How to get a list of user who is shared with particular workbook

Hi everyone,
I have duplicated a workbook and made some changes on the new one. Now I'd like to share the new one with the same list of user as the old one.
The number of user is great, more than 500.
I would like to know any SQL that let me get a list of user who have been shared with the old one, such that I won't miss anyone of them.

Hi,
I would like to know any SQL that let me get a list of user who have been shared with the old one, such that I won't miss anyone of them.Refer to these documents.
Note: 293021.1 - How to Find Out the Sharing Information for Discoverer workbooks From the Database
Note: 375777.1 - How To See Which Discoverer Workbooks Are Owned And Shared By An Existing Or Dropped Database User
Thanks,
Hussein

Similar Messages

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

How to get a list of users currently logged on to InfoView?

Post Author: ak004
CA Forum: Administration
Hi,
Is there an option in CMC that gives the list of concurrent users currently logged on into the Infoview? I have CR server XI and Settings in CMC currently just gives the number of users logged in. I am using Enterprise security for the users.How can I get the list of users logged in?
Appreciate your help.
Thanks

Post Author: jsanzone
CA Forum: Administration
The quickest way to see who is logged in is to go to the CMC, then click on Servers, then click on the .cms entry (it's the second one down on the list for my system). When you click on the cms link on the next page should be a list of users currently logged in (including you the administrator).

How to find out list of users who have access to particulat SID

HI
How to find out the list of users who has access, to a particular SID?
Satish.

jurjen,
Thanks for replying, actually i was trying to navigate and execute the report using, SUIM...
could you help me to find out the list of users who has access to a particular system.. using SUIM.
satish.

How to get a List of Users Currently Logged into the portal

Hi,
Im trying to get the list of all users logged into the portal to do a web service, but I can't find the way to do this, is there any way to find this info thrugh a java class or some object in the RCU/schema/WCP database?
Greetings
Mike

Try the analytics tables. Before you can use them, you need to setup the analytics server and configure it for your application:
http://docs.oracle.com/cd/E23943_01/webcenter.1111/e12405/wcadm_analytics.htm#BEIDBHHG
This gives an overview for building reports: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_analytics.htm#BABFDGEG
Login metrics: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_analytics.htm#BABFFHGD
You can use these queries to get the info you want.
Edited by: Yannick Ongena on Oct 8, 2012 8:00 AM

Can I get a list of users who have a specific authorization role?

Hello,
I'm wondering if there is a BAPI or FM that takes as input a single authorization role and gives me back a list of all users who have that role?
Thx.
Andy Jacobs

hi,
please check the below FM
'PRGN_1001_READ_USER_ASSIGNMENT'
jaffer ,
Please reward the helpful answers.

How to get a list of users? Any FM?

Hi guys,
is there a function module for getting the list of R/3 users?
Thank you, AR

Hi "ABAP"??
types : lv_bname type bname.
data : lt_bname type table of lv_bname.
Select BNAME from USR01
into lt_bname .
U get all the users in the internal table lt_bname
Reward if useful
Cheers
Kripa Rangachari.

How to get a list of users in cms that have viewed a report?

Hello.
Is there a query that I can use in Query Builder to find out the users that have viewed a report - or a set of reports, and how many times those users have viewed the report(s) within the past year or so?
Thanks
Joel

Hi,
You can not get these details from query builder as it does not record the action (e.g. View) that is performed on a particular object, this is recorded only in Audit database.
You would need to enabled auditing and create a report on audit database to get the required information.
There is lot of information available on SCN for auditing, searching the forum might help.
Thanks,
Prithviraj

How to find out list of users who has logged into webtools

Hi All,
From a database administration and monitoring traffic point of view we want to know who has logged into our web tools web site for a given period. Is there a easy way to have this information. basically user ID , date and time are info we need. (need all users - with or without orders)
any ideas welcome.
Regards
David

Hello,
The easiest way to accomplish this is by creating a report.
Use the SQL query
SELECT     UserID, LastVisitDate
FROM         Users
ORDER BY LastVisitDate DESC
And a template that looks something like this:
<html>
<head>
<title>%%ReportName%% - %%Today, {0:d}%%</title>
%%StyleSheet%%
</head>
<body>
<center>
<h1>%%ReportName%%</h1>
<table width=800 cellpadding=1 cellspacing=0 border=1>
<tr>
<td><b>User ID</b></td>
<td><b>Last Visit</b></td>
</tr>
<section name="uservisit">
<tr>
<td>%%UserID%%</td>
<td>%%LastVisitDate%%</td>
</tr>
</section>
</table>
</center>
</body>
</html>

How to get the name of user who last changed the settings of process chain

Hi All,
I have a process chain which runs daily. At one atep it would load data till PSA then there was a separate process to update data from PSA. But recently someone changed the settings and data is loaded in PSA and data target in parallel. But the process update data from PSA is also there still and as a result giving error as data already reached infocube. I wish to know who changed the settings. I searched and found about tcode SGL1 but not getting any fruitful result. Can anyone pls suggest anything.
Thanks in advance,
Sananda

Hi There,
In your case, nobody has changed the settings in process chains. However, it appears that someone has changed the Processing mode in the Info package. Since now the infopackage has already run after the change was made, I don't think there is any way to find who has changed the setting in the infopackage.
However, the solution would be to just switch back the processing mode from "PSA and Data Targets in Parallel" to "Only PSA".
Regards,
Hemant Khemani

How can I get a list of users with reset password ability?

We are trying to tighten our security, but thanks to the environment we are in this is a bigger task than it should be. As part of this I have been asked to get a list of users who have the ability to reset other users passwords. there are the obvious suspects,
domain admins, service desk etc., but we also appear to have random people who can do this because of a requirement during test or development stages way back. Is there a way to get this, I looked at using powershell but there doesn't seem to be much out there
to give me a pointer, things like ADManager+ do not work, when I try to search on permissions it sits there doing nothing then crashes.
Is there a way to build a function using powershell that can do this or is there some third party cmdlet or app that will provide me this info?
Any help gratefully accepted.

Hi,
Based on my knowledge, except for those default groups users, such as domain admins and enterprise admins and so on, have reset password ability for other users, we can use delegation control to give other common users permissions to reset password for others,
to view or delete Active Directory Delegated Permissions, please go through the below article:
https://social.technet.microsoft.com/wiki/contents/articles/6477.how-to-view-or-delete-active-directory-delegated-permissions.aspx
And if you were editing single user's security tab to give specific users reset password permissions, then I think we should create a script to get all those users, for scripting, please also post in the official scripting guys forum:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Regards,
Yan Li
Regards, Yan Li

How can I get a list of users

How can I get a list of users who work now in B1

Hello Tasha,
Do you want to get the run time user list or enabled user of B1? For the second one, you can use Users object from DI API. I don't think you can get the run time user list.
In addition, to get a more effitive feedback, here are some suggestions of how to post a question. Please check it out. /thread/117227 [original link is broken]
Hope this helps,
Nick He

How to list of Users who are using Crystal XI application?

Hi all,
Thanks for your support provided so far.
I need to get the list of users who are all using the Crystal XI application. I tried to get this info from the Business Objects Enterprise Applications in CMC but it was not there. Where can I find this information?
kindly help me.
Thanks,
Bhuvan R

There is not such a portlet available out of the box...
Have you looked at the code share section?
If you want to develop yourself, I don't think this is achievable using the IDK (remote interface)
But It is definitely possible to create such a portlet using the server API (drawback: the portlet has to live where a portal component is installed - WS, automation or Portal)

List of user who is going to get locked - OEM

Hi,
There there any way in OEM(Enterprise Manager Grid Control) to get the list of user who are going to get expired/locked in 5-6 days.
Can we set up such alert in OEM.
Thanks

Under the home page, under Related links at the bottom, I think you can follow the 'User-Defined Metrics' link.
This requires the Database Diagnostics pack, of which i do not have, so I cannot show example. More information on this link:
http://docs.oracle.com/cd/B16240_01/doc/em.102/e10954/udm2.htm
Edited by: mcarbon on 18-Apr-2013 08:27

List of users who have authorization for a particular transaction?

Hi All,
Can anyone guide me how to know the list of users who have authorization for a particular transaction?
I need this to find out the list of authorizations that are obsolete ,when the particular trnsaction is obsolete in an Upgrade process.
Thanks in advance.

we can get the list of users for a particular transaction as below.
get the tcode and place in AGR_TCODES and we get the list of roles .
loop the roles and pass each role to AGR_USERS and we get list of users for that role.
finally we got the list of users for that tcode.

How to get a list of user who is shared with particular workbook

Similar Messages

Maybe you are looking for