How to generate SCS=FINISHED event and skip phase STOP_SCS_INITIAL_ADDIN

Hi all,
My SapEhpi 'upgrade' from ERP 6.0 to ERP 6.04 EHP4 is stuck in phase STOP_SCS_INITIAL_ADDIN
This phase stops the SCS with a wrong parsing of the OS stopsap command
So this phase is stuck, and the ABAP part stops in PHASE GETSYNC_SCS_FINISHED and waits for this Java part to finish and generate an SAPJup SCS event
My questions:
1:
How can I change / override the behaviour / creation of this errourness OS command so it will return without errors?
2:
How can I skip this Java phase, since I did its work directly at OS-level?
i.e. how can I fool the SAPJup that this phase is finished?
3:
How can I generate the SAPJup SCS event, so that the ABAP part will continue?
Kind regards,
Paul Hoogendoorn

Hi Sunny,
The error is caused bij a wrong parsing of the OS command:
It creates the command: stopsap .. INSTHOST(AMPL-AS01)..
But it should create stopsap .. INSTHOST('AMPL-AS01')..
This is an small error in the sapjup, wich will be solved soon by sap on i developer.
In the meantime: don't use host names wich include a '-' hypen during EHPi upgrade, alltough that are valid host names.
Kind regards,
Paul Hoogendoorn

Similar Messages

  • How to Generate a ReportError Event

    I'm sure I'm just missing something here.  Our LabVIEW GUI has a registered event Callback for ReportError.  In TestStand I handle errors with SequenceFilePostStepRuntimeError and ProcessModelPostStepRuntimeError callbacks.  I used the error handling example and modified to basically just show a popup with the error message.  My problem is how to generate the ReportError event so our GUI can take the appropriate action.
    I don't see it listed under the given UIMessage event codes.  I can't find it anywhere.  So the questions is where do I generate the ReportError event within TestStand?
    Thanks.

    Hi Sir Mutt,
    If my understanding is correct, you are using LabVIEW as your operator interface to start the Teststand Application and you want to do Teststand Error Handling in LabVIEW. The most common way that this is achieved is through ActiveX Invoke and Property nodes as well as ReportError events. I have attached two screenshot examples of this. Does this sufficiently address your question or did I misinterpret your question?
    Regards,
    Jackie
    DAQ Product Marketing Engineer
    National Instruments
    Attachments:
    ReportError Callback.png ‏8 KB
    Teststand Error Handling.png ‏20 KB

  • How do one add FCP Events and Projects created in previous versions

    Just upgraded to OS X Yosemite and FCP X 10.1.4. The files that I saved under a seperate folder (which I named as Unused Events/Projects) did not convert. How do I get those Event and Projects in new Macintosh HD's projects and events?

    TThe fiolders have to be in specific locations to be recognized by FCP. They have to be in Final Cut Events and Final Cut Projects either at the root level of a secondary drive or in the Movies folder.

  • How to detect window close event and do some task before exiting

    Hi 
    Anyone knows how to detect window close event and do some task before exiting ?
    Sridhar
    Solved!
    Go to Solution.
    Attachments:
    window close event.JPG ‏34 KB

    Yes .You can discard the panel close event by passing "TRUE" boolean value to the "discard ?" terminal which is lied in the right side of that panel close(filter) event.& It will work in executables.  See attached picture.
    Attachments:
    Panel Close.JPG ‏12 KB

  • How to generate selection change event through code in JTree?

    I am developing an application which downloads the file from other system and adds it into the tree. On selecting any file in the tree I m displaying it's contents. But now i am trying to display the contents of downloaded file as soon as it's download completes. Here i am not getting the way to how to generate the event as the download completes, because i tried that setSelectionPath(TreePath path), but it also don't generates the selection change event. Is there any other way to do so?

    Put null in place of oldLeadSelectionPath. From the API for TreeSelectionEvent:
    protected TreePath     oldLeadSelectionPath:
    leadSelectionPath before the paths changed, may be null.
    I'm at the office and can't try out anything, so please let me know whether that works for you.
    db
    edit Or it may be easier to put all code from your valueChanged (...) override in a new method and invoke that method both from valueChanged (...) and wherever else you need.
    Edited by: Darryl.Burke

  • How can I move my Events and projects to an exterior disc?

    When working in FCPX, I have been getting an alert that my (laptop) startup disc is nearly full, and I should delete files to make more space.
    How can I move my final cut events and projects to my external drive?
    I have already copied the folders Final Cut Pro Events and Final Cut Projects to a LaCie 2T drive, but I hesitate before emptying the trash on my laptop, afraid that FCPX will not be able to see my projects/media.
    I am running FCPX 10.0.5 on a MacBook ProRetina with version 10.7.5 OS
    Thanks for any help you can give me.

    In that version, as I recall, you can simply move the projects and events from one mounted drive to another working from within the FCP UI.  Since you've already  copied the files, see whether they open. You may need to use the Organize (or Consolidate – can't remember) command if your files are not all within the moved event.
    Russ

  • How do I move an event and keep the favorite clip selections?

    Hi all,
    I have to move several events from one external hard drive to another.  On many of these events I've already started selecting favorite clips.  When I moved my first event it erased my favorite selections.  Not good.  That took a lot of time and work.  How do I move events and save the favorite clip selections within each event? 
    Thanks,
    ggbeamer

    It would be a good idea to learn iPhoto - the iPhoto '09 tutorials will help - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. and there are iPhoto '11 tutorials under the help menu
    A small investment of time now will save a lot of time and lost photos later
    LN

  • How to delete all the events and create new events from scratch?

    I have all my photos separated into albums and I would like these albums to be considered events in iPhoto. The problem is that there are already lots of events in my iPhoto library that are not "real" events. It just so happens they were uploaded at a certain time and during one of my upgrades of iPhoto all these different uploads became different events. Of course, there are some albums I would like to become a single event as well...but I am not sure how to strip all of my photos of events and then add the photos to new events?

    Select all the pics in an Album and Flag them.
    Then go Events Menu -> Create Event from Flagged Photos
    A new Event is created that moves the pics from their existing Event
    Unflag the Photos then move to the next album. Repeat.
    Regards
    TD

  • How to generate an output waveform and a pulse

    I want to
    generate a waveform and a pulse with LabView and PCI-MIO card.
    The waveform must be a sine with a frequency of 1 Hz and sampling frequency 10
    Hz. The pulse must be a square signal between 0 and 5 V with frequency of 10
    Hz. Every point of the sine waveform must be synchronized with every point of
    the pulse. The pulse is used as a trigger for a digital camera.
    I have been looking at the DAQmx examples but I haven't succeeded.
    Any comments on the best way of doing this?

    Hi Raimon,
    Look at attached VI,
    Here i am first building 2 waveforms sine and square of 10 hz, 0-5V and generating them on ywo analog output channels.
    You can use the logic of creating the two singals and for AO generation that i have shown in this VI.
    If you want AO to be regenerative/non regenerative, find the relevant  example AO generation VI's, modify it to generate functions generated by my VI and go ahead.
    regards
    Dev
    Attachments:
    generate multiple voltage.vi ‏112 KB

  • How to generate a keboard event?

    I need to make my application more accessible to keyboard
    only users. This requires me to add an eventlistener for keyboard
    activity and filter the TAB key. I wish to issue a keyboard event
    for the ENTER key when the TAB key is pressed by the user. How can
    I generate the ENTER key please?

    Hi Sir Mutt,
    If my understanding is correct, you are using LabVIEW as your operator interface to start the Teststand Application and you want to do Teststand Error Handling in LabVIEW. The most common way that this is achieved is through ActiveX Invoke and Property nodes as well as ReportError events. I have attached two screenshot examples of this. Does this sufficiently address your question or did I misinterpret your question?
    Regards,
    Jackie
    DAQ Product Marketing Engineer
    National Instruments
    Attachments:
    ReportError Callback.png ‏8 KB
    Teststand Error Handling.png ‏20 KB

  • Time zone support help: how do I enter an event and have it keep that time regardless of time zone?

    I consistently enter events in one time zone, because that is just easier. I would prefer it KEEP them as entered, not revise them as I travel. IE, I live overseas and constantly travel. It is very difficult to keep track of my schedule if I must always calculate the time zones when entering or viewing events. How do I set it up to leave them as entered, even as I travel, without changing the ipAd clock to stay in one time zone?

    Hi karlsf!
    It sounds like you may need to adjust your time zone support settings. An article about doing this can be found here:
    iOS: How to adjust Time Zone Support for calendars
    http://support.apple.com/kb/ht4576
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How to generate parent node id and child node id from xmltable ?

    Hi All, Below is a part of the xml data which is loaded in a table. I need help in generating the parent id for compensationReference say for the first occurence of compensationReference node it should be 1 and for subsequent nodes 2,3,4,.. Can some one please help me in getting this done using a sql query ??                                                         VID                          9100000013890660                                                        ACN                          5924112896                                                                          VID                          9100000013890678                                                              ACN                          5924112896                                                                                VID                            9100000013890611                                                                    ACN                            5924112896                                                                                        VID                                9100000013890645                                                                          ACN                                  5924112896                              Thanks, Bhaskar

    that doesn't look like XML data to me.
    Please post some correct example data and expected output as described in the FAQ: Re: 2. How do I ask a question on the forums?

  • How can I transfer iMovie Events and Projects ?

    Hey,
    I wondered how I could transfer a single Imovie Event with all the unedited Clips inside, and the Project, which is in Work Process right now to another Mac, so that it opens in Imovie on the new mac and I can continue workingon it
    Thanks
    thomas

    IMovie->Help->iMovie Help->Copying or moving a project to an external hard disk

  • Voice command , how to generate the coefficien​ts and output as matrix

    Hello. I am trying to do a program that can tell"1.2.3.4"   I found a template on the internet,Firstly it generate the coefficients and output it to a Real Matrix  just like the following picture. However,I don't know how can I record my own coefficients in the matrix, how can I introduce these in my dictionary,could you please help me out?

    Don't start multiple threads. It just wastes people's time. Keep it to the original thread - http://forums.ni.com/t5/LabVIEW/labview-voice-reco​gnition-how-to-transfer-your-voice-into-MFCC/m-p/2​...
    Try to take over the world!

  • HCM P&Forms:How to create a user event and scenario step mapping

    Hi Friends
    I have a problem with Form Scenarios --> Other Attributes -->User Events:
    At present the values are: Operation :- the_operation_name
                                               Field Groups :- Field Group assigned
                                               Usable from scenario step :- Emp_Req_scenarion_stepname1
    I need to enter a new mapping here so that the operation is available in another scenario step as well.
    But in the edit I can enter only the operation name, not able to enter the scenario step.
    Can someone please suggest a solution or work around. Your inputs are appreciated.
    Thanks!
    Sajimol.
    Edited by: Sajimol Unni on Mar 2, 2010 11:54 PM

    Not quite true. A "user event" looks at what fields you selected for your "field group" for the event. Then ANY operation that has that field associated with it will get called (unless a "rule" stops it). User Events in HCM P&F are REALLY BAD in my opinion (I have ranted on them in many threads, blogs etc.). There are ways to deal with them and also ways around using them (see my blogs). I think this is one area in HCM P&F that needs a major overhaul/re-thinking.

Maybe you are looking for

  • Messages not showing up in Message Folder

    I am not receiving any text messages in the message folder. I can search for them through the search function and I am receiving them on my phone, but only the email messages show up in the folder. I checked all of the options and I can't figure out

  • IMac Continually Dropping WiFi Connectivity

    Due to appalling wired "broadband" where I am, I have to connect by tethering an iPhone 5 over an HSDPA cellular connection. That's all fine. The trouble is that my late 2012 27" i7 iMac keeps losing connectivity although it continues to be - apparen

  • Used migration asst from  iMac to new iMac successfully EXCEPT that NONE of my iTunes library migrated.

    Can still gain access to old iMac if necessary. Everything on the old machine was backed up to a LaCie hard drive. Can't connect Lacie directly to the new machine because the LaCie connection to old iMac is firewire.

  • DW CC new document types limited?

    I just installed DW CC, and the dialog for "File...New...Blank Page" is limited to 12 types, and the starter layouts are also few. (For example, just 2 layouts for a HTML page). CFM and CFC are not even on the Page Type list. I do see the starter fil

  • IC Web - Transferring verible values to Model

    Hi, Currently I am facing a problem in IC Web page, where in a variable value has to be saved in CRM Service ticket transaction. The variable value is computed in the controller class (Before on_save() method) and assigned to a Context node by callin