How to generate dynamic param file

Hi, Can anyone please tell me how to generate dynamic parameter file from a table. Table has following structure: create table parameter_temp{Folder_name ,Workflow_name,session_name,parameter_name,parameter value} This table stores all the parameters for all the workflows. How can I generate parameter file for specific session or workflow. Thanks,

Hi All, I have a scenario to implement.Need urgent help. I have relational source which has below fields. ID,Account,AccountType,Balance1,1001,GL,46567.901,1002,SL,56889.971,1003,Equity,45543.9081,1004,GL,89.541,1005,SL,-56889.971,1006,Equity,-45543.9081,1007,SL,-42777.45 Here my first requiremnt is to check if the balance value for entire file is 0 and if balance amount for each AccoutType is 0 , if both condtionn satifies the flow will go , else load will fail. I tried in below approach. SQ >> Expression >> Aggregator In aggregaor i have first calculated sum(balance) for entire file by group by on ID column in an aggregator , and keep actual data in expression transformation. Then i took an expression to connect actual data with the sum(balance) , since i need to perform further calculation.I tried connecting expression and aggregator , but it is not allowing me to connect the posrts. And if i am using a joiner , then wrong data is loading to target. It is joining each result of aggregator with actual ports in expression. I am not sure how to handle this scenario, so that we can just calculate sum of entire file and sum on basis of account type , is both sum are 0 then load the target , else fail.

Similar Messages

How to generate an XML file for an animation of IK armature

Can someone please tell me how to generate an XML file for an animation of IK armature.
I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature. I need the XML information from the animation.
When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
Thank you,
c

I hope that's not the case. I want to write to adobe about it. I think it's a great feature and it functions really well even though it is not a very developed IK tool. My biggest issue with it is ouput options and integration with motion tweens.
I have seen a lot of examples of animators using it online, just no one talked about output. I just feel it hasn't been developed. It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens. I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

How To Generate Debug Log Files for ebs jsp?

hi How To Generate Debug Log Files for ebs r12 jsp?
and where i get the log .please help me thanks!

Please check following MOS Document
Oracle Application Server Diagnostic Tools and Log Files in Applications Release 12 (Doc ID 454178.1)

How to generate .SQL format file from oracle database?

How to generate .SQL format file from oracle database?
I have a database of Oracle 8.1.6,now want to generate script file (including table structure,index,etc.) from it,What should I do?
Thanks.

Your question pertains to the Database Export/Import. This forum exclusively focusses on the export/import utilities that come along with "Oracle Portal" which is a web-based tool. Could you please post your question under the RDBMS export/import or migration forum.

How to Generate a Java file for a JSP Page

Hi ,
I am using weblogic11 .
I am working on a JSP page which nearly consists of 4000 lines of code.
I need to debug the file , but weblogic server is not generating the java file for the JSP pages .
Please let me know how can i genertae Java file for the jsp pages ??

JSPs are compiled into servlets automatically and those classes are stored in WEB-INF/classes folder. Servlet engine handles servlets.

How to generate a Text file from a Report

Hi Friends,
I need to generate a Text file foramat from my Report.My client is having a text file in a standard format.I need to Generate this Text file according to that text format.
My requirement is For one production order there will be so many line items and for each line item based on its Quantity i need to generate serial numbers.
For Ex for Production order 100 there r 3 line items.If 1st line item is of Quantity 20.I need to Generate 20 serial numbers for the 1st line item and the same for the remaining line items also.
How can i proceed.I need to do dis based on the production order Number.
In d selection screen i need to put the fields Production order Number and From:----
To:----
and u button Generate Text file.If I click on Generate Text file Text file should be generated.
Thanks & Regards,
Chitty.
Edited by: chitty d on Mar 12, 2009 5:44 AM

Hi,
As far as i understand from your requirements, it like you need all the data item leve into a text file.
You can fetch all the relevant data from variuos tables and then use GUI_Download into a text file.

How to generate an XML file from SSIS (based on an XSD)?

I have an XSD that describes an XML format. I also have a sample XML file as well from the XSD. I am trying to understand SSIS's capability to generate the XML file in an ETL process. I would need to create the XML file based on the XSD that
I have. It is safe to assume that all the data elements are in the DB that I am incorporating in the ETL and it is also safe to assume that the data in the XML may be from multiple different tables (so massaging is probably necessary).
Would this be a job for C#/VB or can I do this through an SSIS process/task? Please help me understand my options. Thanks.

Dear All,
Indeed the post by RamJaddu did not answer the question. I am having the same issue: I have been provided an .xsd file which contains a data schema, and I have all of the necessary
data in a .mdf file in order to create the required .xml file. Having queried SQL Server and received my data in "myDataSet" I can use C# to create the .xml ignoring the schema using
string strSchemaFile = @"F:\Documents\UserCost\VictorianDataCollection\VCDCSchema_v2.xsd";
string strXmlFile = "testXmlExport.xml";
myDataSet.WriteXmlSchema(strSchemaFile);
myDataSet.WriteXml(strXmlFile, XmlWriteMode.IgnoreSchema);
but how do I export the .xml file so that is conforms with the .xsd format?
If any of you have worked this out the answer would be most appreciated.
All the best,
Nick
"Everything should be made as simple as possible, but not simpler" - Einstein

How to generate a pdf file

hi i want to generate a pdf file using a java program, i have a string of xml format i want read the string and get each node of the string then
pass it to generate pdf.how to do this, the problem is if i want to read
xml then i must use org.w3c.dom.Element, but for pdf generation i must use com.lowagie.text.Element , so how to solve this.
please help.
rafel

Well, obviously XML and PDF are two very different kinds of format, and it's up to you how one is going to be mapped into the other. There are at least two PDF APIs available free, but it's not a trivial format to manage.
It's impossible to give you any more advice with the limited information you've supplied.

How to generate individual HTML files from linked help?

Hi folks,
I'm trying to figure out how to generate individual web pages - based on heading types - from a help project this is linked to a FrameMaker book.
I'm linking to the FM book, rather than importing, because the import process ruins my graphics. So, I know how to create individual web help pages using the import process; but that's not an option for me. (The graphics issue is a whole other discussion, which I've since given up on.)
So, I'm using TCS 3.5 (RH9 and FM10). I've successfully linked to the FM book. Each topic represents a complete chapter and includes a single Heading 1 for the title and several Heading 2's. Again, these are all in the same help topic because I'm linked to the FM book.
What I want to do is generate the web help so that new web pages (files) are created. In other words, I want breaks before each Heading 2. I want the resulting web pages to be named based on the Heading 2.
Is this possible?
Thanks for reading,
Tom

I’m not sure I understand the problem (I’m using FM 10, RH9, TCS3): You can adjust .isf and all Conversion/CSS mapping, etc settings for an existing project (Linked or Imported) at:
File > Project Settings > FrameMaker Document > Edit Conversion settings for FrameMaker documents: (click Edit button).
Then, Go to FrameMaker Settings > Paragraph > Heading 1 etc. and click the box for Pagination.
What I don’t know is if you have to re-do your linking process from scratch to do your pagination settings right the first time (like create a new project with your Frame docs, which shouldn’t be hard to test if you have saved your CSS, Master Pages etc), or already have an .isf file with proper settings that you can specify at time of first import/linking. I already had these in place when I set up my linked project of a Frame book with 13 chapters – 350 pages – resulting in over 300 separate HTML files/topics (set H1, H2, and H3 levels to paginate). I don’t know if you can change these things post-linking, but it can definitely be done!
There is definitely no reason to have to have an entire FM chapter as one topic in RH. You may have to create a new project to achieve your desired results, I am not sure.
I hope this is helpful. Regarding RH ruining your images, I know what you mean. Through a painstaking process of research, trial, and error, I found that these Image options in the Conversion Settings produced the best results for me, though not as good as “ideal:”
·         Check the box for “Use Distiller to Generate Image”
·         Leave the “Do Not Regenerate Images” and “Preserve 3D Images” boxes unchecked
·         Under Preferred Dimensions: Check “Maintain Aspect Ratio” and check Width and Height – Set both to 0pt. (*This one was a key tip.) Leave “Scale” unchecked. (Scaling seems to do terrible things in RH.)
·         I left the Max Dimensions settings unchecked.
·         Set my personal preferences for margins (2pt all sides) and borders (solid, gray, 1 pt)
·         Under Advanced, Default format of PNG with color bit depth of 24. My graphics are all screenshots, so this is the reason for this in my instance.
Regards,
Virginia

How to pass dynamic params to Transaction iView from webdynpro java app

Hi Experts,
I am trying to call a transaction iview in PCD from my Dynpro application with a dynamic param.
Can somebody help me generating the URL for transaction iView and passing the dynamic params???
Thanks in advance
biroj...

Hi,
Generating the URL:
StringBuffer strBuff = new StringBuffer("/webdynpro/dispatcher/xyz.com/xx~xxxx~xxxxx/xxxxxApp");
strBuff.append("?");
strBuff.append("TCODE=");
strBuff.append("" + WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("TCODE"));
IWDWindow window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(strBuff.toString(), "TCODEWindow");
window.show();
Please try the above code snippet helps you to create a TCode iView in a new window.
or
We can include URL parameters in a portal URL that calls a Web Dynpro page and these parameters can be forwarded to the otehr iVIews on the page.
Example:
http://xxxxxxxxx.com/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.WebDynpro?System=SAP_XXXXXXXX&WebDynproNamespace=xxxxx.com&WebDynproApplication=xx~xxxx~xxxx/xxxxApp&DynamicParameter=u201DTCODE=VA02u201D
For more information Please go through this:
http://help.sap.com/saphelp_nw04s/helpdata/en/c3/235a428a1e9041e10000000a1550b0/frameset.htm
Thanks
Krishna

Is anyone know how to create dynamic pdf file from a JSP page or Servlet ?

Hi
Is any one know how to create a dynamic PDF file from JSP or servlet. I need to have standard form format needs to be created and want to send the info to that form dynamically.
Is there any libraries available?
Thanks

I posted a link in this thread to a lib that lets you create PDFs from an app. They have a Java version. I have not used it but I know someone who used it with Microsoft ASP and they liked it.
http://forum.java.sun.com/thread.jsp?forum=31&thread=287285
-S-

How to generate the ATR files for reports with out manually?

Hi all,
how to create the ATR files for reports in OBIEE 11g with out manually?
is there any other method to create the ATR files by using the OBIEE Server?
please provide me the solution for this?
we are creating manually for each and every report, it is time taken process how can we generate ATR files automatically
by using the OBIEE Server?
Thanks,

Hi,
I am afraid not.ATR are attributes files contains the object's full name, access controllist (ACL), description, and so on.Each catalog object has a corresponding attributes file, I am not sure why do you have to generate the atr files.In case you need info about atr files: http://businessdecisionsystems.com/blog/?p=7
If you have huge number of similar reports(with filter variations and same kind of layout), try to play around with the xml to minimize the development effort.
Rgds,
Dpka
Edited by: Dpka on Oct 4, 2011 12:00 AM

How to generate an XML file

Hi,
How do we generate an XML file from data in an internal table.
Regards
Rani

Hi Rani,
Take a look at thread:
XML to ABAP
Regards,
John.

How to generate .build.appxrecipe file

Hi!
I would like to generate using m s build utility or may be something else .build.appxrecipe file. Does anybody know how i can do this?
VS generates it automatically, but i want to generate .build.appxrecipe file by me.

Here's the documentation:
https://msdn.microsoft.com/library/windows/apps/hh924768.aspx?f=255&MSPPError=-2147217396
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

How to generate this xml file?

Dear experts,
     Could you please tell me how to generate to below xml file?
<?xml version="1.0" encoding="utf-8" ?>
- <faxmakerdata>
- <RECIPIENTS>
- <FAX>
- <RECIPIENT>
<FIRSTNAME>><![CDATA[]]></FIRSTNAME>
<LASTNAME><![CDATA[]]></LASTNAME>
<COMPANY><![CDATA[]]></COMPANY>
<DEPARTMENT><![CDATA[]]></DEPARTMENT>
<EMAILADDRESS><![CDATA[]]></EMAILADDRESS>
<NUMBER><![CDATA[2937]]></NUMBER>
<VOICENUMBER><![CDATA[]]></VOICENUMBER>
</RECIPIENT>
</FAX>
</RECIPIENTS>
</faxmakerdata>
I have used "SDIXML_DATA_TO_DOM " but there will appear <Item>
could you please tell me how to do?

Hi,
    after SDIXML_DATA_TO_DOM fm Use SDIXML_DOM_TO_XML to convert DOM to XML
    then u can use any download file FM .
DATA:
    TABLESTATS           LIKE MSSTABSIZEINFO,
    IVALUE               TYPE I,
    BEGIN OF VERSIONTAB OCCURS 0,
      VERSIONDAT         LIKE SY-DATUM,
    END OF VERSIONTAB,
    CMD(384)             TYPE C,
    XML_AS_STRING        TYPE     XSTRING,
    DOCUMENT             TYPE REF TO IF_IXML_DOCUMENT,
    DOM                  TYPE REF TO IF_IXML_ELEMENT,
    TABLENAME(128)       TYPE C,
    RC                   TYPE SY-SUBRC,
    L_EXISTS             LIKE DD02L-ACTFLAG.
convert table to a DOM
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
    EXPORTING
      NAME        = 'spinfo'
      DATAOBJECT = SPINFO[]
    IMPORTING
      DATA_AS_DOM = DOM
    CHANGING
      DOCUMENT    = DOCUMENT
    EXCEPTIONS
      OTHERS      = 01.
IF SY-SUBRC = 0.
    CALL METHOD DOCUMENT->APPEND_CHILD
      EXPORTING
        NEW_CHILD = DOM
      RECEIVING
        RVAL      = RC.
    IF RC = 0.
    convert DOM to XML
      CALL FUNCTION 'SDIXML_DOM_TO_XML'
        EXPORTING
          DOCUMENT      = DOCUMENT
          PRETTY_PRINT = 'X'
        IMPORTING
          XML_AS_STRING = XML_AS_STRING
          SIZE          = IVALUE
        TABLES
          XML_AS_TABLE = XML_AS_TABLE
        EXCEPTIONS
          OTHERS        = 2.
      IF SY-SUBRC = 0.
        MOVE XML_AS_STRING TO XML_AS_STRING_OUT-XML_STRING.
        MOVE IVALUE TO XML_AS_STRING_OUT-LENGTH.
      ENDIF.
    ENDIF.
ENDIF.
Salil...

How to generate dynamic param file

Similar Messages

Maybe you are looking for