How to get an error icon with tool tip in a displaying table   in a particu

How to get an error icon with tool tip in a displaying table   in a particular field..
Thanks.

Hi,
In the context  create an attribute of type string .
Create the attribute in the node which you bind for table.
In the layout .
1.create a Table UI element.
2 create binding for UI element.
3Right click on the Table UI and select insert table column.
4.once the table column is inserted right click on table column and select insert cell editor.
5.create the cell editor of the type image.
6.Bind the source property of the image to the attribute in the node which you have created.
so depending on what image(type of icon) needs to be displayed set the attibute accordingly.
refer to the link for image :
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d1/af8841349e1909e10000000a155106/frameset.htm]
Priya

Similar Messages

  • How to get the error message from a AWS code to display on the portal

    I implemented IAuthProvider, it works, within the code when authentication fails, I threw AccessDeniedException(customMessage) but when the login fails, the login screen always display the "You could not be logged in to the portal." error message, how can I get it to display the custom message? Am I throwing the wrong exception?
    TIA.

    Simpler? Uhm as far I know there doesn't exist any magic and you have just to write one or two lines of Javascript code yourself. Is that hard?

  • How to get the reporting icon  in cube.

    hi,
    i have a successful request(with all the required data) in the cube (manage screen) but i could n't get the reporting icon next to request id   in the cube manage screen how to get ithe reporting icon.

    This might be because of  issue -- data is not ready to view in the Query level. So that it happened.
    Go to the 'Manage' in the InfoCube level and verify the last updated request are ready to report.
    The possible causes may be
    1. If the previous request may be an error in Cube level, the other requests will not be ready to report.
    2. If there is Aggregate is maintaining in the Cube level, you should perform rollup to fill aggregates and made the requests available to report.
    Edited by: prashanthk on Aug 31, 2010 10:48 AM

  • How to get CS6 program icons to display?

    How to get CS6 program icons to display?

    This is the error message I get
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example, ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
    ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
    ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Antia\AppData\Local\Temp\{7976D5C1-6469-483B-B4CB-179D91E4C7E0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • How to get the Error message from hr_contact_rel_api.create_contact

    Hello All,
    I am using this API for creating a contact for an employee in R12.
    But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
    I dont find any out msg data variables for this API in order to check it for the Error.
    So, can any body help me how to get the ERROR Message for such APIs.
    Thanks inAdvance,
    Amarnadh Js

    user12243334 wrote:
    solved the issue on myselfIt would be nice if you could share the solution with us.
    Thanks,
    Hussein

  • HT204382 I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

    I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

    A warm welcome to Apple discussions!
    A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say  for your processor speed? What does it say about how much RAM you have?
    If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
    Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
    A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
    The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
    There are a few more things we might check but this is a good start.
    Awaiting your information,
    Allan

  • How the get rid of Lenovo ThinkVantage Tools

    Hi
    Has anybody an idea how to get rid of Lenovo ThinkVantage Tools in Windows 7? This stupid software doesn't have an uninstaller.
    I am really angry that Lenovo provides software in 2010 that can't be uninstalled cleanly from a system.
    Gerhard
    Solved!
    Go to Solution.

    Has anyone on Lenovo team knows how to properly uninstall "Lenovo ThinkVantage Tools"? I just received the NEW 2 desktop M91 series for our company to test wether it is suitable for us. But this annoying "thinkvantage tools" conflict with our System Centre Essentials and Symantec softwares. I had uninstall the tools in the control panel but still the application link still appear on the start up menu. If I right click the application link on the start up menu the properties of "lenovo ThinkVantage Tools" is listed below.
    C:\Windows\explorer.exe ::{26EE0668-A00A-44D7-9371-BEB064C98683}\2\::{A8A91A66-3A7D-4424-8D24-04E180695C7A}\Provider%5CMicrosoft.Base.DeviceDisplayObjects//DDO:%7B00000000-0000-0000-FFFF-FFFFFFFFFFFF%7D\cat{8AA6B0C2-14A6-4da8-BF36-F7D93ACE9ACE}
    I want this application completely remove from the system and NOT just on a single profile. I call Lenovo Support here in Australia and the Tech claims that there's NO TELEPHONE SUPPORT available for this product. I am VERY frustrated considering that I recommend this product to be rolled out here in our company but I guess I have to re-think that again considering the SUPPORT is VERY POOR.

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • How to get gui_download and gui_upload with popup filename?

    how to get gui_download and gui_upload with popup filename?

    Here is a short example.
    report zrich_0003 .
    data: ifiletab type filetable.
    data: xfiletab like line of ifiletab.
    data: xstring type string.
    data: rc type i.
    data: itab type table of string.
    data: xtab type string.
    start-of-selection.
      call method cl_gui_frontend_services=>file_open_dialog
        changing
          file_table              = ifiletab
          rc                      = rc.
      read table ifiletab into xfiletab index 1.
      xstring = xfiletab-filename.
      check not xstring is initial.
      call method cl_gui_frontend_services=>gui_upload
        exporting
          filename                = xstring
      changing
        data_tab                = itab.
      loop at itab into xtab.
        write:/ xtab.
      endloop.
    Regards,
    Rich Heilman

  • HT4236 I get an error message with I try to plug into itunes;  This iPhone cannot be used because the Apple Mobile Device service is not started.

    I get an error message with I try to plug into itunes;
    This iPhone cannot be used because the Apple Mobile Device service is not started.

    http://support.apple.com/kb/TS1567

  • I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly.  I have uninstalled/reinstalled evernote but it still doesn't work.  Anyone know where evernote stores their files on a Mac/

    I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it.  I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work.  Anyone know where evernote stores their files on a Mac?  Or had this problem.

    Are there any dialog boxes popping up behind your Yahoo screen?
    I have intermittent problems attaching files in Yahoo mail and this is usually the reason.  I'm also using an iMac (10.7.3) and this is likely the problem.
    It is generally a Yahoo issue rather than a Mac problem.

  • VERY FRUSTRATED!!!  Downloaded latest itunes on my PC, connected ipad 2, registered device.  It says follow onscreen instructions.  What instructions.  When I turn on my ipad I get an itunes icon with an arrow and a connector cord.  Can anyone help me???

    VERY FRUSTRATED!!!  Downloaded latest itunes on my PC, connected ipad 2, registered device.  It says follow onscreen instructions.  What instructions.  When I turn on my ipad I get an itunes icon with an arrow and a connector cord.  Can anyone help me???

    hi Yojoeyo,
    i have the same problem.  did you figure it out?  it looks like no one replied to your questions. 
    Derek

  • How to get the contents associated with a component.

    How to get the contents associated with a component.
    Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
    By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

    grab all the code inside the actionPerformed(ActionEvent e) method

  • How to get a minus sign with the cost  field in ALV.

    Hi ,
    How to get a minus sign with the cost field in ALV.
    The Ouput will be displayed like  Rs -1500 instead of 1500-
    I can't use concatenate also as i may have to use the sum functionality of ALV .
    Cheers
    Sunny

    Hi sunny,
    1. The OTHER FIELD
       has to be character field of say length 15.
    2. Write the original numeric value to
       this character field (in a loop)
    3. But simply writing won't help.
    4. use this kind of logic.
    5.
    REPORT abc.
    DATA : m TYPE i.
    DATA : chr(15) TYPE c.
    m = -100.
    WRITE m TO chr.
    IF m < 0.
      SHIFT chr RIGHT BY 1 PLACES.
      CONDENSE chr.
      CONCATENATE '-' chr INTO chr.
    ENDIF.
    WRITE chr.
    regards,
    amit m.

Maybe you are looking for