How to get BP kind based on user name?
Hi,
How to get BP kind based on user name?
Is there any table other than BUT000 which gives the Business partner no. and BP KIND?
What is BLUEPRINT table?
Hi John,
do you mean Type:
1 Person
2 Organisation
3 Group
or Role like
000000 Business Partner (General)
BBP000 Vendor
BBP001 Bidder
BBP002 Portal Provider
BBP003 Plant
BBP004 Purchasing Company
BEA001 Billing Unit
BUP001 Contact Person
BUP002 Prospect
BUP003 Employee
BUP004 Organizational Unit
BUP005 Internet User
The Role can be found in BUT100.
Regards
Gregor
Similar Messages
-
How to get Current Log in BO user name in data access driver
In universe, to get the current log in user is via @Variable('BOUSER').
Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?Shweta,
The link you provided was the Auditor guide for BO 6.x, I'm not sure it that is going to help Karen or not.
Karen,
There is function called connection
(usage: =connection([Query Name]), where [Query Name]
denotes the name of the tab for the query under Edit Query)
Here is some of the output from connection:
4;ODBC18;MS SQL Server 2000166; VERSION=7; USER=xxxxx;
PASSWORD=; DBTYPE=Relational; DATABASE=xxx_xxxx;
ODBC_USER=xxxxxx; ODBC_PASSWORD=; BO_DSN=xxxx_xxxx;
BO_DRV_CONNECT_MODE=0; 224; VERSION=6; Name=xxxxx; Shared=4;
LoginTimeout=600; Timeout=600; Pool Time=60; Array Fetch Size=10;
Array Bind Size=5; RecommendedLenTransfert=1000; Password_Encryption=x;
AliasTable=; MeasureDimension=; Hint=; ConnectInit=; ArrayFetch=1;
I'm not sure if this info helps out either, being that connection provides info on a post-processing basis and it sounds like you need to get out ahead of the SQL generation. The @variable('bouser') would seem like the place to be, however, in allowing custom SQL to take place you loose the bouser due to an individual could customize the SQL to the point that it gets unwantingly yanked out. The end_sql might be your answer...
Thanks,
John -
How to get record created and modified user name from SharePoint Database?
Hi,
My SharePoint Portal is in Window Authentication. Some users have added requests to Lists. I want to find user name of the Created By and Modified By.
Only ID is available in the corresponding columns in Content Database table. In which table the users details would store in Content Database.
Thanks & Regards
Poomani Sankaranhi, you can find the user details inside UserInfo Table in content database. But i would suggest not to directly query the content databse not even for select as it will affect the indexes.
why not follow the link
http://www.sharepoint4arabs.com/AymanElHattab/Lists/Posts/Post.aspx?ID=99
also if you just need the basic created by and modified by info than use SharePoint Object Model To get these values using ECMA script use below link
http://www.c-sharpcorner.com/UploadFile/anavijai/get-created-by-and-modified-by-values-from-sharepoint-2010-l/ using Client side object model https://msdn.microsoft.com/en-us/library/office/ee534956%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Using server Side Object model
http://www.sharepointcto.com/View.aspx?id=15
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer -
am trying to print usps labels but Firefox won't open the relevant web page
thank you
bil mciver
[email protected]Details like websites remembering you (log you in automatically) are stored in a cookie.
*Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
*Tools > Options > Privacy > "Use custom settings for history" > Cookies: Exceptions
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep. -
How to get a formula from the user from a text box in a webpage
Hi. I would like to know how to get the formula from the user who enters in a textbox. This formula can have any number of variables starting with a and goes on.
The complexity of the formula can go upto sin, cos, ln, exp. Also user enters the minimum and maximum values of these variables. Based on a specific algorithm (which I use) I would calculate a *set of values, say 10, for each of these variables, substitute in the formula and based on the result of this formula, I select ONE suitable value for each of the variables.
I don't know how to get this formula (which most likely to be different each time) and substitute the values *which I found earlier.
Kindly help me out in this issue.
ThanksThe textbox is the easy part. It's no different than getting a String parameter out of an HTTP request.
The hard part is parsing the String into a "formula" for evaluation. You'll have to write a parser or find one.
Google for "Java math expression parser" and see what you get.
Or write your own with JavaCC.
% -
How to determine Organizational Data based on User Login
Dear all,
How to determine organizational data based on user login in Activity transaction, currently org determination is happening after entering customer number in the transaction.
We have used 'Responsibility' determination rule for this configuration. Now the requirement is to determine org data based on user login.
In Org model we have assigned user to org data through a business partner. But still org data is not getting determined in the transaction.
Please help me to trace out the problem.. your suggestions will be highly appreciated.
Best regards
Raghu ramYou just have to use other organization determination rule. In your case this would be rule 10000194 (ORGMAN_12). This determination rule delivers the responsible organizational unit of the user
User is defined as a business partner in the container attribute 'PARTNER'. If not, the system user (sy-uname) is used.
So you have to do the following:
- use this determination rule
- in BP link username with employee
- assign in PPOMA_CRM employee or user to organizational unit
This should solve your problem. -
How to get status profile (STSMA) in user exit ILOM0001
Hi ABAPers,
I am currently working on user exit ILOM0001 (Check before saving a functional location) and need to get information about status profile (STSMA). I have checked parameters that is imported into this user exit (DATA_IFLO, DATA_IFLO_OLD, DATA_IFLOS) and none of them have STSMA.
Could anybody help me how to get this field STSMA into user exit ILOM0001?
Appreciate it.
Thanks
Regards
HadiDear Kolla,
Really appreciate your answer, but
I don't want to generate or make settlement receiver.
I was building a script in user exit IW010009,
And the issue is I can not capture the content of field settlement receiver.
If we want to capture screen field, ex. equnr, we can use structure CAUFVD,
when i see the technical detail in this field, the structure for settlement is DKOBR, field EMPGE, but i cannot call it on debug.
Kindly need your help on this issue. -
I have two user names with Administrator privelages and my MacBook keeps booting up to the wrong one and I have the wrong configuration since I updated to OSX 10.9. I would like to get back to my original User name which I used to boot up to. When I go to the User Groups and Preferences it doesn't allow me to delete the un-wanted user.
Does anybody have any suggestions how I can fix this? I can't seem to recover Time Capsule back-ups prior to the OSX upgrade even though I have been faithfully backing up to a Time Machine.
Help please.First of all, open System Preferences > Users & Groups > Login Options, and set your old user account in "Automatic login". By doing this, your computer will always log in with your old account.
Then, log in your old account, where you will be able to delete the new user that OS X Mavericks forced you to create. Other users have reported the same problem -
How to add column dynamically based on user input in oracle?
**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);
-
How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?
Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
currently I am trying to verify how many users Lines are missing , Emp numbers , Phones from AD with HR list available to me.
I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
any’twhenCreatedtAcctEnabled’tGroups
Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
Can you modify this script to help me out :)
Hi,
Depending on what attributes you want.
Import-Module ActiveDirectory
#From a txt file
$USERS = Get-Content C:\Temp\USER-LIST.txt
$USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
#or from a csv file
$USERS = Import-CSV C:\Temp\USER-LIST.csv
$USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
Regards,
Dear
Gautam Ji<abbr class="affil"></abbr>
Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
| Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk -
How to get the groups info for user
Hi guys i am new to ALUI..
i am trying to do some enhancement.
i want to know how to get the information of the users group and the group details using the IDK API?
Can sombody share some code?Hello,
You are welcome. Here is one way of get what you want:
1) get all groups id's
IPortletContext - >IRemoteSession -> IUserManager - > getCurrentUserGroups() -> int []
2) get details about group
IRemoteSession.getObjectManager(ObjectClass.UserGroup ) ->
cycle over int []: {
IObjectManager -> querySingleObject(comminity id) -> IObjectQueryRow -> getName()
Because you are going to use PRC and make SOAP calls to portal don't forget setup WS to pass token to portlet (check WS settings)
Edited by Bryazgin at 05/29/2008 7:48 PM -
How do I get Skype to remember my user name on my ...
How do I get Skype to remember my user name on my Vizio TV? I have to re-enter it every time I turn on the TV.
And what does the Sign in Automatically option do? It doesn't seem to do anything?i have also the same problem
-
How to get fiscal period based on date and Fiscal year?
Hi Guys,
Can anybody tell me how to get Fiscal period based on date and Fiscal Year or fiscal year variant?
Thanks,
Gopi.Hi,
Please refer the code below:
*: Report: ZFISCALYR :
*: Date : 2004 :
*: Description: Demonstrates how to return the corresponding fiscal :
*: year and posting period for a company code and posting :
*: date or posting date and fiscal year variant. :
REPORT zfiscalyr NO STANDARD PAGE HEADING.
TABLES: ekko.
PARAMETERS: p_bukrs TYPE ekko-bukrs,
p_bedat TYPE ekko-bedat.
DATA: gd_fiscalyr TYPE bapi0002_4-fiscal_year,
gd_fiscalp TYPE bapi0002_4-fiscal_period.
DATA: gd_fiscalyr2 TYPE T009B-BDATJ,
gd_fiscalp2 TYPE bapi0002_4-fiscal_period.
DATA: gd_periv TYPE t009-periv.
*START-OF-SELECTION.
START-OF-SELECTION.
* get fiscal year and period - (requires date and company code)
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
companycodeid = p_bukrs
posting_date = p_bedat
IMPORTING
fiscal_year = gd_fiscalyr
fiscal_period = gd_fiscalp.
* Alternative fiscal year function module
* - (requires date and fiscal year variant code from T009 table)
* gets first entry in fiscal year variant table (will need to choose
* correct one from table rather than just using first entry)
SELECT SINGLE periv
FROM t009
INTO gd_periv.
* get fiscal year and period
CALL FUNCTION 'DETERMINE_PERIOD'
EXPORTING
date = p_bedat
* PERIOD_IN = '000'
version = gd_periv
IMPORTING
period = gd_fiscalp2
year = gd_fiscalyr2
EXCEPTIONS
period_in_not_valid = 1
period_not_assigned = 2
version_undefined = 3
OTHERS = 4.
*END-OF-SELECTION.
END-OF-SELECTION.
WRITE:/ 'From function module: BAPI_COMPANYCODE_GET_PERIOD',
/ 'Fiscal year is:', gd_fiscalyr,
/ 'Fiscal period is:', gd_fiscalp.
SKIP.
WRITE:/ 'From function module: DETERMINE_PERIOD',
/ 'Fiscal year is:', gd_fiscalyr2,
/ 'Fiscal period is:', gd_fiscalp2.
Thanks,
Sriram Ponna.
Edited by: Sriram Ponna on Apr 17, 2008 8:59 PM -
How to get this kind number?
I have a float number,e.g myfloat=123.34???. When the first "?">=5,
myfloat=123.35,or myfloat=123.34.Can anyone tell me how to get this kind number.
Thanks in advance.In fact, not very clear of your problem.
Supposing you want to get fix position's value after ".",
you could firsly convert it to a string,
then position "." ,use subString() to get the value.
compare it, reconvert it back. -
How to get BP number having SAP User ID .?
HI all,
How to get BP number of a user having his SAP User ID .?
Help reg this.hi check this...
In SUS Link between registered User ID and Business Partner (Vendor) Number
Assign User to Business Partner
regards,
venkat .
Maybe you are looking for
-
Payment block by default un Residual items documents
Hi I was wondering why SAP is setting a payment block by default when creating a "Residual item" document. Does anybody knows where is configured this behavior? thanks a lot Rafa
-
ServerSideSync: track outgoing e-mails
Our customer wants to have the e-mails of thier sales to be tracked automatically. No matter if the e-mails are sent via outlook, tablet or mobile. They can't install CRM Outlook client. ServerSideSync works perfectly for this scenario for incoming e
-
Dotted line not working on stroke with a 0pt dash
I'm having a problem created a dotted line in Illustrator CS5 using the technique of selecting a dashed stroke and setting the dash length to 0pt. Instead of dots, I'm getting dashes with rounded ends as shown in the image below. I'm sure I'm missing
-
I downloaded an album from i tunes, but it will not play back correctly, it starts a track and then stops randomly and jumps to the next track and then does the same thing ad ainfinitum! What to do??
-
Change job owner for job owned by a report server process
Question on a SQL 2008 Enterprise Edition (64-bit) I have changed the owner of a couple of jobs (owned by a report server process) using Management Studio. The new user has sysadmin role just like the previous one had. Then I kept thinking on the job