpdata/en/9d/a7443bc6054d4ee10000000a11402f/frameset.htm
Regards,
Gervase

How to fit video size into project (change dimensions)

Hello,
I'm trying to make a short film (~5 minutes length), which includes photos and videos. I understand that MPEG-2 is the best format to work with, so I converted my videos (4 of them) into MPEG-2. The project size in PrPro CS4 is 960x720, 25fps, 48000 hertz stereo. The videos were taken from iphone (mp4) and Windows Live Movie Maker (wmv), and converted into MPEG-2 with Xilisoft Video Converter. They are in different dimensions (for example, the wmv is 1080p, so it doesn't fit my project), and the mp4 is rotated 90 degrees, so it needs to be flipped and I guess resize to a height of 720p.
Unfortunately my computer is 2.2ghz core2duo with 2GB RAM running on Windows 7 32-bit. I must create this video on this computer. If I will use the native files, how can I fit them into my project size (960x720)? how can I set different dimensions to the videos?
Thank you in advance for your support
Tom

Tom,
What version of PrPro are you working with?
Actually, MPEG-2 is not a good format/CODEC to use, as it is both heavily compressed, and is in GOP (Group of Pictures) structure. The version of PrPro, that you have, might well define the best format to use, and maybe even not need to convert.
Unfortunately, the Live version of WMM will only Export to WMV, where the "non-Live," older version, can Export to DV-AVI, though only Type I, and not Type II.
In general, for an SD Project, DV-AVI Type II is as good, as it gets.
The Frame Size of your Project is a bit odd. What prompted you to chose that?
Good luck, and let us know just a bit more.
Hunt

Please can someone help, I have a question in my coursework that I don't know the answer to! Explain how PostScript fits into the design process?

Please can someone help, I have a question in my coursework that I don't know the answer to! Explain how PostScript fits into the design process?

The simple answer is that today PostScript really doesn't fit at all into the Graphic Design process, at least in terms of what the graphic designer needs to know.
Historically, though, the PostScript imaging model, first introduced circa 1984 provided the basis for the initial publishing software including PageMaker, Illustrator, QuarkXPress, and even Ventura Publisher. This imaging model included support for continuously scalable text, vector, and raster imagery as well as the concepts of a current transformation matrix that allowed arbitrary scaling, rotation, etc. and multiple color spaces (grayscale, RGB, CMYK, spot, device independent, and color-managed).
The PostScript imaging model was effectively replaced by the PDF imaging model, a significant superset of the PostScript imaging model, by the time Illustrator 9 and InDesign 2 were released in terms of support of ICC color management, transparency, etc.
The fact is that a good graphic designed doesn't need to know anything about PostScript or PDF per sé, but rather about the basics of color (such as issues associated with color gamut and what how that affects display and printing), use of text versus vector versus raster images and why one should keep content at the highest level of abstraction all the way to the rendering (or screen) or RIP process for printing. Some knowledge of typography also helps.
- Dov

Iphone 5 car cradle charger?

Does anyone know of a iPhone 5 cradle that fits into a car vent and also charges when placed into the cradle?
Something kind of like this http://www.amazon.co.uk/Brodit-514433-Attachment-Lightning-Adapter/dp/B00A98V3L8 but for a car vent?

dont think it charges but
http://store.apple.com/us/product/HC299ZM/A/kenu-airframe-portable-car-vent-moun t-for-iphone?fnode=46&fs=f%3Diphone5-iphone5s-carmount%26fh%3D35e4%252B3ea8%252B 2af5%252B30eb
Peace, Clyde

How can i get my car to change the track when i am listening to the music on my phone through the line-in?

how can i get my car to change the track when i am listening to the music on my phone through the line-in? is there a app i can download so it will recognize it? i have a vauxhal astra and the controls are on the steering wheel

First question is how old is Astra and you are in UK ( well you must be to have a Vauxhall)
Normally the Radio only has a line in socket to allow sound
You have two choices here either a simple cable with a 3.5mm Headphone plus at each end
or a cable with the headphone plug to place in car's line in plug and a wide Apple socket to fit the base of your iPhone This allegedly gives better sound but you have to control the iPhone for music selection
The equipment you need to control the iPhone from the Steering Wheel controls ,which I suspect currently handles radio /Cd tracks /stations ,is much more complicated it will have to be integrate with the Factory Fitted radio
and designed to manage the S/Wheel controls and translate to the iPhone .
Fitted into back of radio etc etc
If car is a recent Vauxhall there may be a kit available from them .but will not be cheap
Many imponderables you did not give much away in your OP

Nokia 6288 car cradle for Mercedes

Hi,
I have just purchased a Mercedes SLK with prewiring for a fully integrated hands free mobile phone but Mercedes are not able to supply a cradle for my Nokia 6288.
Does anybody have a solution for this - can I get a cradle from Nokia and have it installed by a third party specialist car phone installer ?
Does anybody have any experience with having a phone fitted to a Mercedes by a third party installation company ?
Would be grateful for any suggestions.
Thanks
Robin194

Hi Scoobyman,
Thanks very much for your reply.
Not sure what the UHI system is; Mercedes describe the option as prewiring with hands free facility for the phone, controllable via the multi function steering wheel. The cradles currently offered include the MB 6787 5822 that you mentioned (for Nokia 6210; 6310; 6310i); there is also a bluetooth integration cradle MB 6787 6125 (with no indication as to what phones this supports), and a Bluetooth cradle MB 6787 6128 which appears to be compatible with various listed Nokia and Siemens handsets (but not the Nokia 6288); and a further Bluetooth cradle(H.F.P) MB 6787 5877 which is compatible with some other listed Nokia and Sony Ericsson phones (but not the Nokia 6288). No idea what H.F.P means.
I have also not heard of the Visee0 MBU 1000 Bluetooth module you mention; who supplies this ? How can I check this out for compatiblity between car and my Nokia 6288 ?
Basically I am looking to connect my phone to the Mercedes supplied hands free integrated wiring system ideally by getting a suitable cradle for my Nokia which someone (i.e. a specialist carphone installation company)can fit to the car and get it all working for me !!
Mercedes seem not to have kept up with the latest phone models regarding their cradle offering; I need someone to finish the job for me.
Any further suggestions (from anybody) would be much appreciated.
Thanks
Robin194
Message Edited by robin194 on 24-Mar-2008 04:28 PM

-How to restrict Description into single row in the report

Hello Colleagues
I have a report which shows Material number versus Revenue. In the row, material is displayed with Technical name and description.
Here, the view of the report shows the description in single line. While, in the report, description of the report runs 3 to 4 lines though description contains 5 to 6 words (which can fit easily into single line).
Let me know how to restrict each row descrption into single line.
Regards,
Ningaraju

Hello Colleagues
Please find the format it is currently appearing in the web reports.
Material Num        Material Description    Revenues (In Eur)
1000001               "SAP
                            ERP
                            Professsional
                             User"                             111
Wanted to change above format into as below in which it has to show material description in single row.
Material Num          Material Description                              Revenues (In Eur)
1000001                 "SAP ERP Professsional User"                         111
Regards,
Ningaraju

HT2731 how do i log into my itunes account

how do i log into my itunes account

How is asking for enough information so that anyone can answer the question "not helping"? Do you expect us to be psychic and just be able to intuit as to what Veronica meant? And Veronica posted almost a year ago and apparently didn't care enough to post back with details, so it's your reply that serves no useful purpose. Frowny face yourself.

How to fit part of video in custom selection

Ok let me brightly explain what I want to do. So lets say I have a 720p or 480p video and i want to cut out a few seconds of it and fit in selected area 320x480 without deforming sizes.
Here's a picture of what im imgainating: (you tell me if this is possible)
Red selection is my 320x480 and background is our video. The point is to capture the walking couple into that selection while keeping its orginal size (no reforming - longer legs etc.)
What im trying to say that our target is always bigger or sometimes smaller and its ?impossible? to fit it in whatever size we want without deforming.
Im trying to make a perfect loop animations that can be used as live wallpapers on android but its not looking good when faces are squished etc. Exporting normal size video and croping every single layer is uneffective pain in ***.
Please help me im total begginer in AAE or Premiere.

I Honestly have no idea what you are talking about. how would anyone be able to force fit something into a predefined are without defirmations if the aspect ratio doesn't match that of the original image section? You are looking for something that is simply in a technical sense impossible. Beyond that - seriously simply learn to use the tools before complaining about them.
Mylenium

How to fit video to DVD-5?

Hi: I have been reading the faqs and forums, and pulling info from a variety of sources, but I am still confussed about how to fit my video to a DVd-5 using Encore. I have previsouly made DVds using Encore 1 & 2.0, so I know the process. But those were smaller projects under 1 hour running time. My current project is approaching 100 minutes for the main feature with small extras, and some basic menus.
I have read that I should be able to fit 110-130 minutes max on a DVD-5. I have also read to realistically expect something closer to 60-75 minutes. Which is it?
My footage is sport oriented so their is movement and & action, lots of transitions, & some composting.
Can someone tell me how do I fit 100 minutes to DVD-5, if that is possible?
I am editing my feature in PPro 1.5. I export 5-10 minute segments as DV AVI files, and then color adjust etc in AE 7.0., which I have been saving as Microsoft DV. I was planning on final assembly of all segments in AE 7.0, & export the whole feature from AE 7.0 as Microsfot DV. But I think this makes my feature file too big and it won;t fit to DVD-5. Is there another codec I should be using for final output to Encore?
What if I assembled in PPro 1.5 and exported to AE for final color. Is there a different codec I should be using to help it fit later on?
Also, I usually leave Encore set to automatic transcode and let it figure whats best. Should I be picking soemthing different?
Thanks and sorry if this has been cover before

Wondershare Video to DVD Burner is fast video-editing and DVD-authoring software. In just five steps, easily convert and burn all popular video files directly into DVD movies so that you can watch them on TV. It offers a wealth of tools for more hands-on editing, including video trimming, producing your own soundtracks, menu templates and in addition to apply fancy transition effects between clips, which help users produce professional-looking movies and play them on almost any DVD player.
Just download it at http://www.oursdownload.com/video-to-dvd.html

My lightening charger is not fitting snug into the charging port

Hello. I am having trouble with the lightening charger for my iPhone 5. When I plug it in, the phone makes the sound that it always does, indicating that it is charging. Then, it starts making the noise over and over. The lightening charger is not fitting snug into the charging port. I tried cleaning it out and got a big ball of lint out, but the issue remains. It is hard to get a charge, I have to place my phone down and finagle the lightening cord so that it will charge. I have a Genius Bar appointment, but it isn't until the end of the week. Does anyone have any suggestions? I'm also having this issue with my car charger, so I know its not the lightening cord that came with the phone that is causing the problems.

Make a Genius Bar appointment before you make the drive.

How to fit 5110 into car cradle in '01 Mercedes Be...

Similar Messages

Maybe you are looking for