How to get Distiller to display as a printer in my programs

Hi there, I recently re-installed and re-activated Creative Suite 3 on my Windows 8 computer, but Distiller does not display as a printer option in any of my programs. I already uninstalled and re-installed the bunch. Still no use. How do I fix this? Any suggestions?

Hi Sariensteyn,
This version of suite wasn't tested with windows 8.
I would suggest to upgrade to the latest version and that should help.
Regards,
Ajlan Huda.

Similar Messages

PLEASE CAN YOU TELL ME HOW TO GET PHOTOSHOP CC TO RECOGNISE MY PRINT PROFILES?

Profile problem
A question Adobe do not seem to be able to answer. Or rather they do not understand my problem.
I am having a problem getting Colour profiles for my printing papers recognised by Photoshop CC in My Mac OSX10.10.1 Yosemite
To put the profiles onto the Mac I did as follows >Computer>Mac HD >Library>Colour Sync >profiles >Recommended -then dragged the profile into this file.
The profiles appear in the print dialogue in Photoshop CS5 which I also have on my Mac
The profiles appear in Lightroom 5
In Photoshop CC the profile is NOT shown in the print dialogue and the profile list is very much shorter than in CS5.
Please can you tell me how to get Photoshop CC to recognise my print profiles?
I was thinking I would need to delete and re install but I have just downloaded the latest edition of Photoshop CC and the same problem applies.
It is rather frustrating to have to go from CC to CS5 in order to make a print!
Many Thanks
Tom Derbyshire
[email protected]

I don't know if this applies to your problem, but past problems in this form seem to recommend updating the printer driver when using Yosemite.

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

UREGENT: How to get a Image displayed on Canvas?

Hi, my problem is: I have an image drew on Canvas, but I cannot access this image through Java, the image is there on Canvas, but I simply can't get that image.
Anyone know how can I get an Image displayed on Canvas?

Pt 1. > but I cannot access this image through Java, the
Q1. > Anyone know how can I get an Image displayed on Canvas?
From the axioms given, I would say that it is not possible. :)
Why is it so UREGENT?

How to get that the invoice has been printed or not?

Hi Experts,
I have a issue in Printing Invoice. I have to make 2 copies of an invoice. One is Original and another is Duplicate. I have made that with copy windows. But the requirement is that when the original copy of a selected invoice has been printed then from the second time only the duplicate copy will be printed. How to do that in ABAP? How to get the information that the invoice has been printed or not?
Regards,
SURYA

Hi Surya,
Try the below approach, i think this is better than the previous approach and takes care of the print from "text menu" as well
select from z table.
if sy-subrc eq 0.
call "SMARTFORM_COPY"
else.
While calling the smartform, make sure you import the "JOB_OUTPUT_INFO" parameter,
and after you call the smartform,
call "SMARTFORM_ORIG"
exporting...
Importing...
job_output_info = w_job_output_info
exceptions...
If sy-subrc eq 0.
if w_job_output_info EQ 'X'.
update the Z table.
else.
do not update the z table
endif.
endif.
endif.
Regards,
Chen

How to get the total number of pages printed in a report?

Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.

i found the solution, thanks

How to get Adobe PDF to show in Printer dialog

Hi,
I just installed CS2 on my new Dell Inspiron laptop with Windows 7.
I can't get Adobe PDF as an option in the print dialog box. The Acrobat help files have help on how to configure it once it is in there but no guidance on how to get it installed. If I remember correctly it installed as part of Acrobat Professional on my previous Dell Laptop running Windows XP.
Thanks,

Acrobat 7 Professional.
I guess that explains it then.
Does this mean I will not be able to use any of the functions of Acrobat in Windows 7 of just some?
Can you recommend a site that might provide more info?
Thanks

How to get SAPGUI type (wingui or java) from an ABAP program

Hi everyone,
I am looking for a way to determine the sapgui type; that is if it is a wingui or javagui, from an abap program.
I know how to get the gui version with
CL_GUI_FRONTEND_SERVICES=>GET_GUI_VERSION
call and I also know how to get the platform with
CL_GUI_FRONTEND_SERVICES=>GET_PLATFORM
I simply want to determine if a certain sapgui running on a windows pc is a wingui or a javagui.
Any ideas?
Thanks,
Menelaos

Ok, I finally found it myself!
It is the function module:
RSAN_WB_TEST_GET_GUI_TYPE
at least on a 640 release.
Can I award me points?
Menelaos

How to get rid of lines on photo prints???

PSE12 win7 64 bit; HP OJ 7680; HP OJPro 8630;
all photo prints have horizontal lines (like grid lines);
same for psd and jpg;
same on different computer;
same photo printed using Photo Gallery has no lines;
How to get rid of lines in PSE12???

If you have layout showing you will see the borders of text boxes. Go to the View menu & choose Hide Layout & see if they disappear.

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to get iPad to reconnect with WiFi printer.?

I Could print from WiFi printer prior to 8.1 update. Now my iPad only looks for AirPrint printer - which I don't have but iPad cannot connect to WiFi hp OfficeJet 8500 AIO printer as it did before update. How to gei iPad to reconnect to WiFi printer?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

How to get Firefox to display pdf file in browser (Win 7, FF 19.0, AA 10.1.6, IE 9)?

After Firefox updated to version 19, when I tried to view a pdf file, the file appeared in a strange new viewer. Seemed to work OK, but I was concerned (didn't know that it is apparently a new feature of FF 19), and wanted the Adobe viewer back.
After a few minutes of viewing in the FF pdf viewer, a message appeared that said something like-- This viewer may not be displaying the document correctly. Would you like to use Adobe Acrobat instead?-- I clicked yes.
Now, when I click a link for a pdf file, it will either open automatically in Adobe Acrobat (windows application, not viewer within FF), or I'll get a dialog that asks whether I want to save the file or use Adobe Acrobat to open it.
I have followed the instructions here:
http://support.mozilla.org/en-US/kb/use-adobe-reader-plugin-view-or-download-pdf-files?esab=a&s=view+pdf+in+browser&r=0&as=s
Including:
http://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them
http://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them#w_using-a-pdf-reader-plugin
http://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them#w_check-application-settings
Delete the mimetypes.rdf file
Delete the pluginreg.dat file
Let me know if you think I've missed any info that would be helpful. Now that I know the new PDF viewer is FF native, I wouldn't mind trying it out.
Thanks!
Who
repair of Adobe Acrobat
If I start IE and click a pdf link within IE, I can view a PDF file within IE, but who wants IE?

Hi madperson,
It seems like there is some progress. After setting pdfjs.disabled to true, when I click on a pdf link, it still only asks me if I want to open the file with (application list) or save the file. However, when I look at the options dialog>applications, the selection for pdf documents changed from use plugin to use Adobe Acrobat Reader (not plugin). I scrolled through the selection list, but the Adobe plugin was not listed. However, when I look at the add-ons screen, the Adobe Acrobat Reader plugin is listed at the top. So, it seems like the plugin is installed, but firefox doesn't know it's there...somehow.
How do I uninstall the Adobe Acrobat Reader plugin and re-install? Can I just do that? Or, do I need to uninstall/reinstall the entire Adobe Acrobat Reader application?
Thanks
Who

HT204291 How to get full screen display in AirPlay mirroring on Apple TV?

Hi there,
I am using airplay from my iPad (new). Mirroring doe not utilize 100% of my screen width. There is always 3 inches of screen initialized on either side.
I tried using all the screen resolution of video in settings it does not help. Ting to note is that the problem is occurring only for mirroring. If I play videos directly in YouTube on Apple TV I get full display. Any reason how to resolve this to achieve full screen and 100% Mirroring?

No there is no way to Mirror full screen from an iOS device to the Apple TV. iOS devices are not 16:9 like your HDTV so the mirrored image appears as the size your iOS device would be if it were the size of your TV. Hope that makes sense.

How to get panel to display thumbnails sized to layer bounds instead of relative toentire document??

There is an option for this, but it only partially works...and was wondering if there is something else I'm supposed to know about to make the feature work as described...?
I can turn on the option to display thumbnails .. bit in only works for bitmapped stuff. None of my vector masks are shown at the size of their layer. (Note -- I have layer shaped by transparency set to off -- meaning the layer is shaped by the vector mask and not any content. This is confirmable by turning on the option to show layer bounds).
Yet, when I do this, it's obvious on the larger screen (if layer bounds are showing), that the vector takes up the full layer. But in the thumbnail, I often can't even the shape at all -- not very helpful.
So what am I missing? How do I get the vector thumbnails to display the size of their layer?
Thanks!

That's definitely NOT the case in Photoshop...
If you use the 'move tool', and you have "show transform controls turned on', it will show you the
corners of the layer -- the actual size of the layer...
You can verify this by going in and and creating a paint layer, say 1000x1000.
Now create a shape some small fraction of that... Any closed vector and attach it to the
layer, with Layer->Mask->Vector.
now check out the size in 'move tool' -- it will be 1000x1000.
Now go into image blending options and uncheck 'transparency shapes layer'.
Now, the layer is shaped by the vector -- not the transparent edges where your canvas ended.
Now, if you use move tool, you will find the 'corner' of the layer positioned around the vector, not
around the 1000x1000 layer you just created.
To round out the demo, save a copy of your mask if you want, and go into the mask panel
and select 'vector'. At the bottom, of the panel there is a tiny graphic of an arrow pointing down
onto a 'plane', (or layer). indicating to apply the vector mask to the layer. Do so.
Now go into blending options and recheck the 'transparency shapes layer.'
Try move again... Now note the bounding box is the SAME size as it was with the vector
attached... because you truncated the rest of the layer with the mask. You now have a smaller
object... that is that size... (I know... all this is very basic to a community professional), BUT
my point now, is that if the outline box that small bitmaped shape w/o the vector mask is only
say 100x100 (vs. before it was 1000x1000... and if it's the same size as BEFORE you
applied the mask WITH the vector there (but shaped/w/transparency off). Then I would assert
that the since the outline box is showing the size of the layer -- the size of the layers are the same.
Therefore, the vector takes up the full size of a layer that is shaped by that vector mask.
p.s. has Mylène put out any hits since your pseudo?

How to get a INTERMITTENT Display failure fixed?

I have a user that has a 15" Mac Book Pro just over 90 days old. I have looked at the system and the display will intermittently come up BLANK when it wakes up. If you open the display it will light up all bright but there will be no image. If you open and close the lid an inch or two back and forth it will INTERMITTENTLY bring up the image on the display. SOMETIMES if you close the display all the way and then re-open it, the display will work. I called the Apple Support line, but of course it is outside of 90 days so they want to CHARGE my credit card to trouble shoot the thing. I booted the device from the original DVD that shipped with the system and it has the same problem. I have even take pictures of it. I had the user of the system take it to the local "genius" bar. They would not help the user because the problem was intermittent. So how do I get an Apple Product fixed when Apple won't even look at it unless I pay them to troubleshoot it over the phone?
This is NUTS! I started supporting Apple products more than 15 years ago. I've never had such a headache trying to get a simple problem fixed. I'm part of a government research agency that does not hand out credit cards for diagnosing silliness. How can I communicate the problem to Apple when they won't the only path is through the "genius" bar that if it can't see the problem it can't exist?
Anyone got any ideas?
Thanks.

1.Apple is NOT charging you at this time.
They are merely getting a credit card # in case the problem is caused by something other than a warranteed item.
2.Intermittent symptoms make it difficult to diagnose problems.
Example:Take your car to a mechanic.Tell him "It did something twice,but it's not doing it now.Fix it".
If he can reproduce the problem,he may be able to effect repairs.If he can't,odds are he'll send you down the road.
3.If the "user" is the owner of the MBP,they need to use their own credit card.
If the "Government Agency" is the owner,you need to escalate the repair request up the Chain of Command to someone authorized to pay for needed repairs to equipment.
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.9)

How to get Distiller to display as a printer in my programs

Similar Messages

Maybe you are looking for