How to get date appended in the filename of the IR reports

I have a requirement where in i need to generate the output for the IR reports with a date appended in the output name.
The report is scheduled daily. The generated output should have a date appended to it.
For example - if the report say 'abc' gets generated today then the name of the generated report should be abc_26/10/2009.
I could find one option saying append date to the filename while adding a schedule to the report. I have checked that property but still while generating the report i am not able to see the date appended with the report name. It just takes the cycle name that i had mentioned.
I am using IR 11.1.
Any help is appreciated.

Do to the complexity of the program we need to run it with sequences. This is because we need to aquire data with DAQ until it reaches a certain point and then stop collecting so that it can do its process (only once for all times criteria is met), and then loop around till again collecting after DAQ drops back below certain point looking to once again reach that point. Another flat sequence is going outside of this where I want to put the prompt and have a user input to affect how many times that that the inner loop is run (No a For Loop instead of the while loop will not work either for other reasons).
I just want to know if after the program starts you can have a user input that will change the effect of the rest of the programs action based on the number inputed.

Similar Messages

PDF: How to get date/time into the heading of a FOP/PDF file?

Hi!
What changes do I need to make to the PDF report template or what else can I put in the heading block of the "Print" page so that it will include the date and time the PDF was generated?
Also how would I add this so that it prints on the bottom of the page like the page number?
Thanks in advance for any tips, tricks, ideas, examples, etc.!
Dave Venus

Hi!
Perhaps I missed this some place but you can get the value of a page item or application item into the header or footer of a (FOP) PDF report by using a "&<item>." format substitution string. For example I have a 1 time application process that puts todays date in an application item named F106_SYSDATE (F106_ is the application id). Then in my headers I use:
XXXX Report on: &F106_SYSDATE.
Simple. Works great! And better yet my users are a little happier! :)
Thank for everyone's help and suggestions!
Dave Venus

How to get "Date" alone from the built-in field "ExecutionTime"

Hi,
I am new to SSRS. In my report, under the report heading, I want to show just the Execution date (for example "06/15/2010" if I run the report today).
I dont know how to format the "ExecutionTime" built-in field? Please help me..

Hi,
I am new to SSRS. In my report, under the report heading, I want to show just the Execution date (for example "06/15/2010" if I run the report today).
I dont know how to format the "ExecutionTime" built-in field? Please help me..
You will do it as you do with standard date time field
="Report Execution Date : " & Month(Globals!ExecutionTime)&"/"& Day(Globals!ExecutionTime)& "/" &Year(Globals!ExecutionTime)
Would be one way .
Thanks
Rajkumar Yelugu

How to get data dynamically into the input form fields.

hey guys,
I have created an input form in VC and it has 2 fields which r 'drill-down' type.Now what i want is that the entries for the fields should come automatically on deployment in the portal.what i mean is that e.g. u have a field 'location' and it is drill down type. Now when u run the model , in the input form the 'location' field entries should be populated automatically i.e the entries should b fetched from the server directly.If u guys have any idea then plz help me.I m very liberal in awarding points.

Hi Anshul,
1.Create an form in your workarea.
2.Double click on the form element.
3.Add an dropdown component by clicking the Add button(+)
4..Go through the below link to populate values in it,
http://help.sap.com/saphelp_nw04s/helpdata/en/bf/39becc90824d4d999eb05336345e5e/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/96/c33a3382914f6d8aeba11413e3e356/frameset.htm

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to get data on the next page in case of templates if data is more ?

please tell me how to get data on the next page while i m using template in my first page , if data is more howw it can be displayed on the next page ?

HI Asim,
template is fixed we it can't be expand . u can better to use table line it can automaticlly expending if data is more ... u can create one more page like page 2 and create a window for entire second page ..then assign it in first page (next page page2).
regards
kiran kumar.

How to get data with the raw pattern from resultset ?

would you tell me how to get data with the raw pattern from resultset ?
thank you in advance!
longgger2000

I tried getBytes() and getObject()
, but I can not get the right result , for example the
data in oracle database is 01000000DFFF, when In used
the method of getBytes() and getObject(), I get the
result of [B@1c2e8a4, very different , please tell me
why !
thank you
longgger2000
[B is byte arrayseem that it return an bytes array for you.

How to get data from an existing Excel file using report generation toolkit

I'm trying to use the Excel Get Data vi from the report generation toolkit, but i can't figure out how to turn a browsable path into the right type for the VI. I've tried using the New Report.vi, but that doesn't work unless you use a template. It won't open an existing excel file and make it an open report to pull data from.
Essentially, i have a bunch of excel files that have data in them and i want to use a VI to analyze the data. So, i'm trying to pull in all the data directly from the excel file so i don't have to reproscess them all into text so i can use the more standard spreadsheet VIs. But to even convert the excel file programtically in labview won't i still need to be able to open the excel file and get the data?
Solved!
Go to Solution.

I C.
Got it,
the reason why I can view it using my Excel file because its in .CSV.
I open Microsoft Excel to open .CSV file.
But you can also open .csv file with notepad.
So, you cannot open .xls with Read Spreadsheet File
I learn something everyday
Best regards,
Krispiekream

How to get boot camp in the emac

how to get boot camp in the emac

Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows. Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware. You can use the iMac to do any data conversion before it gets sent back to the eMac over a network. See my FAQ* regarding Windows on the Mac:
http://www.macmaps.com/macosxnative.html#WINTEL

How to get data from a USB-UIRT device using Labview?

How to get data from a USB-UIRT device using Labview?
I'm trying to get data from a USB-UIRT device, is it posible with Labview?
I really appreciate your help,
thanks

You may want to contact the developer of the device for the API and DLL.
http://65.36.202.170/phpBB2/viewforum.php?f=3

How to get data type of variable in program..

Hi ABAP Guru.
I need to know how to get data type of variable or any structure field.. because I got short dump when use command REPLACE ALL OCCURANCE ... with variable/structure field that has data type I or P, I think it should be used with data type CHAR only, So I need to check the data type first.
Please give me your advice
Thank you all.
Nattapash C.

data : v_value type i,
v_char(10) type c.
v_value = 10.
move v_value to v_char.
REPLACE ALL OCCURRENCES of '#' from v_char....
Best regards,
Prashant

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

How to get data from database to JComboBox

hi
i am trying to get data which is in database. here the problem is i am getting only one row in the JcomboBox
i want all data just like list. i dont know how to get that . below is the code plz any one help me....
import javax.swing.*;
import javax.swing.JList.*;
import java.awt.*;
import java.awt.event.*;
import java.lang.String.*;
import java.lang.Integer.*;
import java.sql.*;
public class customer_code extends JFrame implements ActionListener
Container c=getContentPane();
JLabel customer_code=new JLabel("Customer Code and Name");
customer_code()
super("Customer Details");
setSize(300,250);
setVisible(true);
setLayout(null);
setLocation(430,310);
Font f=new Font("SansSerif",1,16);
Font f1=new Font("SansSerif",0,14);
customer_code.setBounds(10,20,250,30);
add(customer_code);
customer_code.setFont(f);
ResultSet rs=null;
String j=null,k=null;
try
System.out.println("MySQL Connect Example.");
Statement st=null;
Connection con=null;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:project","vikky","vishu");
System.out.println("Connected to the database");
st=con.createStatement();
rs=st.executeQuery(" select code as c,Customer_name as n from customer_details ");
while(rs.next())
j=rs.getString("c");
k=rs.getString("n");
System.out.println(j);
System.out.println(k);
String[] names = new String[] {j,k};
JComboBox comboBox = new JComboBox(names);
add(comboBox);
comboBox.setBounds(25,60,250,50);
comboBox.setFont(f);
comboBox.addActionListener(this);
comboBox.setMaximumRowCount(10);
con.close();
System.out.println("Disconnected from database");
catch (Exception e)
e.printStackTrace();
public void actionPerformed(ActionEvent event)
if ("comboBoxChanged".equals(event.getActionCommand()))
System.out.println("User has selected an item from the combo box.");
JComboBox comboBox = (JComboBox) event.getSource();
if(comboBox.getSelectedItem().equals("None"))
public static void main(String agr[])
customer_code cd=new customer_code();
}

r035198x wrote:
Also separate that database code from interface display code.
You should never access the database on the EDT.
See [Doing Swing Right|http://bytes.com/topic/java/insights/853297-doing-swing-right] for more details.
Yes! By the time you are working with Swing and JDBC you should already know how to structure code. If not, then you are not ready for these topics and you've jumped the gun.

How to get each thread in the threadpool

Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g :
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?

Willings wrote:
Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;You don't
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g : You don't
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?You should notify your "monitor" when you add something to the pool, and the Runnable/Callable should notify the same "monitor" when it starts to execute, and during its processing. Finally you notify the monitor when the execution has completed.
Kaj

How to get date appended in the filename of the IR reports

Similar Messages

Maybe you are looking for