How to get head of the department(HOD) as an approver.

Hi Experts,
Existing scenario:
Created travel(international) request after getting approved by 1st level(line-manager) work item will go for next level(final approver Line exco).
existing code is attached.
To be developed Scenario:
After getting approved by 1st level (line-manager) work item will go 2nd level (Head odf hte department) prior to final approval(line-exco).
Please suggest me how to get Head of the department using bellow logic.
Pick the ORGEH ( Org unit) as on 31.12.9999 and pass it to HRP1001 with the following field values
RSIGN      A
RELAT      803
And pick the SOBID ID as on 31.12.9999
Now pass the SOBID in table HRP1001 , and pass the data with the following field values
OTYPE – O
OBJID – same as SOBID
RSIGN      B
RELAT      012
Pick the SOBID
Now pass the SOBID to HRP1001 and
RSIGN      A
RELAT      0008
SOBID : PERNR
Pass the PERNR in PA0105 pick the data against SUBTY 0001 .
Thanks in advance
Goutam

why not use an HR evaluation path (transaction OOAW see for example WF_ORGUN ) and read the path with RH_STRUC_GET function module?
https://help.sap.com/saphelp_erp60_sp/helpdata/en/c5/e4b2c8453d11d189430000e829fbbd/frameset.htm

Similar Messages

How to get header in the ALV report

Hi
I want to print header in the ALV report.But i am not getting that.Plz see my program it is getting error and also not printing header.If there is any error means plz give me the solution.In this program there is an error.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: heading        TYPE slis_t_listheader,
      wa_header      TYPE slis_listheader,
     events         TYPE slis_t_event.
data: l_string type c.
data: ivariant(1) type c,
      itvariant like disvariant,
      w_variant like disvariant.
initialization.
REPORT_ID = SY-REPID.
PERFORM pgm. "F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
*PERFORM init.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
   DEFINE ls_fieldcat.
   add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname    = &1.
    ls_fieldcat-outputlen    = &2.
    ls_fieldcat-seltext_l    = &3.
     ls_fieldcat-emphasize = &4.
    append ls_fieldcat to lt_fieldcat1.
    clear ls_fieldcat.
END-OF-DEFINITION.
    ls_fieldcat 'VBELN'           '10'     'Sales Order Number'.
   ls_fieldcat 'POSNR'           '6'        'SO Item'.
    ls_fieldcat 'MATNR'           '13'      'Material No'.
m_fieldcat1 'NETWR'           '13'        'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
I_CALLBACK_PROGRAM                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
   IS_LAYOUT                         = I_LAYOUT
   IT_FIELDCAT                       = lt_fieldcat1
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =   ITVARIANT
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
   I_SAVE              = ivariant
CHANGING
   CS_VARIANT          = itvariant
EXCEPTIONS
WRONG_INPUT         = 1
NOT_FOUND           = 2
PROGRAM_ERROR       = 3
OTHERS              = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM pgm. "F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.
*regarding logo and header,,,,
*first store the logo in T-code OAOR, then call that in your report.....
*data: heading        TYPE slis_t_listheader,
     wa_header      TYPE slis_listheader,
    events         TYPE slis_t_event.
To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading.                              " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,'dbcnt' TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
     i_logo             = 'ENJOYSAP_LOGO'
      it_list_commentary = heading.
CLEAR heading.
ENDFORM.                    "top_of_page
*to execute top-of-page you have to create events.
*for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
                         INTO ls_event.
IF sy-subrc = 0.
    MOVE formname_top_of_page TO ls_event-form.
    APPEND ls_event TO p_events.
ENDIF.
ENDFORM.                    " create_event

Hi,
   Find below code for your question, you may get some idea,,
*& Report ZACTIONGRIDPRACTICE
REPORT ZACTIONGRIDPRACTICE.
*data declarations.....
TYPE-POOLS SLIS.
TABLES : T529T ,PA0000.
data : gd_repid type sy-repid.
DATA : LD_COLOR(10) TYPE N.
DATA : GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV.
Data: is_fieldcat TYPE slis_fieldcat_alv.
DATA : GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : GD_DATUM TYPE DATUM.
DATA : BEGIN OF WA_TABLE,
                MASSN TYPE T529T-MASSN,
                MNTXT TYPE T529T-MNTXT,
                userg type userg,
                TOTAL TYPE I ,
                begda type begda,
                endda type endda,
                april type i,
                SLNO TYPE I,
                  LINE_COLOR(4) TYPE C,
                END OF WA_TABLE,
                IT_TABLE LIKE TABLE OF WA_TABLE.
data : april type i.
DATA : TEMP TYPE C.
data :    LT_PA0000 TYPE TABLE OF PA0000,
          LT_PA0000_T typE TABLE OF PA0000 with header line.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
        WA_FCAT LIKE LINE OF IT_FCAT.
DATA : IT_EVENTS TYPE SLIS_T_EVENT,
        WA_EVENTS LIKE LINE OF IT_EVENTS.
        wa_events-form = 'HEADER'.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
APPEND WA_EVENTS TO IT_EVENTS.
PERFORM HEADER.
DATA : SLNO TYPE I.
DATA : lv_output      TYPE dats.
CALL FUNCTION 'ZHR_RE_BE_CALC_START_DATE'
EXPORTING
    id_daberi   = sy-datum
IMPORTING
    ed_date_cor = lv_output.
select-options...
selection-screen BEGIN OF BLOCK B WITH FRAME TITLE TEXT-003.
select-options : s_date for sy-datum OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B.
lv_output = sy-datum - 27.
INITIALIZATION.
S_DATE-LOW = lv_output.
S_DATE-HIGH = SY-DATUM.
S_DATE-SIGN = 'I'.
S_DATE-OPTION = 'BT'.
APPEND s_date.
*AT SELECTION-SCREEN ON S_DATE.
*SELECT MASSN INTO TABLE IT_TABLE FROM PA0000 WHERE BEGDA IN S_DATE.
*SELECT STATEMENTS....
start-of-selection.
SELECT   t529t~MASSN t529t~MNTXT INTO TABLE IT_table FROM T529T where SPRSL EQ 'E' and t529t~massn in ('10','13','16','20','28','30','45','01','03') .
DATUM IN S_DATE.
PERFORM LAYOUT.
loop at it_table into wa_table.
LD_COLOR = 2.
LD_COLOR = LD_COLOR + 1.
if LD_COLOR = 8.
LD_COLOR = 1.
endif.
concatenate 'C' '1' '11' into wa_table-LINE_COLOR . "='C410'.
modify it_table from wa_table.
endloop.
LOOP AT IT_TABLE INTO WA_TABLE." = 'C410'.
select massn from pa0000 into table lt_pa0000 where begda in s_date and massn = wa_table-massn.
*write : / sy-dbcnt. gt s_date-low and endda lt s_date-high
*DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
move sy-dbcnt to wa_table-total.
READ TABLE lt_pa0000 INTO LT_PA0000_T WITH KEY MASSN = wa_TABLE-MASSN BINARY SEARCH.
DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
MOVE LV_LINES to wa_TABLE-TOTAL.
MODIFY IT_TABLE FROM WA_TABLE.
MOVE SY-TABIX TO WA_TABLE-SLNO.
MODIFY IT_TABLE FROM WA_TABLE.
REFRESH : LT_PA0000_t.
CLEAR : LV_LINES.
ENDLOOP.
loop at it_table into wa_table.
SELECT MASSN FROM PA0000 INTO TABLE lt_pa0000 where begda between '01.02.2008' and '20.02.2008'.
MOVE SY-DBCNT TO   WA_TABLE-APRIL.
MODIFY IT_TABLE FROM WA_TABLE.
*endloop.
*PERFORM STATEMENTS...
PERFORM FCAT USING '1' 'MASSN' 'ACTIONCODE'.
PERFORM FCAT USING '2' 'MNTXT' 'ACTION TYPE'.
PERFORM fcat USING '3' 'TOTAL' 'TOTAL'.
DEFINE m_fieldcat.
    is_fieldcat-fieldname = &1.
    is_fieldcat-hotspot = &2.
    is_fieldcat-seltext_m = &3.
    is_fieldcat-col_pos = &4.
    is_fieldcat-outputlen = &5.
    is_fieldcat-hotspot = &6.
    append is_fieldcat to it_fcat.
    clear is_fieldcat.
END-OF-DEFINITION.
   m_fieldcat 'SLNO' '' Text-012 '1' '17' ''.
m_fieldcat 'MASSN' '' Text-010 '2' '40' ''.
m_fieldcat 'MNTXT' '' Text-009 '3' '50' '' .
m_fieldcat 'TOTAL' '' Text-011 '4' '10' 'X'.
m_fieldcat 'april' '' Text-013 '5' '10' 'X'.
*FOR DISPLAYING THE RECORDS...
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = gd_repid
IS_LAYOUT = GD_LAYOUT
I_CALLBACK_USER_COMMAND           = ' '
   I_GRID_TITLE                      = 'REPORT'
   IS_LAYOUT                         = gd_LAYOUT
   IT_FIELDCAT                       = IT_FCAT
   I_SAVE                            = 'X'
   IT_EVENTS                         = IT_EVENTS
TABLES
    T_OUTTAB                          = IT_TABLE.
**&      Form FCAT
*FORM FCAT USING   FP_COL_POS
                 FP_FIELDNAME
                 FP_SELTEXT_M.
WA_FCAT-COL_POS = FP_COL_POS.
WA_FCAT-FIELDNAME = FP_FIELDNAME.
wa_fcat-seltext_m = fp_seltext_m.
APPEND WA_FCAT TO IT_FCAT.
ENDFORM.
*&      Form HEADER
      text
--> p1        text
<-- p2        text
form header .
DATA : IT_HEADER TYPE SLIS_T_LISTHEADER,
        WA_HEADER LIKE LINE OF it_header.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'ACTION TYPE REPORT'.
APPEND WA_HEADER TO IT_HEADER.
wa_header-typ = 'S'.
wa_header-key = Text-022.
CONCATENATE s_date-low+6(2) '.'
               s_date-low+4(2) '.'
               s_date-low(4)
               temp
               '.     TO      .'
               s_date-high+6(2) '.'
               s_date-high+4(2) '.'
               s_date-high(4)
               INTO wa_header-info SEPARATED BY space.
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = IT_HEADER
      I_LOGO             = 'HRRU_51050061'.
*select single bstkd into CORRESPONDING FIELDS OF gt_vbkd
*from vbkd where vbeln = rt_outtab-vgbel
*and posnr = '000000'.
*rt_outtab-bstkd = gt_vbkd-bstkd.
ENDFORM.                    " HEADER
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
GD_LAYOUT-NO_INPUT = ''.
gd_layout-colwidth_optimize = ''.
gd_layout-totals_text = 'TOTALS'(201).
gd_layout-info_fieldname =      'LINE_COLOR'.
ENDFORM.                    " LAYOUT

How to get Header in Downloaded .xls file using GUI_Download function

How to get Header in Downloaded .xls file using GUI_Download function ???
How to use the the Header parameter available in GUI_Download function .

HI,
see this sample code..
data : Begin of t_header occurs 0,
       name(30) type c,
       end of t_header.
data : Begin of itab occurs 0,
       fld1 type char10,
       fld2 type char10,
       fld3 type char10,
       end   of itab.
DATA: v_pass_path TYPE string.
append itab.
itab-fld1 = 'Hi'.
itab-fld2 = 'hello'.
itab-fld3 = 'welcome'.
append itab.
append itab.
append itab.
append itab.
append itab.
t_header-name = 'Field1'.
append t_header.
t_header-name = 'Field2'.
append t_header.
t_header-name = 'Field3'.
append t_header.
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
    EXPORTING
      default_extension     = 'XLS'
    IMPORTING
      fullpath              = v_pass_path.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                        = v_pass_path
      filetype                        = 'DBF'
    TABLES
      data_tab                        = itab
      FIELDNAMES                      = t_header
Cheers,
jose.

How to get header data in ME_PROCESS_REQ_CUST

Hi all,
how to get header data in badi ME_PROCESS_REQ_CUST-process_item

Isn't it available in the parameters of the method that you are tyring to write.
Regards,
Ravi
Note - Please mark all the helpful answers

I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants. Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

HOw to get rid of the borderline in the render list item of the news brows

HI,
HOw to get rid of the renderlist
border line,
Give Feedback link
Send To link in the news browser.
After removing thiese things, it should look like a normal html page .
how to achive this ,
if coding required then which is the par file I need to modify
thanks
pkiran

Hi PKG,
the "GiveFeedback" and "SendTo" links are called "FlexUI" commands. Most of that stuff is highly configurable and naturally you can remove them in the KM Configuration at
SystemAdmin->SystemConfig->KM->CM->UserInterface
-> ... -> ResourceRnderer
Your ResourceRenderer uses a CommandGroup. In this CommandGroup you can add/remove commands.
For example un your case its the CommandGroup "NewsDisplayGroup"
Kind Regards
--Matthias

How to get rid of the Login page in Portal?

Hi Guys,
I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!
Russel

Hi Russel,
You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
Check the access tab for pages and the manage tab for applications.

How to get rid of the black border around the artboard

Hopefully my last question for tonight.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border? Thanks
***Update***
I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

Doesn't change the fact my spider looks like a tick:)
Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

How to get rid of the old songs from iPhone that do not show up in iTunes?

Every time I delete my entire iTunes library and sync iPhone with it, my music is still loaded with old songs but do not appear on my iTunes. And when I add new songs to my library, the new songs get mixed with old songs.
How to get rid of the old songs?

hey buddy....u have to delete the songs from ur iphone....i have got the same issue.....songs are not showing in itunes!!!!!

How to get rid of the "time out" when using DAQ AI in the example program

I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
Thank you,
Yajai.

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

How to get rid of the main text box in the back of the page AND move things

I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

Hi, Dylan. Welcome to Discussions.
If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
Also, you can create a text box the width of the page and then set it for 2 or more columns.
When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
Hope this helps to get you started.
Walt

How to get rid of the message Client submission probe stuck in the Exchange Server Queue?

We have Exchange 2013 in Hybrid with Office 365.
How to get rid of the message in the Exchange Server Queue?
Mounting the database fixed it.
Thanks!!!

Mounting the database fixed it.

How to Get Rid of the Extra cents left on your gift Card balance?

I would very much like some help on how to get rid of the 65 cents I have left in my itunes account, without having to spend it on something, or make a new account, or contact Apple. Please someone help with this, I'm sure many other are having trouble as well!!!!

I noticed there is an extension which lets you clear the title of the current page or replace it with other text. This seems to work equally well in private and non-private windows, however, it doesn't appear to have an option to automatically do it in all private windows. Maybe someone can add that feature (the author isn't maintaining the add-on any more).
https://addons.mozilla.org/firefox/addon/page-title-eraser/

How to get rid of the "other" memory

I need steps to find a way how to get rid of the "other" memory. Ive tried deleting my photos. But my memory is still low. My iphone 4 is a 8GB and still that isnt much, and to have this "other" memory take most of it up is making me mad. HELP PLEASE!!!!!!

About “Other”:
http://support.apple.com/en-us/HT202867
Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Backup your computer.
3. Empty Trash.
   http://support.apple.com/kb/PH13806
4. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
5. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
6. Re-index Macintosh HD.
    This will take a while. Wait until it is finished.
    System Preferences > Spotlight > Privacy
    http://support.apple.com/kb/ht2409
7.Try OmniDiskSweeper. This will give the storage size details of the items.
   https://www.omnigroup.com/more
   Select Macintosh HD and click “Sweep Selected Drive” at the bottom.
   Be careful. Delete only the files that can be safely deleted. If you are not sure about any file, don’t touch it.
8. Move iTunes, iPhoto and iMovie media folders to an external drive.
    iTunes
    http://support.apple.com/en-us/HT201562
    iPhoto
    http://support.apple.com/kb/PH2506
    iMovie
    http://support.apple.com/kb/ph2289

How to get rid of the SAP BPC "three globes" startup screen?

Hi,
I am trying to figure out how to get rid of the SAP BPC "three globes" startup screen when we start BPC. I do not want it to pop up.
I looked at VBA behind the workbooks but could not find anything. Could not make the sheet invisible.
Is there a way to get rid of the screen? This is the screenshot
www.flickr.com/photos/chalinka/3471310254/
Thanks!

Just found the answer on this very forum!
Re: How to change the logo, (3 Globes) on the launch page
Posted: Mar 18, 2009 12:46 PM in response to: David Fletcher Reply
OK then, now v7sp03 for microsoft has hit the shelves, you can change the logo !!!
It is quite easy.
Have the logo file ready in either BMP, GIF or JPG format.
Put it in your "Server Install -> DataWebFolders[Appset]" folder (so where you keep your files).
In ApplicationSet parameters, add the parameter COMPANY_LOGO and in the options type the name of the file you just put on the server.
Now if you restart BPC for Excel, the second excel page that pops up should be showing your new logo or graphic (mine did).
The use of the logo has been documented in the admin manual -> working with appset parameters
Some tips.
I wanted not to clutter the filesystem so i put my logo in the appsetpublications folder and added the path accordingly in the parameter (so now it reads appsetpublicationslogoname.jpg instead of just logoname.jpg).
If you do not supply a name (only the parameter), your second Excel window (normally holding the graphic) will not appear. That could be an alternative too if you find that whole thing annoying.
Hope this helps you build great BPC apps,
Edwin van Geel

How to get head of the department(HOD) as an approver.

Similar Messages

Maybe you are looking for