How to get an only audio line in working for HP ENVY 15?

So, I have have an HP ENVY 15 (product number E1P05AV), and am trying to record audio (from a synthesizer, mono audio out) into a third-party program (REAPER, though Audacity would work too). I am trying to accomplish this through an audio line in through the combined headphone/mic port on the right side of the computer. However, all attempts/experiments so far have resulted in the computer recording from the internal microphone- not desired. I've browsed the web a bit, but have found nothing really of help.
So, the question: how can I get the combined audio jack to work such that I can record audio from it, and not the internal microphone?

Supernova187,
I had the same problem with the HP "x2-k010nr". Bought the pc at OfficeMax/OfficeDepot and went to Radio Shack and bought the "adapter" since OfficeMax/OfficeDepot did not carry one. Spent days trying to figure out the same problem you are having. Sent to pc to HP and they returned it and indicated that they could not find any problem. Went back to OfficeMax/OfficeDepot and bought an Asus Transformer and it worked properly for two days and the same problem happened and had to return it. There appears to be a very serious problem with external audio-in on any Microsoft 8.1 os system and external audio . I have given up on Microsoft os products until this problem is solved. I have been using my Gateway netbook with XP os for 4 years with zero problems with external audio-in or out.
Ham123 Merry Christmas

Similar Messages

How to get waves maxx audio, dolby sound room for other toshiba laptops?

Hi, I have a A205-S5803 toshiba notebook that previously had vista , then xp, now windows 7 32 professional. I had a problem with xp where the sound volume was quite low even though turned up all the way. However, when I installed windows 7 professional and i think the realtek hd audio driver from toshiba the sound quality/volume greatly, greatly improved. I barely have the volume up below 50% and it is really loud. I even have some cool features-waves maxx audio and dolby sound room which greatly improve volume and sound quality.
I also have a nb305-410bn notebook which is running same windows 7 professional 32 bit but the sound quality is so low and the volume is low too even though settings are to the max. I installed the realtek official drivers which didn't help either. So I thought i would install the drivers from my other notebook since they helped improve the quality of that one. The sound did go up but I didn't get those features the wave and dolby. So I'm wondering has anybody any knowledge of how to enable install those features?

What to say dude. Seems to be something wrong with any system files or registry entries
Why you change something if you have no problems?!
Take my advice and never change a running system ;)
So now to your problem and some hints how to solve this stupid issue!
I would recommend restoring the OS to the early time point. Use the Microsoft tool called system restore.
Possibly you know this tool from the early MS XP OS.
You should find it somewhere in the Accessories.
If this procedure does not help you could use the Toshiba recovery CD and could install the whole OS again!!!
But before you will perform the installation from the recovery CD dont forget to backup your important data!!! ;)
Bye

How to get footer only in last page of report

anybody tell me
1).how to get footer only in last page while we are displaying reports
 and header only in first page .
2) how to create search help and how to use it .
3) how to create lock objects and how can we use it

Hi
This posting has an example of using a splitter container:
Changing width of a custom container dynamically
This posting has a discussion about using TOP-OF-PAGE:
Display Page numbers in ALV
This posting has an example of using picture control:
Insert picture in selection screen.
This posting has an example of putting a picture on top of an ALV grid:
Logo in OO ALV Grid
The page footer is defined using the statement END-OF-PAGE.
The processing block following END-OF-PAGE is processed only if you reserve lines for the footer in the LINE-COUNT option of the REPORT statement.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
Creating Search Help:
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_imp.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
A lock object is a virtual link of several SAP tables which is used to synchronize simultaneous access by two users to the same set of data ( SAP lock concept).
Locks are requested and released in the programming of online transactions by calling certain function modules which are automatically generated from the definition of the lock objects. These lock objects must be explicitly created in the ABAP Dictionary.
To set locks, you must perform the following steps:
1. You must define a lock object in the ABAP Dictionary. The name of the lock object should begin with E.
2. The function modules for requesting and releasing locks which are created automatically when the lock object is activated must be linked to the programming of the relevant online transactions.
Reasons for Setting Locks
Suppose a travel agent want to book a flight. The customer wants to fly to a particular city with a certain airline on a certain day. The booking must only be possible if there are still free places on the flight. To avoid the possibility of overbooking, the database entry corresponding to the flight must be locked against access from other transactions. This ensures that one user can find out the number of free places, make the booking, and change the number of free places without the data being changed in the meantime by another transaction.
Lock Mechanisms in the Database System
The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
SAP Locks
To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary. A lock object definition contains the database tables and their key fields on the basis of which you want to set a lock. When you create a lock object, the system automatically generates two function modules with the names ENQUEUE_<lock object name> and DEQUEUE_<lock object name> . You can then set and release SAP locks in your ABAP program by calling these function modules in a CALL FUNCTION statement.
Lock Types
There are two types of lock in the R/3 System:

Shared lock
Shared locks (or read locks) allow you to prevent data from being changed while you are reading it. They prevent other programs from setting an exclusive lock (write lock) to change the object. It does not, however, prevent other programs from setting further read locks.
Exclusive lock
Exclusive locks (or write locks) allow you to prevent data from being changed while you are changing it yourself. An exclusive lock, as its name suggests, locks an application object for exclusive use by the program that sets it. No other program can then set either a shared lock or an exclusive lock for the same application object.
example uses the lock object ESFLIGHT and its function modules ENQUEUE_ESFLIGHT and DEQUEUE_ESFLIGHT to lock and unlock the object.
For more information about creating lock objects and the corresponding function modules, refer to the Lock objects section of the ABAP Dictionary documentation.
The PAI processing for screen 100 in this transaction processes the user input and prepares for the requested action (Change or Display). If the user chooses Change, the program locks the relevant database object by calling the corresponding ENQUEUE function.
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
 WHEN 'SHOW'....
 WHEN 'CHNG'.
* <...Authority-check and other code...>
 CALL FUNCTION 'ENQUEUE_ESFLIGHT'
EXPORTING
MANDT = SY-MANDT
CARRID = SPFLI-CARRID
CONNID = SPFLI-CONNID
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID
TYPE 'E'
NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
The ENQUEUE function module can trigger the following exceptions:
FOREIGN_LOCK determines whether a conflicting lock already exists. The system variable SY-MSGV1 contains the name of the user that owns the lock.
The SYSTEM_FAILURE exception is triggered if the enqueue server is unable to set the lock for technical reasons.
At the end of a transaction, the locks are released automatically. However, there are exceptions if you have called update routines within the transaction. You can release a lock explicitly by calling the corresponding DEQUEUE module. As the programmer, you must decide for yourself the point at which it makes most sense to release the locks (for example, to make the data available to other transactions).
If you need to use the DEQUEUE function module call several times in a program, it makes good sense to write it in a subroutine, which you then call as required.
The subroutine UNLOCK_FLIGHT calls the DEQUEUE function module for the lock object ESFLIGHT:
FORM UNLOCK_FLIGHT.
 CALL FUNCTION 'DEQUEUE_ESFLIGHT'
 EXPORTING
 MANDT = SY-MANDT
 CARRID = SPFLI-CARRID
 CONNID = SPFLI-CONNID
 EXCEPTIONS
 OTHERS = 1.
 SET SCREEN 100.
ENDFORM.
You might use this for the BACK and EXIT functions in a PAI module for screen 200 in this example transaction. In the program, the system checks whether the user leaves the screen without having saved his or her changes. If so, the PROMPT_AND_SAVE routine sends a reminder, and gives the user the opportunity to save the changes. The flight can be unlocked by calling the UNLOCK_FLIGHT subroutine.
MODULE USER_COMMAND_0200 INPUT.
CASE OK_CODE.
 WHEN 'SAVE'....
 WHEN 'EXIT'.
 CLEAR OK_CODE.
 IF OLD_SPFLI NE SPFLI.
 PERFORM PROMPT_AND_SAVE.
 ENDIF.
 PERFORM UNLOCK_FLIGHT.
 LEAVE TO SCREEN 0.
 WHEN 'BACK'....

Another Example :
please see this link with Screen shot .....
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/frameset.htm
Reward all helpfull answers
Regards
Pavan

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to get the only the changed or newly added entries in AFTER SAVE.

I have created table maintenance generated for a table,I want to get the newly added or changed entries while saving thats why im using AFTER SAVE event for the same,can anyone please tell me how to get the only the changed or newly added entries in AFTER SAVE.

Hi,
Welcome you post on the forum.
I have moved your thread here because it is in English and should not in the language specific forum. What is your system version?
Thanks,
Gordon

How to get string (specified by line and column) from txt file with labview

Hi everyone
How to get string (specified by line and column) from txt file with labview
thx
Solved!
Go to Solution.

As far as I know, a text file has no columns. Please be more specific. Do you mean something like the 5th word on line 4, where words are separated by a space, and lines are separated by a newline character? You could the Read from Spreadsheet String function and set the delimiter to a space. This will produce a 2D array of strings. Then use index array and give the line number and column number.
- tbob
Inventor of the WORM Global

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

How to get a wallet (like in Nokia 6600) for Nokia...

Dear All,
Can you please tell me how to get a wallet (like in Nokia 6600) for my Nokia E63?
Narottam Das
Kolkata, India

Using the data from your Excel spreadsheet, this is what I get from the curve-fit functions:
Seems like a pretty-good fit to me. I'm not sure what you're trying to do with the polynomial evaluation stuff, though.
Message Edited by smercurio_fc on 07-30-2008 09:21 AM
Attachments:
Example_VI.png ‏17 KB

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer

HT5622 I reset my ID and password for my Mac. How do I get that ID and password to work for my iPhone?

I reset my ID and password for my Mac. How do I get that ID and password to work for my iPhone? My account is disabled on the iPhone until I have the ID and password synched for both devices.

You cannot merge iCloud/Apple IDs. You must decide which one ot use, one or the other. Login with your new ID on your computer.
Be aware that content/apps purchased with the old ID will be forever tied to that ID.

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help.

Anyone.know.how.to.get.spacebar.and.delete.button.to.work??

anyone.know.how.to.get.spacebar.and.delete.button.to.work??

I think you are asking this in the wrong forum. This is for TBD issues.

Anyone know how to get harman kardon soundsticks II to work on new iMac Mavericks

Anyone know how to get harman kardon soundsticks II to work on new iMac Mavericks??

I'm using the original HK Soundsticks on a 2013 MacBook Air running Mavericks.
Don't they show up in the Sound Preferences? Are they plugged directly into your iMac?
Little more info would help.

How to get an only audio line in working for HP ENVY 15?

Similar Messages

Maybe you are looking for