How to get cost at wbs level
hai gurus can any one tell is there any one tell is there any funciton module to get the cost at wbs level or any other method
thanx in advacne
azfal
Hi
Use the table <b>BPEJ</b> to Get the Full Year budget costs of all WBS elements
and actual costs by using the fun module
<b>K_CO_OBJECT_BALANCE_GET</b>
<b>Reward points for useful Answers</b>
Regards
Anji
Similar Messages
-
How to get costing BOM from R/3
Hi friends,
How to get costing BOM from r/3 with levels into bw.and the transaction in r/3 is ck13nHi,
You'll need to go in for a generic DS in this case.
Cheers,
Kedar -
Reg: Capturing Cost at WBS Level
Hi
I have create two activities(one internal and other External) under one WBS Element.
I have complete the process of confirmation(for Internal activity) and Purchase process for external activity.
Now i can see both the planned and actual costs of those activities.
Now i want the see the costs at WBS Level, which is now happening.
pl guide me, where i can see and what will be the process.
Thanks & regards
pavanHi Pawan !
You can see all the Reports in project system under-
Logistic->Project System->Information System->Financial->Varius reports are given there
you can use Report-
S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned
Thanks
Rewards Point if helpful
Regards
Smith -
How to get the last wbs which is displayed in transaction code cj03?
Dear Experts,
I want to get the last wbs which are displayed in transaction code cj03, i have written below program,but i found it is incorrect. because the sort of wbs in cj03 is not equal to table prps. the last wbs in cj03 is not equal to table prps.
who can tell me how to get last wbs which is displayed in cj03?
SELECT
PRPS~STUFE
PRPS~POSID
PROJ~POST1
INTO CORRESPONDING FIELDS OF TABLE WA_PRPS_TEMP FROM PRPS INNER JOIN PROJ ON PROJPSPNR = PRPSPSPHI
WHERE PROJ~PSPID EQ P_PROJECT.
WA_TLINE = LINES( WA_PRPS_TEMP ).
READ TABLE WA_PRPS_TEMP INDEX WA_TLINE.
IF WA_PRPS_TEMP-POSID = P_lastWBS.
P_LAST = 1
endif.
Best Regards,
MerryHi Merry ,
The WBS elements are stored in the table PRPS , so please try using the conversion exit and use the data in internal format then use it in the IF condition.
Check the FM CONVERSION_EXIT_ABPSN_INPUT and CONVERSION_EXIT_ABPSN_OUTPUT
Regards,
Arun -
How to get Cost element for a component in co03 cost analysis report
Hi,
I'm using table COSP to find the quantity for a production order component. However, I need to identify the cost element first to get the unique data. In CO03 cost analysis report, there is cost element for the component. Does anyone know how to get it ?
Thanks.CSKA stores the basic info about the cost element
There is no data in CSKB.
I'm trying to use different tables to get the cost element.
AUFK, AFKO, AFPO, RESB, ...but no luck... -
How to get the initdefault run level in Solaris 10
Hi All,
In Solaris 9 and below
I will get the init run-level by checking the /etc/inittab entry
is:3:initdefault:
But in Solaris 10 we are using the smf functionality.
Here how I can get the init default run level.
Please help me in this problem.
Regards,
KalaiInit levels no longer form a 1:1 mapping with how SMF will run things.
The default milestone is 'all'. You can override this on the boot line. I'm not sure how you might change it within the filesystem.
Darren -
How to get cost plan value in tcode 'CJ40'
Hi guys,
Run tcode 'CJ40', user can input the cost in WBS element (in the 'cost plan' column).
Now the requirement is that , we should get the value from this column and I have find some functions. But all don't work.
So seek help from you experts.
Welcome any suggestion!.
Thanks very much!!Refer COSS, COEP and COSP tables for actual and plan costs.
Thanks,
Santosh -
How to get only the first level of nodes for a subform?
How can we get only the first level of nodes of a subform?
For ex:
Form1
SubForm1
Text1
Text2
RadioButton1
SubForm2
Text1
Text2
RadioButton1
SubForm3
Text1
Text2
SubForm31
RadioButton1
In this heirarchy if we give Form1.nodes will refer to all nodes under the Form1 (SubForm1,Test1,Text2,RadioButton1,SubForm2,...SubForm31, RadioButton1 etc..)
But is there any way that we can access only the first level of nodes of Form1 ie can we get only (SubForm1,SubForm2,SubForm3) for Form1 in any Way..?
Thanks.Two ways .....
1. Use Javascript E4X instead ...there are nice functions for getting children of parents.
2. Cycle through all of the form1.nodes and look for objects that have a className of "subform". For loops are useful for this task.
Make sense?
Paul -
How to get cost center group from cost center
Hello
I have cost center and i need to get the cost center group.
Anyone having an idea how to get it???
Thanks
ParvezHi,
Cost centre could be assigned to different cost centre groups. For standard hierarchy, you can retrieve it from CSKS table, but for other groups SETLEAF table (class 0101) will provide you a complete answer.
Regards,
Eli -
How to get rid of high level hiss/whine in interview
I am recording oral histories and interviews for my graduate research. I am using Garageband 2, an iMic, and an omnidirectional mic from Radio Shack. The gentlemen I am working with are in their late 80s and early 90s, so these are softer voices, generally accented, and the recordings are done in a living room or on a kitchen table.
My problem is that my recordings all have a high pitched whine/hiss when I play them back, making it difficult and downright annoying to listen to them. I have made sure that the imic input is selected in both system preferences and the garage band preferences. I've also switched to recording the vocal real instrument (only using AULOWPASS, all other effects turned off) in mono rather than stereo to see if that would help (it fixed the other problem I had of my ibook pulling sounds from both the on-board mic and the external mic).
So, what is this high-pitched whine and how do I get it to stop? Is it a mic problem, or is Garageband picking up other sounds I normally don't hear? If so, how do I adjust my levels? Generally it's bad to listen to in Garageband, and even worse when converted to mp3. At times, it almost entirely drowns out my subjects. I make sure the input on the main sys prefs-sound is almost all the way up, or else I tend to have problems hearing the men I'm recording - for another reason the input volume in the track info is always greyed out and set at the lowest level. It's not feedback as far as I can tell, and I'm sure to have the monitor off and mute my output speakers when recording.
I appreciate any help from anyone who has either had and fixed this problem, or any other suggestions.I am using [...] an iMic, and an omnidirectional mic from Radio Shack.
Not the greatest combination, low cost equipment often gets mediocre results I'm afraid B-(>
Additionally an omnidirectional mic is going to pick up every noise everywhere in the environment.
My problem is that my recordings all have a high
pitched whine/hiss when I play them back,
You can try fiddling with the standard EQ, GraphicEQ, ParametricEQ, and the various shelf filters, but it's tough to make a recording of questionable integrity sound good.
recording in mono rather than stereo
You have to record in mono, you're only using a single mic.
(it fixed the other problem I had of my ibook pulling sounds from both
the on-board mic and the external mic).
That is not physically possible on a Mac, it's one or the other, but not both unless you specifically create an Aggregate device to use both.
So, what is this high-pitched whine and how do I get
it to stop?
You're not going to like this, but, better equipment.
Is it a mic problem,
Likely part of it.
or is Garageband picking up other sounds I normally don't hear?
You mean "or is the Mic picking up sounds I don't usually hear", and yes, that's possible as well. We get very used to sounds we hear all the time, so much so that we cease to hear them.
another reason the input volume in
the track info is always greyed out and set at the
lowest level.
http://www.thehangtime.com/gb/gbfaq2.html#volumesliderdimmed -
How to get Cost centers a below a cost center from hierarchy using ABAP
Hi !!
I am currently developing a user application wherin i need to give a dropdown help to the users for cost center field.
How ever I need to give him those cost centers in the help which are lower to the cost center to which he is assigned .
For example he is at department level which has cost center '90000' he should get the cost centers of the offices assigned to that department in the hierarchy .Also cost centers of various lower nodes which might have been assigned to these offices and so on so forth .
How can I get those cost centers which lie lower to a particular cost center in the hierarrchy using ABAP ..as I am in to BSP application and have access using ABAP.
thanks in advanceBSPIAN,
usually there will be a hierarchy table where the cost center hierarchy is stored. see if you can find that table.
To go about the same , activate the datasource for cost center hierarchy from business content
Execute the datasource in RSA3
do a background SQL trace and you will find the necessary table for the same.
Hope it helps..
Arun
Assign points if helpful -
How to get the Minum Grade level from the view cluster table V_T710CL_B
Hi Guys,
I want to fetch the Minum Grade level from the view cluster table V_T710CL_B
kindly help me
Regards
Rusidar.HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
How to get Cost Center number from a Customer
Hi Sap Experts,
I have a customer number from xd03. But I would like to know which is the cost center used by this customer, how can I find that?
Because I'm getting an warning message when using FB08, it points to the Tax Jurisdiction issue. I believe at some point, it's checking the Jurisdiction field of the cost center.
Regards,
CHLHi,
Thank you for the reply.
The thing is, when I run FB08 for a specific document, i'm getting this warning Msg: Account assignment object has jurisdiction code XX, line iten XX AAAAAA.
I checked already the configurations for jurisdiction code in customer master data and the path "define tax jurisdiction code" with spro.
I noticed something, during the debug at some point its reading the cost center's jurisdiction number, and will compare it with customer's master data jurisdiction.
But if there's no cost center it will process fine.
It's in the program SAPLKAIP, form CostCenter_Check. Not sure if it's SAP standard code.
Cheers.
CHL -
How to get the multidementional hierarchy level number ?
Dear all,
Could anyone tell me how to receive the hierarchy level number like the picture below:
[click here for the Screenshot|http://yaoxin.de/download/level.jpg]
as you can see, when i mouse hove on a level, it shows the level number.
but, I want to get the level number 2 (node number 2) in query designer, but i can't find anywhere to show that.
thank you for your kind help !
Edited by: Xin Yao on Aug 26, 2011 1:04 PMhi Charlie Belt,
Thank you very much for your answer.
And yes, I do wish to perform a calculation based (aggregation) on the hierarchy level.
How can I continue working on that?
yao
wish you have a nice weekend! -
Hi all,
This is the code, to get the label of every one parent level nodes, when we open the parent node item in AdvancedDataGrid in Flex.
<?xml version="1.0"?><!-- dpcontrols/adg/SimpleGroupADGMXML.mxml --><mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.AdvancedDataGridEvent;
import mx.collections.ArrayCollection; [
Bindable]
private var groupData:ArrayCollection = new ArrayCollection([{Computer:
"HardWare Devices", Device:"Keyboard", Company:
"Logitech", PriceInRupees:"500"}, {Computer:
"HardWare Devices", Device:"Keyboard", Company:
"Microsoft", PriceInRupees:"500"},{Computer:
"HardWare Devices", Device:"Mouse", Company:
"Logitech", PriceInRupees:"300"},{Computer:
"HardWare Devices", Device:"Mouse", Company:
"Microsoft", PriceInRupees:"300"},{Computer:
"HardWare Devices", Device:"Monitor", Company:
"LG", PriceInRupees:"5000"},{Computer:
"HardWare Devices", Device:"Monitor", Company:
"Microsoft", PriceInRupees:"5000"}]);
//This method is used to get label of every parent lavel nodes, when we open any item
private function getLabel(e:AdvancedDataGridEvent):void{
Alert.show(e.item[
"GroupLabel"]);}
]]>
</mx:Script>
<mx:Label text="NOTE : Open the every parent level nodes here. We can get the label of every one parent level nodes."color="
blue" fontWeight="bold"/>
<mx:AdvancedDataGrid id="groupADG" width="
100%" height="437" initialize="gc.refresh();" itemOpen="getLabel(event)"
>
<mx:dataProvider>
<mx:GroupingCollection id="gc" source="{groupData}">
<mx:grouping>
<mx:Grouping>
<mx:GroupingField name="Computer"/>
<mx:GroupingField name="Device"/>
</mx:Grouping>
</mx:grouping>
</mx:GroupingCollection>
</mx:dataProvider>
<mx:columns>
<mx:AdvancedDataGridColumn headerText="
Computer"/>
<mx:AdvancedDataGridColumn dataField="Company"headerText="
Company"/>
<mx:AdvancedDataGridColumn dataField="PriceInRupees" headerText="PriceInRupees"/>
</mx:columns>
</mx:AdvancedDataGrid>Dialog\ResponseTime 6585
"The dialog response time consists of the period of time from the request of the dialog to the dispatcher through the processing, to the ending of the dialog in the dispatcher and the transfer of the data to the presentation layer"
This is not buffered as far as I know is measured on demand
Read,
http://help.sap.com/saphelp_nw70/helpdata/en/31/d7843b43c8e937e10000000a11402f/content.htm
Regards
Juan
Maybe you are looking for
-
Acrobat Pro 9.5.2 locking up
On a mac running OS 10.6.8 my Acrobat Pro 9.5.2 locks up with a transparent gray box. The only way out is to Force Quit the program. I also have Acrobat 7 loaded (but not running) as this version of Acrobat works. Do I need to deinstall both and rein
-
Will this damage my ipad?
-
How much Number of virtual processors for VMs
Hi, there is lots more information about logical processors, cores and CPU and their definitions, on the internet. also here in this forum. In order to make sure i am not lost on internet, it is better to take experts advice like you. I have simple q
-
Reference field in BAPI_INCOMINGINVOICE_PARK
Hi Friends, I tried to create Invoice docuemnt park for FI entries & used . In this I couldn't able to get the field where I can enter refence (vendor invoice reference) i.e. RBKP - XBLNR field. Regards Sai Krishna
-
dear all, i have mention serial number for a pump say ACSGETE12344 . at migo gr level. i also issue the material with same serial number. now this information and serial number against material in which table i will get ? please help