How to fix gray background on images without checking "retain color depth"

I have a cover page on my report where the user can insert a logo image. The problem is that if the logo image has a white background it will turn the white background gray. I have figured out how to resolve this by checking "retain original image color depth.u201D The problem with this is that all the images in my report are larger so the report pdf file size goes from 3mb to 30mb. Is there a way to make the logo image appear as normal without having to check the retain color depth? I have tried adjusting the image in photoshop several different ways but havenu2019t figured it out yet.

That is exactly why the option is there. And why it is unchecked. Most people prefer to have smaller report size. The choice is small reports with the option unchecked and the loss of picture quality, or bigger reports with the option checked, retaining the picture quality. THis a by design and is not consiered to be a "bug". If you post the issue into the [idea place|https://ideas.sap.com/community/products_and_solutions/crystalreports] perhaps it will get picked up as an enhancement, but that it the best I can suggest.
- Ludek
Edited by: Ludek Uher on Jun 17, 2011 6:29 AM

Similar Messages

  • How do I save/export an image without a background when using Adobe draw on iPad?

    Hi :-)
    brand new new to adobe draw... Using on an iPad... How do I export/save an image so that it has no background?

    The solution is the following:
    - by default the first drawing layer is white... and will remain so... you have to turn the opacity of this white layer to zero by pushing the white button on the left,
    - then use any of the remaining 9 layers for your drawings,
    - export to adobe Creative Cloud or Illustrator (not as JPEG) and you have you picture with a transparent background...
    Hope this helps..

  • Problem posting images on the forum (color depth)

    I was posting an idea on CVI idea exchange board and was continuously getting a generic error ("Codice di errore: caricamento non riuscito" which means "error code: unsuccessful loading") while trying to add an image.
    After several studies and attempts I realized that the problem is not in the image size or name or whatsoever element but rather in the color depth: it arises with 32-bit images, while you can post 24-bit images without problems. This applies to other forum boards as well (just tested on CVI board and this actual message), I suppose it is a general rule.
    I don't seem to have noted any note on this in the forum help: there exists some documentation on which objects the forums accept as attachments? You know: file types, image types and characteristics, object sizes and so on...
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

    alumltd wrote:
    Greetings SiobhanF,
    Can you please advise HP's preferred method of posting images/pictorial essay of steps tried for solution in query made by posting members!
    Many thanks in advance...
    Click the "Insert Image" icon up in the tool bar when you compose a reply.  It's immediately to the right of the "Insert Link" icon that looks like a chain link.
    Some images have to wait for Moderators to clear them.  This is to prevent users from posting obscene photos, etc.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • How do I copy and paste images without a reduction in size?

    I am working on a project where I want to include several jpeg images that are saved on my computer onto a new single 8.5x11 page in Photoshop. Even though the percentages are the same on both the images and the Photoshop page, when I copy and paste the images onto the page, the size of the images are greatly reduced (from 5" to 1".)  I would greatly appreciate instruction on how to copy images and paste them on to a Photoshop page without the reduction in image size. I have accomplished this task previously and I had no problem. Is there a setting that I am unaware of that I need to change in order to proceed with the project as planned? Thank you for your time.

    You are a genius! That's it. Thank you so much for taking the time to help...

  • APERTURE users: how do we send full size images without compression? Mail compresses, Drop Box, all that have a tag "badges" next to JPEG under 'Info' in Aperture compress? What can I do, HELP Please.

    In Aperture under INFO at bottom it says Badges; if it has an Icon in the block it compresses JPEG image down to KB? Using mail, using drop box with my Aperture and can't figure out how to get rid of 'Badges with the Icon in the box to be able to send full size. Also have been using: "onOne Software" an add on editing program thats awesome, works as a stand alone, Aperture, & Lightroom.
    Bottom Line I can't send to lab my web page, or individule without it compressing. Even created a desk top folder droped & dragged in ZIP & still Compression?

    See this link:  Aperture 3 User Manual: Understanding Badge Overlays
    The badges in the Info panel have nothing to do with compression. The tell you, if your image has keywords attached, if it is a raw or jpeg image, if has been externally edited, or if it is referenced.
    When you send an jpeg using mail, you need to set the image size in Mail to "Acual Size", otherwise will Mail compress the image.  For example:
    If you have really large images, Mail may not be optimal, because the server of the recepient may refuse to accept large Mail attachments.  In that case export the image from Aperture in the resolution you want with "File > Export" and compress it as a zip file. That will not reduce the quality.
    Send the zipped file, if it is small enough, otherwise upload it to an ftp-server.
    The receiver can uncompress it.
    Regards
    Léonie

  • How to extract the mouse cursor image without using JNI

    I want to get the image of the mouse cursor of the system using java. The Robot class captures the screen only, but the mouse icon image is not the part of the screen, so it is not easily detected. But we can get the mouse cursor position using API, but how to get the exact image icon, without using JNI. I don't want to generate my own cursor at that position.

    I am building a Remote Desktop kinda app using java..... I want the screen of the remote comp to be viewed on my screen and generate events from my machine to the remote machine. So, I am capturing the screen images of the remote machine. But the cursor is not part of the screen object. i want to extract the cursor image icon from the remote machine to my machine and render the image.

  • How do I blend background and image?

    I have created a water background image.  I would like to add a rock image.  The result would look like
    How can this be done in Photoshop CS6?

    Good day!
    Could you please post the two images you refer to (sections or low resolution if you prefer)?
    What are you after all specifically?
    The distorsions could be achieved with an application of Filter > Distort > Displace and an appropriate Displacement Map, Filter > Liquify, …
    For the effect of the Reflections and light refractions combinations of Smart Object instances, Adjustment Layers, … seem possible.
    Regards,
    Pfaffenbichler

  • How to fix gray triangle website? I went to add-ons and put Flash to ask to activate but still did not take care of problem.

    These websites had always been secure before. Now I am getting a gray triangle on them.

    That website uses a cipher that is considered weak and thus Firefox shows that warning triangle.
    *TLS_RSA_WITH_RC4_128_SHA

  • How do you view all open images without opening each tab?

    I have been using CS2 for ages, and recently switched over to a recent version of Photoshop. I'm using a mac. In CS2 I was able to drag my mouse to a corner of the screen and view all open files. Can I still do this somehow? Or do I have to open each tab to see the image? I'm looking for a quick way to view thumbs of all my images. Please help!

    If you dislike tabs turn off
    Photoshop > Preferences > Interface > Open Documents as Tabs
    Photoshop > Preferences > Interface > Enable Floating Document Window Docking
    And maybe try
    Window > Arrange > Tile

  • How to fix when message "loading" runs without stop when I want to get I-Tunes or AppStore?

    For couple of days, when I want to get I-Tunes or Safari or AppStore on my iPod touch, message saying "loading" non stop. How to get these applications.

    Try resetting the iPod.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • How to fix grayed out songs in Itunes that are supposed to be matched with Itunes Match!

    I have deleted a few songs that have the cloud symbol in Itunes Match; however, they are now grayed out and I can't play them from the cloud or download them.  Can anyone offer any ideas?  I was doing this to test whether it is matching correctly and now the songs are listed with the cloud symbol and down arrow in Itunes; however, they are unable to be played (they are just gray).  Please help!

    iTunes has a feature that drops leading articles (a/an/the and regional equivalents) for sorting purposes. This enables "The Beatles" to be sorted under B instead of T, a converntion that most people are used to. The greyed out text shows this current autosort value. If you delete the text it will be regenerated. If you try to put in something like a space you will interfere with the proper action of the sort. However you can put "The Beatles" in if you really want them sorted under T. It is important to use sorting values consistently and not not try to give different things the same sort value as this causes problems. You can hide the column if you have no need to review the information in it.
    See Grouping tracks into albums for more details.
    tt2

  • How do you delete multiple email messages without checking off each one at a time?

    Looking for help to figure out how to delete emails previous to certain dates or in large quantity without clicking on each one.  Already held down control button and tagged multiple emails...yet want to delete previous emails in large quantity.
    Thanks in advance for help...

    Click on the first one you want gone then
    1) hold down the Shift and click on the last one you want gone when they are consecutive, then Right click and select Move to trash or Delete
    2) Hold down either the Option or Control or Command key (Sorry I forget which key is used on the Mac for this, It is Control on PC) then click on the individual mails you want gone then as above.

  • How do you split a vector image into several different colors

    Hi, I'm trying to make an infographic for my company and wanted to use an image of christmas tree I found. I put it into Illustrator CS6 and traced it with the 16 colors option ( which i believe makes it a vector). What I want to do is change the colors of the christmas tree on each level of needles, but I can't figure out how to split up the image to change it into different colors. Sorry if this is confusing, any help appreciated.
    Thanks
    Audrey

    Audrey, first off, you should know this:
    Working with "a vector graphic" and working with a vector graphic that is the result of Illustrator's Image Trace are very likely to be very different things.
    You would be much better off if you were starting with a tree graphic that was designed and drawn as a vector graphic in the first place. The people reading your post here can only imagine what's on your screen and how the Image Trace utility might have "seen" and traced it. I'll go so far as to say you won't be able to accomplish what you describe with an Image Trace as the basis. I'm not saying it's impossible, but I do know I wouldn't dare put myself through the anguish of attempting it. Honestly, I think you'll have a better chance of pulling it off if you keep the tree as a raster image, open it in Photoshop, and recolor sections of the tree there. But again, that could be determined with considerably more certainty if I could actually see it.
    As a side note, I'd like to add this: You refer to the christmas tree image as one that you "found." I read that to mean you found it on the Internet. If that's the case, and the infographic you're planning is only for an internal presentation, it's not really a big problem, but even then you should consider acquiring permission or license to reuse the image. However, no matter how you might adapt or alter the image, just about any other scenario involving your re-use of that image could lead to issues of legality. Please don't pirate images.

  • How to reduce size of image without loss quality

    I am website developer design a website http://www.ritikakaur.com/ in wordpress php i am new in photoshop and i want to use some image plz suggest me how can i reduce size of image without loss of image quality.

    Which file formats are eligible for your purposes?
    non-destructive compression has limits, so you may have to compromise.

  • When trying to install Epson R200 driver/utility combo, the installer gets stuck in an endless loop asking for admin password without installing. Any idea how to fix this problem?

    When trying to install Epson R200 driver/utility combo, the installer gets stuck in an endless loop asking for admin password without installing. Any idea how to fix this problem?

    Have you checked on the Epson support site? R200 support is located here.

Maybe you are looking for