How to format the Nonemptymember function in an MDX outline formula

trying to use the NONEMPTYMEMBER function to speed up a complicate nested IIF statement in a ASO cube. Cannot seem to get it to verify.
I simplified it for testing and still could not get it to verify.
IIF(NONEMPTYMEMBER([Currency].[USD_Rate],[Product].[No Product]),0,2)
Thanks
Tom

Try defining the NONEMPTYMEMBER Funtion at the beginning of the formula.
Example:-
NONEMPTYMEMBER [Product] *(you can specify either a single member or member list or you can use NONEMPTYTUPLE for a cross-dimensional member specification)*
IIF(([Currency].[USD_Rate],[Product].[No Product]),0,2)
Regards,
RSG
Edited by: RSG on Jun 14, 2011 9:21 PM

Similar Messages

  • How to remove the sort function on the drill down and then save

    how to remove the sort function on the drill down and then save in the  change local view of the Query
    Is it possible to change the porperties of any characteristic in the local view and then save?
    If so please post the answer.

    I do not think that option is possible.
    Regards,
    Venkata Boga.

  • Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

    I am currently away from my MAC and want to send an email through apple mail with the bcc functionality.  I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help.  Thanks!

    Open your mail,
    lower left corner click on settings,
    go to composing and check BCC, save and your done

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • How to use the CMS functionality in Sun Portal Server 7.2

    Hi All,
    How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
    Has any one used this as I could this in glass fish server.
    Any Input is appreciated.
    Thanks & regards
    Srikanth

    Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
    http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
    Alternatively,
    1. ccd.war has 3 portlets in it:
    (a) custom content definition portlet
    (b) custom content portlet
    (c) workflow portlet
    2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
    (a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
    3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
    Note: In windows, you may not find this file
    4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
    (OR)
    you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
    Hope this helps!

  • How to use the divide() function in bpel

    Hi All,
    How to use the divide() function in bpel.
    pls can u give the one sample example

    2 div 4
    Eg;
    <assign name="Assign_1">
    <copy>
    <from expression="2 div 4"/>
    <to variable="outputVariable" part="payload"
    query="/client:testProcessResponse/client:result"/>
    </copy>
    </assign>
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to get the current function name in java

    How to get the current function name in java.
    In c it is done as
    printf("%s",__func__);
    Thanx in advance.

    j0o wrote:
    System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
    "/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
    "/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
    I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

  • How to disable the purchase function?

    Anyone know how to disable the purchase function from the ipad2? How to disable and empty the payment credit card inform? If not, is it secure?

    None for payment
    After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".

  • How to use the set functions effectively in webi ,please let me know with detail

    how to use the set functions effectively in webi ,please let me know with detail

    Hi,
    we use use set functions on heirarchies with aggregate functions mostly .
    If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
    Member_set can include multiple sets separated by semicolons (;).
    The list of member sets must be enclosed in {}.
    If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
    Eg .
    1)     Ancestor
    =Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
    2)     IsLeaf
    =[Test Hierarchy].IsLeaf
    You can use this function when you want to show your Measure only at lower level .
    3)     .Depth
    =[Test Hierarchy].Depth
    This is also function used with hierarchy to find Level of Members .
    Follow this link for PDF reference .
    Page 147
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
    search on SCN this question was discussed before also one those links .
    http://scn.sap.com/thread/3183380
    Hope this will help you .

  • How to format the value in narrative ?

    Hi Experts,
    In BIEE 11,
    How to format the value in narrative , such as separator.
    In table or pivot property, I have set the separator for measure , but in narrative, the format will be disappeared. So how to implement this requirment?

    I had this problem with 11.1.1.6.0
    If you want this format as the default display format for this column everywhere, then you can save that format as default display format for the column or data type (Lower right corner of data format tab: "Save as Default" button, "Save as the system-wide default for "Table"."Column"). When I had the problem the narratives did use the default display format.
    Another workaround could be a direct database call to convert the data to a string. For example, in Oracle
    EVALUATE('TO_CHAR(%1,%2)' AS CHAR(30), “Table".“Column" ,'$9,999.00')
    but you may need to set EVALUATE_SUPPORT_LEVEL in your nqsconfig.ini, and this ties you to the database technology.

  • LabVIEW webservice: How to format the published XML data

    Hi,
    Im trying to  publish some measurement data with LabVIEW webservice and read the data with Android client. However i have some problems with the XML output from the LabVIEW webservice.
    I want to publish the data in in this form:
    <Response>
     -<Terminal>
            <Parameter> Temperature</Parameter>
             <Value> 5 </Value>
            <Unit> ºC </Unit>
           <Description> Measurements from Sensor 1</Description>
       </Terminal>
    </Response>
    Any ideas how i can do this? i havent found any good example on how to format the XML output this way. 

    Hi,
    You can format the data using Format Into String as shown in the attached snippet. Is this maybe something you can use?
    Willy
    Willy
    Attachments:
    format xml data.png ‏31 KB

  • How to Formate the Font of The Tree's Parent Node ?

    Hello,
    Pls. , how to Formate the Font of The Tree's Parent Node ?
    Other Formatting Aspects..etc.
    Regards,
    Abdetu..

    In ur code is HTREE$ is of type varchar2 or ITEM?
    Give valid parameter for item_name/item_id.
    This code will be usefull to add/change the icon of the node. You can show the 16x16 image (gif, ico based on your forms_home\forms\java\oracle\forms\registry\Registry.dat file) before the tree item's node lebel.
    I tried in this way to get the "Favourites" node label as *"Favourites"* (Bold).
    I make *"Favourites"* as a gif icon (16 x 270) and added it as a node icon. but it shows 16 x 16 of my image.
    So using this code u cannot format the font of the tree's parent node.
    Balaji.

  • ALPS pointing device - how to restore the scrolling function

    Until a couple of days ago, my mousepad allowed me to scroll. I've tried looking at the settings in control panel/mouse but the options have disappeared.
    Is it a driver issue? If so, which driver should I download, and where from?
    The current driver is:
    v5.3.203.18
    and was created 17/07/2003
    If it's not a driver issue, does anyone have any suggestions on how to restore the scrolling function?
    Many thanks :)

    Thank you for your replies :) Unfortunately, I can't rollback as system restore has been turned off as well as all the other odd things that have been happening.
    Eldorado, I'll give your suggestion a try :)
    Once I've uninstalled and rebooted, will the laptop definitely find the driver automatically when it starts up?
    I'm worried that it won't, and that I won't be able to use the computer...

  • I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    Step by step:
    1. On your main vi Front Panel, create your boolean indicator.
    2. On the block diagram, right click the new boolean indicator and select Create - Reference.
    3. On sub-vi front panel, create boolean indicator (or use one that is already created).
    4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
    5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
    6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
    7. Wire the BoolRefnum to the reference input of the property node.
    8.
    Right click on the property node and select Change to All Write.
    9. Move mouse to point to Visible inside property node box, left click and select Value.
    10. Wire the boolean indicator from step 3 to the Value input of the property node.
    11. On sub-vi front panel, right click on icon and select Show Connector.
    12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
    13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
    14. Save and run.
    Here are the modified vi's.
    - tbob
    Inventor of the WORM Global
    Attachments:
    Pass_a_Reference.vi ‏20 KB
    GL_Flicker_mod.vi ‏83 KB

  • How to know the packages,functions,triggers owned by schema

    I got the script to find the tables,columns and indexes belonged to a schema
    how to find the packages,functions triggers owned by a schema.
    I need to compare schema of PROD with UAT
    Any help will be appreciated

    is it possible to find the source of all those
    objects in a single scriptWhat do you mean?
    user_source will give the script?Yes.
    You can get script more easily with DBMS_METADATA
    SQL> drop FUNCTION "HR"."F11";
    Function dropped.
    SQL> CREATE OR REPLACE FUNCTION "HR"."F11" return varchar2
    as
    v_date varchar2(1000);
    begin
    select to_char(sysdate,'mmddyyyy') into v_date from dual;
    return v_date;
    end;  2    3    4    5    6    7
      8  /
    Function created.
    SQL> set pagesize 0
    SQL> set long 90000
    SQL> select DBMS_METADATA.GET_DDL (
    'FUNCTION',
    object_name,
    'HR')
    FROM    all_objects
    WHERE owner = 'HR'
    AND object_type ='FUNCTION'  3    4    5    6    7
      8  /
      CREATE OR REPLACE FUNCTION "HR"."F11" return varchar2
    as
    v_date varchar2(1000);
    begin
    select to_char(sysdate,'mmddyyyy') into v_date from dual;
    return v_date;
    end;
    Is there any script to identify source for all those
    objects

Maybe you are looking for

  • I can't burn a CD in iTunes. Error 2131, I can't burn a CD in iTunes. Error 2131

    Error 2131 comes up on my laptop.  The following information  is provided when I analysed a little further.  Any help is appreciated. Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002) MEDION WIM2140 iTunes 10.6.3.25 QuickTime n

  • How do you copy and paste a photo from the internet without a mouse?

    Does anyone know how to copy and paste a photo from the internet without a mouse?  I would appreciate a response asap.  Thanks.

  • SSO in resource adapter : Subject=NULL

    Error while trying to use SingleSignOn in resource adapter deployed in WebLogic server 8.1 Hi, To support SSO in Resource Adaptor all steps were produced as described in WebLogic site: http://e-docs.bea.com/wls/docs81/secmanage/credential_maps.html#1

  • Adobe CS3  multiple problems

    Product Name: Bridge CS3 Operating system: Intel Dual Core Kind: PC 4ghz Ram Problem 1: When I open bridge CS3 I get this message: This application requires an Intel Pentium 4 Intel Celeron, Intel Core duo or intel core 2 compatible processor. ( 0/6/

  • Single Beep, Display cuts out, then comes back

    I've had my macbook for a little over a year. Recently the hard drive died. I replaced it, and figured I'd put new memory in it while I was at it (2GB, Samsung). For a while I ran 10.4 (I was on vacation and didn't have access to my external), and ev