How to get accurate search?

When I search for ".net", nothing appears in any search results. There is one releated app = ".NET IQ C#". But why doesn't it appear at all? Shouldn't it be the first app? Why are all of these others unrelated apps appearing?
If I type in "c#", the app does appear but not until the 4th page. Shouldn't the above be the first app again?

Try putting quotes around the search term. Some characters such as dots have special meaning on computers and have to be handled specially in search engines.

Similar Messages

  • How to get the search option when we are creating new view

    Hi,
    How to get the search functionality when we are creating new view.
    Ex:- if we see the standard component BT112S_SC. Under this
    AdvancedSP  is the view,
    same kind of view if i want to create new view with same bol entity in my new component. I am unable to get that search functionality.
    for search functionality,,i think view should inherit the super class CL_BTSRV_ADVS_CNTRL, but in my new view controller class, i am unable to find this class.
    Can anybody give me some inputs on this.
    Thanks,
    neelam

    In case you are still not able to proceed please refer the following blog.
    http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view
    Regards,
    Harshit

  • How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

    How to get accurate photo printouts using  FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

    You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
    First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
    Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
    Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
    Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
    If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
    Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

  • How to get the Search Button from RichQuery Component

    Hello All,
    How can I get the Search Button from RichQuery Componennt, I could do not locate from getChildren, getFacets
    any ideas ?
    Thank you,

    Not even able to get it from getViewRoot findComponent("clientId");
    which is not good, RichQuery component can be inside popup and I do not want to add an extra button just to close the popup window
    Any ideas ?
    Thank you,

  • How to get accurate results of RGB adjustment layer Shadows in CMYK?

    Hi Guys,
    This is regarding RGB shadows to CMYK shadows. Most of the times we get the shadows from adjustment layers, when we converting to CMYK shadow as a separate layer it's really difficult to get the results as it in RGB. 
    In this process we won't get accurate results since we are creating manually. So I would like to know your opinions that how we can get the accurate results?
    You can see the following image.
    Regards
    HARI

    I really need to convert to CMYK since I use for packaging.
    Am I right to assume that you print in-house then?
    So might you not be able to obtain the correct profile for the respective press and just correct the RGB-file as necessary and separate a flattened file at the end?
    If you have to to maintain vector- and type-elements you could separate on pdf-creation and subsequently correct those vector elements in Illustrator (if necessary).
    Though I have to admit this would hardly be an ideal process as a converted psd-pdf can be a bit complicated.
    Another option might be to convert all pertinent elements to a Smart Object in RGB (including the background), keep the vector-/type-elements separate and convert that file to the proper CMYK-space without flattening the SO.
    Anyway, handling material from many different sources can of course be quite a challenge depending on the providing parties.

  • How to get (welcome) search page layout on publishing site

    hi friends
    i am working with publishing site
    i need to use (welcome page) search page layout but it is missing in 
    how to get it

    What is that error page there?
    Did you make any changes to default page. If yes try to revert it
    http://stackoverflow.com/questions/631113/page-layout-does-not-appear-in-the-page-layouts-list
    Did you have a look at the "Page layouts and site templates" page under Site Settings? On this page you can enable an option that limits the available page layouts to a specified list of page layouts.
    I have worked on a project where we needed to limit the page layouts available on a custom site definition. We implemented this in a feature, that enabled the "limited page layouts" option and populated the list of available page layouts upon activation.
    If this is the issue you are having you could simply turn off this option in the web interface or add the new page layouts manually, but you could also consider implementing a feature receiver that automatically adds your custom page layouts to the list
    of available layouts.
    http://www.myspblog.com/2011/04/page-layouts-missing-sharepoint.html
    If this helped you resolve your issue, please mark it Answered

  • How to get cm:search to use the max attribute when creating the SQL query?

    When we use the max attribute in the cm:search tag, it does not seem to honor the max attribute when creating the SQL query. However, the result returned from the tag is limited to the number specified by the max attribute. Then the tag seems to work as intended, but the performance will be sub optimal when the SQL query returns unnecessary rows to the application.
    We use the cm:search tag to list the latest news (ordered by date), and with the current implementation we have to expect a decrease in performance over time as more news is published. But we can’t live with that. We need to do the constraint in the SQL query, not in the application.
    The sortBy attribute of cm:search is translated to “order by” in the SQL query, as expected.
    Is it possible to get cm:search to generate the SQL query with an addition of “where rownum <= maxRows”?

    Hi Erik,
    The behavior of a repository in regards to the search tag's max results parameter is dependent on the underlying repository's implementation. That said, the OOTB repository in WLP does augment the generated SQL to limit the number of rows returned from the database. This is done in the parsing logic. This behavior may differ with other repository implementations.
    -Ryan

  • How to get the search function to find the correct files

    i have long wondered if it was me or the system, but i am very clear finally that the search function *****.
    1) i try to find a word in a document.
    2) the system shows me several possibilities. chapters 16, 18, 21, etc...
    3) i then bring up each one individually and search each one. some of them DON'T EVEN HAVE THE WORD OR PHRASE IN THEM THAT I AM SEARCHING FOR. what's THAT all about?
    4) so i look at my real life book or search on the web. voila! there it is. chapter 14.
    5) i try again. both finder search and spotlight. NEITHER SHOW ME THE CORRECT DOCUMENT. neither shows me chapter 14. they still show 16, 18, 21, etc.
    this has always been VERY mysterious.
    it has happened hundreds of times over the years.
    i am VERY clear now it is NOT me and it IS the system.
    what use is it to get a list of documents that do not have the correct criteria and NOT get the document that has the correct criteria?
    is leopard as sucky?

    thanks for your response.
    perhaps you don't use it as much as i do?
    i have been cursing this search feature for years.
    i often try to find exact words in a particular book
    that i have on my computer as .doc files.
    and it often does not find what i want and it often
    finds what i do not want. so i am very confused.
    i went to system preferences. opened spotlight.
    there is nothing listed under 'don't search here'...
    and i have only a few things listed under 'search here.
    i do not understand how that link could help my
    problem.
    when i search for the word inside a document or
    inside a pdf, the programs find the word. but
    finder/spotlight does not find it.
    i still need more help.
    and thanks for your response.

  • How to get the search criteria value in model

    Hi,
    I've a search page and one of the search item has BETWEEN operator. How can I get the values for this search criteria item in model project ie., inside the VOImpl.java?
    Thanks

    As you gave no jdev version and no use case all I can tell is to look at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/59-table-filter-by-data-range-176653.pdf which might help.
    What do you want to do with the parameter inside the VO?
    Depending on the use case and jdev version there are other possible solutions.
    Timo

  • How to get the search field with API UCM  for a specific UCM Profil

    We have UCM 10g
    For the checkIn we have for exemple the URL : http://xp-ucm1.oth.prs/idc/idcplg?IdcService=CHECKIN_NEW_FORM&dpTriggerValue=1&dpDisplayLabel=Codification%201&IsSoap=1
    To obtain all the field for the checkIn is very simple with this service(IdcService=CHECKIN_NEW_FORM) and RIDC, but for search we don't find the idc service ?
    <SOAP-ENV:Envelope>

    <SOAP-ENV:Body>

    <idc:service IdcService="CHECKIN_NEW_FORM">

    <idc:document dRevLabel="1" dUser="sysadmin" dDocName="" dDocTitle="">
    <idc:field name="xClbraUserList:isExcluded">1</idc:field>
    <idc:field name="xsgti_top_rule:isSetDefault">1</idc:field>
    <idc:field name="xlist1:isExcluded">1</idc:field>
    <idc:field name="xsgti_g_ll_niv1_1:isExcluded">1</idc:field>
    <idc:field name="xsgti_chrono_soc"/>
    <idc:field name="xsgti_g_entier4:isExcluded">1</idc:field>
    any ideas

    Hi,
    In fact, I don't want to send parameters to the search service but to get the fields to display an advanced search form of my own.
    Some rules and profiles filters the amount of fields availables and having a service that can do this filtering for me would be very useful.
    The check-in service do this for a trigger value (profile), but I can't find how UCM uses services to display the search form with the right fields depending on the rules and rights of the user.
    When I call a search form, UCM calls a service : http://xxx.xxx.xxx.xxx:xx/idc/idcplg?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=STANDARD_QUERY_PAGE&dpTriggerValue=xxx&dpDisplayLabel=xxx
    But with &IsSoap=1, the values returned are not good, some fields are missing, the field captions are not right... I guess UCM calls sub-services but which ones ?
    Thanks :)

  • How to get saved search name

    Hi
    I am in BT111S_OPPT.  i want to capture saved search name , how to do.
    please suggest.
    thanks
    ramakrishna

    Hi,
    You can get the saved searches from table CRMD_SHORTCUT.
    Regards,
    Masood Imrani S.

  • How to get webui search result only a group data?

    Dear Friends,
    In BP_HEAD we have enhanced with custom logic. we are registering group of customers under field bu_group in but000. component BP_HEAD_SEARCH we are getting all the data in BUT000. how to show only group data under field bu_group in search result.
    Thanks & Regards
    Deva

    Hello Thomas,
    I need to make data searched only created by the user. how to make BUT000-CRUSER default in background in Search.
    I have used the below  insert, but the search options are been effected which are in display,
    CALL METHOD Lv_QS->INSERT_SELECTION_PARAM
        EXPORTING
          IV_INDEX     = '1'
          IV_ATTR_NAME = 'CREATION_USER'
          IV_SIGN      = 'I'
          IV_OPTION    = 'EQ'
          IV_LOW       = sy-uname
    Thank and  Regards
    Deva

  • How to get old search box back

    Yesterday my broswer updated and I now have version 36. This comes with a new search box. I had several search engines listed with different languages, now all i see in this stupid new version is the same icon, I can't see the labels anymore which had DE / FR / EN in. They all look the same now.
    How do I go back to the old version? Who designed this? Some yank who can't speak any language other than english? I think I'll do what my colleagues have done and switch to chrome.
    and why does this site require so many stupid steps to ask a question, and when I create an account is thinks i may have meant .com instead of .de for my email address... what kind of crap is this? Does everyone at mozilla live in america and only speak english?

    Go to about:config and change '''browser.search.showOneOffButtons''' to '''false'''
    It's an option in the Advanced Section of the Classic Theme Restorer add-on. https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ if you want to check what other things with the UI you might want to undo.

  • How to get advanced search?

    How do I reach the advanced search for either iTunes music or the AppStore?

    In the iTunes Store, use the Power Search at the upper-right of the iTunes Store page, under the Quick Links. You can use that for both the iTunes Store and the App Store.

  • How to get accurate results from sql code ?

    Hello everybody,
    I have a problem with some portion of my code.
    I get more results than I specify in the where clause.
    Here is the sample code:
    c.gl_acct_id between '110'||'-'||'6890'||'-'||'69000'||'-'||'%'
    and '110'||'-'||'7000'||'-'||'67999'||'-'||'%'
    For some reason I also get the following results back:
    110-6910-51001-001, and 110-6910-51003-001 But I don't need the 51001 and 51003. How do I specify in sql what range I really want. I was sure that the code above is correct. I guess not.
    I would appreciate any help,
    Thanks,
    Sonya

    Have you tried using the query either of the following...
    1) c.gl_acct_id between '110-6890-69000-000'
    and '110-7000-67999-999'
    and c.gl_acct_id not like '110-6910-51001-%'
    and c.gl_acct_id not like '110-6910-51003-%'
    assuming you have only 3 digits at the end of gl_acct.
    2)If you know that your acct_id belongs to only 69000 or 67999
    then
    (c.gl_acct_id LIKE '110-6890-69000-%' OR
    c.gl_acct_id LIKE '110-7000-67999-%' )
    Plz. let me know if this not what you are looking for.
    thanx
    rajkiran
    Here is the whole script:
    select distinct c.gl_acct_id acct_no,
    c.gl_acct_desc,
    min(a.local_act_beg_bal) local_act_beg_bal,
    sum(b.local_act_mtd_dr_amt) debits,
    sum(b.local_act_mtd_cr_amt) credits,
    nvl(min(a.local_act_beg_bal),0)+sum(nvl(b.local_act_mtd_dr_amt,0))-
    sum(nvl(b.local_act_mtd_cr_amt,0)) end_bal
    from gl_acct c, gl_acct_bal a, gl_acct_bal b
    where c.org_unit_id = '110'
    and b.gl_acct_id = c.gl_acct_id
    and a.gl_acct_id = c.gl_acct_id
    and c.sum_det_ind = 'D'
    and c.gl_acct_class_ind in ( 'A' , 'L' , 'Q' , 'I' , 'E' )
    and a.year_no = '2001'--:loyear
    and a.period_no = '1'--:loperiod
    and ( ( b.year_no = '2001'--:hiyear
    and b.period_no between '1'--:loperiod
    and'13')-- :hiperiod
    and c.gl_acct_id between '110'||'-'||'6890'||'-'||'69000'||'-'||'%'
    and '110'||'-'||'7000'||'-'||'67999'||'-'||'%'
    group by c.gl_acct_id, c.gl_acct_desc
    I want to have ability to specify ranges for gl_accoount.
    Thanks,
    Sonya

Maybe you are looking for