How to FIX a HD with 10.4.6 and OS on HD with 10.4.8 ?  RED EXCLAMATION !!

So I got a new HD! And updated to 10.4.8.
Now I went to install a virtual drummer program with the program on the OS drive and want the SOUND BANK (6+ gigs) on an old HD! The old HD has 10.4.6 so I can't do it.
Is there a utility that can fix this? Tried the OS UTILITY to no avail.
Thanks!

If you need to use Disk Utilities Repair Disk function you will need to boot from your Tiger installer disk to do so.

Similar Messages

  • How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

    does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

    Hello Mokhtary123 and welcome to Apple Support Communities,
    It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
    But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
    A flashing question mark or globe appears when you start your Mac - Apple Support
    OS X Recovery
    http://support.apple.com/en-us/HT4718

  • HT1366 How to fix Flashing Folder with Question Mark on Mac

    How to fix Flashing Folder with Question Mark on Mac

    RichardEL is probably correct.  I’ll go through your questions.
    > there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
    I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not.  The System Disk partition would be below the HD icon indented to the right.  It is usually called “Macintosh HD” unless you renamed it.
    > when I go into disk utility my HD appears on the left, but I can repair or verify it
    Odd.  It appears but you cannot manipulate it with Disk Utility.
    > The S.M.A.R.T status reads verified
    If it did not say Verified then it would indicate a problem.  Saying Verified does not rule out problems but I think it indicates it is still breathing.
    > Is the HD deceased?
    If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing.  If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
    >  [If I] restore from time machine [will] everything will be back as it was before?
    Yes.  That is the beauty of Time Machine.  All your data, applications, and system preferences will be as they were as of the last backup.
    > I was thinking of erasing the HD, would this be of any help or do I just need a new one?
    Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk.  Before proceeding it may be useful to have an expert at an Apple store look at it for you.  They may be able to revive it without a clean install or new disk.
    As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help.  To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk.  Here are links to the screwdrivers and enclosure you would need.
    $5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    $22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
    If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition.  Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros.  This will write to every sector to map out bad blocks.  (If you have an SSD do not write a pass of zeros.)
    If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly.  Google “Seagate 1 TB hybrid SSHD”.

  • WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

    WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

    Hello, might it be Video card related?
    See if yours is on the recall list...
    iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
    http://xlr8yourmac.com/
    http://support.apple.com/kb/TS5167?

  • My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn'

    My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My ipod touch screen is white and i dont know how to fix it i already tried home button and lock and also restarting it but it still is white in the backgroud i can still hear the typing eventhough its all white

    My ipod touch screen is white and i dont know how to fix it i already tried home button and lock and also restarting it but it still is white, in the backgroud i can still hear the typing eventhough its all white

    Try restoring the iPod. First from backup and if problem persists, restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How to fix a problem with the discharge rate of the battery in the iPhone

    Hi I have a question namely how to fix the problem of discharging the battery in the iPhone 4 with ios7.1

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • How to fix ASA problem with Error message id 713231, 713232 ?

    Dear all,
    It's been two day with this problem and it's not possible to stablish vpn with peer yet. ASA is reporting error with messages id: 713231 & 713232. Before this the vpn was working perfectly. I did a reload of the ASA, but the problem continues:
    713232    Group = x.x.158.254, IP = x.x.158.254, SA lock refCnt = 0, bitmask = 00000000, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 1, qm_secret_key_cb = 0, qm_encrypt_cb = 0
    713231    Group = x.x.158.254, IP = x.x.158.254, Internal Error, ike_lock trying to unlock bit that is not locked for type SA_LOCK_P1_SA_CREATE
    ASA 5510 version 8.3 (1)
    Is there anybody who knows how to fix this?
    Thanks in advance.

    Firstly ASA version 8.3 isn't that stable. I would advice you to upgrade to 8.4(5).
    Did you do a search in google? This is wat I found:
    http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4776301
    Posted by WebUser Erik Boss from Cisco Support Community App

  • How to fix underscan problem with footage

    I am trying to help a friend fix a problem with some footage he shot. A client was standing in front of a painted matte. The footage was shot,(and cannot be re-shot) and once back in the studio he found that a the edge of the matte that is not painted is showing up beyond the TV safe area. It can be seen on a computer screen and if shown thru a projector. The viewfinder of his camcorder did not show this problem.
    So how can we fix it? It is a narrow band of white on the left side of the screen. The problem is that part of some leaves cross over it and out of frame. We have tried just simply scaling it up to get beyond the white edge but the picture quality begins to degrade. We have to fix this using FCP since that is all that is available to us. The clip is fairly long so we probably won't have the time to fix it in Photoshop.
    Any help is greatly appreciated.
    He is using FCP4.5 on a dual processor G5.
    Thanks!
    Ymir

    The cropping would leave a black bar. Something I was thinking about doing has cropping involved. I thought about duplicating the clip and stacking it over the original clip. Then crop it as suggested and then scaling the clip underneath and apply a Gausian blur. This would eliminate the white edge. Problem is, I have a hard line where the cropping took place. If there was some way to just feather the left edge of the crop.
    My friend thinks some type of masking needs to take place where we could just re-color the white bar but as of yet we haven't discovered how to go about it.
    Thanks for the suggestion,
    Ymir

  • How to fix computer freeze with external USB drive attached

    Hi, My computer has frozen a few times lately when my external drive was hooked in, mostly to upload music to Itunes on my MacBook Air.  Anyone know what's happening and how to fix it?
    Thanks
    Peggy ;~)

    the image isnt just 1 big file
    its got a bunch of files
    som .ini configuration files here and there
    the trick is to find which files controls the directory to start loading from
    and change the waiting for f:
    to waiting for anything else
    external ODD, flash drive, or anything other than the internal ODD cuz its broken
    the files on the disc are
    recovery disc+
    .....boot+
    ..............fonts
    ..............bcd
    ..............boot.sdi
    ...................eftsboot.exe
    ......efi+
    .................microsoft+
    ...................................boot+
    ..............................................font s
    .................................................. ......bcd
    .....HDDPREP+
    ............................boot
    ............................sources
    ............................bootmgr
    ......HTMPREP+
    ...........................readme.html
    ...........................toshiba.jpg
    ......sources+
    .......................boot.wmi
    .......tools+
    ..................crtdll.dll
    ...................imagex.exe
    ...................version.txt
    ...................vRecoFastCRC.exe
    ...................XcludeCRC.ini
    ...................zlibwapi.dll
    ....06466XR1.CRC
    ....06466XSP.SWM
    ....06466XSP2.SWM
    ....06466XSP3.SWM
    ....06466XSP4.SWM
    ....06466XSP5.SWM
    ....06466XV1.CRC
    ....bootmgr
    ....Setenv.ini
    im know im not super computer expert but as far as my knowledge goes its probably 1 of thos xxx.ini files cuz usually contain settings and stuff like that
    they are easy to open with notepad and easy to just change one of them and burn a new disc with the corrected file
    i just need someone to help me figure out which one to change and what to change it to the rest is easy

  • How to fix pam config with solaris-backup-1

    Hi,
    I do an error on pam.d and i don't connect to my solaris.
    I succeed in solaris-backup-1 but it's an archive.
    So how to fix my pam.d config with solaris-backup-1
    Thanks for your help

    I do "beadm activate solaris-backup-1"
    and i obtain with "beadm list" :
    solaris-backup-1 NR / 5.43G static 2014-09-22 11:21
    solaris-backup-1 is a back-up of the installation
    I didn't find my files in /opt
    So i activated/mounted solaris
    beadm activate solaris
    beadm mount solaris /mnt/solaris
    I succeed in modify pam.d
    Thanks

  • How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

    How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

    Which model computer?
    What operating system?

  • How to fix yahoo mail going to trash folder and not inbox?

    Incoming email to my yahoo account (through Rogers) ends up in my trash folder and not my inbox.
    I do not have the same problem with my gmail account and email addressed there goes to the gmail inbox.
    Any advice on how to fix this problem?
    Thanks

    I've deleted all future appointments from the Hotmail calendar.
    I've left the iPad overnight "thinking" about removing Calendar from iCloud and gave up this morning.
    My son has school information on the iPad.
    Please help???
    Regards,
    Anthony

  • How to fix a issue with a corrupted LDAP?

    Hi all.
    I am new to this communty
    ll appreciate if some of the knowledgeable members can help me on few weblogic scenario based querries.
    so here's it:
    If your weblogic server fails to start after you enter your credentials; and you know it’s an issue with a corrupted ldap; how would you fix it?

    firstly, check if you are entering the correct data..
    1) If you are entering right and getting rejected, rename the LDAP directory and restart the servers.
    (It will create a new LDAP directory with encrpted values in their files)
    2) If you forgot your password, rename LDAP directory and replace the encripted password with the new password in boot.properties and restart the server(s)
    Please let me know if that does not work.
    PS.. DONOT delete the LDAP directory, rename it(just in case)...

  • How to fix Home Sharing with new iOS 7 upgrade

    My Home Sharing wont work now I have updated my iPhone and iPad to the latest iOS.  How do you fix this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections 
    Recommended Wi-Fi settings
    Sources of Interference
    Wifi Diagnostic Software (for Mac users)

  • Can anyone tell me how to fix the problem with downloading music? Now with the new iOS5

    Ever since the new iOS5, and now 5.1, whenever I download music, and play it on my iPad2, the album cover will "flash" white between each song, whereas before the picture would hold steady for the duration of the album play! I have to admit I find this REALLY annoying! Even syncing with my MacBook doesn't fix the problem...any ideas?

    Hi Jane,
    First, regarding the virus issue, although I cannot promote any specific 3rd party software, there are plenty of FREE and very good anti-virus apps out there. You can Google 'free antivirus" and a good list will come up. You may want to look at a few reviews before you try. I don't know if you use Mac or Windows so you may have to do a little research on which is best for your computer platform. You can run the software and it will help clean off your system if there's a virus.
    Second, regarding your Elements sync to Revel, you may need to disable and then re-enable the Revel sync agent from within Elements, which you find in Preferences. In addition you may try signing out and then back into Revel via Elements.
    Let me know how that goes. If the disable/re-enable doesn't help, I'll get an Elements team member to see if they can help.
    Best of luck on the virus software!
    Glenyse

Maybe you are looking for