How to get ICH Screen Element Objects

Would anyone tell me how to get ICH Screen element objects i.e Screen ID like ALRTOVW

Hi Bris,
You can run the transaction only from the normal SAPGUI. Try it once again in this format:
/N/SCF/SCREENCFG.
Best regards,
attila

Similar Messages

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

How to get 10 screens on a Mac Pro

Hi All:
I'm trying to figure out how to get 10 screens working together like one big desktop on a Mac Pro.
Currently I have a 12core 2010 Mac Pro with 2 ATI 5770 cards driving 6 30" cinema displays. Each of these cards are double wide.
I want to connect 4 65" LED displays.
Does anyone have an idea how I can do this? The Mac Pro has only 4 slots. The two 5770s take up 3 spaces (because of their doulbe wide size). The last slot has a OWC solidstate drive there. I guess I could remove that and use just a regular SATA SSD if need be, but would love to get this done with just 3 slots.
So some thoughts. There are two possible ways (ideal, and less ideal) that I can think of:
IDEAL way:
The ideal would be to find a single wide card that supports 5 or 6 displays, and use that. I know that some people have had success flashing single wide cards, but it's not clear if all the ports are usable. See here for an ATI card with 3 ports, single slot, that's been flashed:
http://www.ebay.com/itm/Apple-Mac-Pro-ATI-Radeon-HD-5770-1GB-Video-Card-Single-S lot-5870-/150928552679?pt=PCC_Video_TV_Cards&hash=item23240af2e7
Also, it's not clear if you could get 4 of those cards working to drive all 10 screens.
However, there are single wide 5/6 display cards like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150566&nm_mc=AFC-C8Junc tion&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&AID=10440897&PID=3332167&SID=u00000687
Has any seen or know of a 5 port card like the above that has been flashed to work in a Mac Pro?
LESS ideal way:
My guess is there are some PCI expansion chasis, and I can just put in 2 more regular ATI 5770s there. I found this:
http://www.jmr.com/en/products/14/3-slot-pcie-extender/
and this
http://www.magma.com/catalog/classic-pci-expansion
I'm not sure how well these extenders work.
EVEN LESS ideal way:
Perhaps getting another Mac or PC and somehow VNC'ing in is an option, but this likely would be too laggy to run video from one computer to the other. The ideal is to just treat the system like one giant screen, but I'm open to hearing any experiences/suggestions on getting this to work.
Thanks so much!

After reading up on it, it seems that the 6850 supports 3 displays. So perhaps I could do one 6870 (4 displays) in slot one, and then 2 single slot 6850's or 5770's in slots 2 and 3. This would give 10 displays.
I have 3 questions then:
(1) What is the quietest 6870 card people have successfully used in a Mac Pro?
(2) What is quietest single slot 6850 or 5770 card successfully used in a Mac Pro?
(3) Has anyone gotten thiis 5770 single slot card to work on a Mac Pro, and have they gotten 5 display ports to work?
http://xfxforce.com/en-gb/Products/Graphics-Cards/AMD/ATI-Radeon-HD-5000/ATI-Rad eon-HD-5770-Single-Slot.aspx

How to get full screen caller pic in ios 7.1

How to get full screen caller pic in ios 7.1.Please help me

Haha .. I have seen one million post on this issue since 7.1 was released. Everybody hates it and it is perhaps Apple's stupidest design decision. I, personally, happen to like it ... or not mind it as much either way, I should say.
But that's not what you asked ... Apple thought it was best for some odd reason to change the full screen pics to an itty bitty circle. As a previous poster said, it cannot be changed. But be sure to go to Apple's feedback website and let them know you are unhappy about it. I sense an iOS 7.1.1 coming out REAL soon!

How to change the screen element to be ineditable in Dynpro POV

Hi Experts, any one has experience on how to change the screen element to be ineditable in Dynpro POV?

Write this piece of code in the PROCESS ON VALUE-REQUEST..
PROCESS ON VALUE-REQUEST.
FIELD MARA-MATNR MODULE matnr_mod.
MODULE matnr_mod input.
LOOP at Screen.
if screen-name=<field_name>.
screen-input = 0.
modify screen.
endif.
ENDLOOP.
ENDMODULE.
Thanks
Venkat.O

How to get similar color for objects in different pictures

how do you get similar color for objects in different pictures
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
I have tried duplicating layers and it just replaces the whole image, it seems to work using levels layers but not the other layers ... I have 30 more images to do and would ideally not like to adjust all the images manually ? I dont mind doing minor tweaks. Essentially all the images where taken with the same camera and lighting and lens's ...
Screen shot is where I'm at at the moment...
I have posted this question else where but was told to repost - this is a link to my previous post as to where we got to
http://forums.adobe.com/message/4720576#4720576

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

How to get outdated screens in sap.

Hi.
Can u tell me How to get out dated(or unused) screens in sap or how to omit the outdated screens?
I.e In Va01 application there are some screens such as 130,461,4603,4604..
in above screens, for screen element 'vbak-vbeln' descriptions are shown as 'Repair request'/'mainatain reuqest".
I want to neglect above screens..

Hi Micky.
i want to neglect those screens..
I want to maintain screen elements for tcode va01.
i'm calling 'Import_dynpro' (it takes program name,screen,language and gives Screen elements and their descriptions)for each screen of va01.If i'm calling for 130,461 screens, for vbak-vbeln they r showing description as 'Maintain request/repair request..
i want to maintain updated Va01screens screene elements..

How to get the last element of a structure in a textfield in DesignStudio

Hello,
how can I get the last element of a structure within a bex query?
Within the structure we are working with dates that dynamically are buiId (input date - offsets for several months).
I have to show the last value in a single textfield within DesignStudio.
Regards
Frank

Hi Frank,
in DS 1.3 you can use forEach function to get the last element of BEx structure (or n-th element in general using if condition)
var array = DS_CROSSTAB1.getMembers("DHGY5D6XEFO1K45SB00BXFH7A",10);
var lastMember="";
array.forEach(function(element, index) {
lastMember = element.text;
TEXT_1.setText("Last structure element: "+lastMember);

How to get location of 3D object in a hierarchy?

It's easy enough to get the location of a 3D object at the root, but how do I get the location of a 3d object that is in a hierarchy?
For instance, if I have a baseball player (biped - 3dsmax), grouped as "player" and exported to Director, how do I then get the location of the biped's hand? (or the glove that is linked to the biped's hand).
I tried just doing the basic...
put member("BBplayer").model("glove").transform.position
but director can't find the glove.
It can find the root model "BBplayer", but not any child object.
Anyone know how to get the location of a child object?
Thanks!!

I downloaded and installed that xtra and it really just shows the same info that I get in my object inspector.
Ok, so for a biped and related skin/mesh/objects to export correctly to the .w3d file type, one has to select all the biped parts and related
meshes into one Group. This group then becomes the object in Director that all things are based from. My charcter looks and animates
fine in Director. However, I still can't get coordinate information from anything inside this group or inside the hierarchy of this group, only
the group itself.
If I look at the group, either in the object inspector or the xtra you suggested, none of the child models appear under modelResources, model or group. They simply don't show up as being in this group or the children to the group. Nothing does except a few things that are useless, like "group("Bip01 Footsteps"), or some of the nubs, like headnub, fingernub and a couple of toenubs. Why some nubs show up and some don't is yet another mystery.
Anyhow, none of this makes logical sense.
I simply want to "get" location information for any 3d model in the scene, regardless of what group it's in or the structure. Anybody? It has to be possible, this is a fundamental need of any 3D programming.
Thanks!!!

How to get Focused UI element on the Window in 7.01

HI,
We were on 7.00 and recently upgraded to 7.01. we have a problem with the upgrade.. The window object no more holds the Focus . Here is the code ... lo_curr_window->focus is blank all the times.. This was working fine till 7.00 and now it stopped working..
data:lo_window_manager      type ref to if_wd_window_manager,
        lo_api_component       type ref to if_wd_component.
data: lo_clnt_appl type ref to cl_wdr_client_component,"CL_WDR_CLIENT_APPLICATION,
          ls_view_mgrs type wdr_viewman_line,
          lo_curr_window type ref to cl_wdr_window,
          ls_focus type wdr_focus,
          lo_uielem type ref to cl_wd_uielement,
          lv_path type string,
          lo_selected_elem type ref to if_wd_context_element,
          lt_strtab type table of string,
          lv_colname type string,
          lv_tablen type int4.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_clnt_appl ?= lo_window_manager.
read table lo_clnt_appl->view_managers_for_window
              into ls_view_mgrs with key name = `ZWD_TEST`.
if sy-subrc = 0.
get the window in which this interface view is embedded
    lo_curr_window = ls_view_mgrs-view_manager->get_window_recursive( ).
    if lo_curr_window is initial.
      lo_curr_window = wdr_task=>application->application_window->get_active_modal_window( ).
    endif.
    if lo_curr_window is not initial.
      ls_focus = lo_curr_window->focus.
      lo_uielem ?= ls_focus-view_element.
   endif.
endif.
Thanks
Mahesh

You seem to be utlitzing SAP internal APIs - so a change in behaviour between releases certainly seems possible. Refer to the online help to find out which APIs are safe to use:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/64/be5b4150b38147e10000000a1550b0/frameset.htm
What exactly are you trying to acomplish? From your code you seem to be trying to get the UI element that has the current focus. Is that correct? To what purpose?
Perhaps you should review the online help section on Focus Handling:
vhttp://help.sap.com/saphelp_nw70ehp1/helpdata/en/c0/800f02bb734dd9977a64a8a7e87fe3/frameset.htm

How to get to screen where agree to license and continue in installing acrobat 9 pro on a macbook pr

how to get to the screen where request ot agree to license and continue in loading acrobat 9 pro on macbook pro?

Hi feivey
Go to Help->Activate -. Put your Serial key to activate

How to get the text elements for a particular program

Hi All,
I want to get the all text elements , selection texts for a particular program...How to get.
I have used one FM READ_TEXTELEMENT_FROM_REPORT , but not much useful..
please help me..
Regards,
raj

Hi..
You may use this statement to read the text elements:
DATA: i_reptx TYPE STANDARD TABLE OF textpool WITH HEADER LINE.
READ TEXTPOOL (reports) INTO i_reptx. " reports is the report name.
Best Regards,
Pradeep.

How to get ME23 screen using selection-screen

Hi,
I am trying to get the ME23 screen using selection-screen with following code.
select-options: purordno for ekko-ebeln NO intervals.
SUBMIT SAPMM06E VIA SELECTION-SCREEN .
But at the time of execution i got this error "INCORRECT PROGRAM TYPE WITH SUBMIT".
Can any one please provide me some sample code how to get the ME23 screen
using Abap program.
Regards,
krishna/rajesh.

Hi Rajesh,
You can't submit a pool modul ( SAPMM06E ).
Only executable prog can be submit .
What you can try is use "CALL TRANSACTION" statement.
Hope this helps,
Erwan

How to get sub cluster element's caption?

Hi All,
I have a big cluster, which contains several sub clusters. They are all typ def. My queation is,
how to get the sub cluster element's caption?
Thanks.
Anne
Solved!
Go to Solution.

Find the VIs in 8.5
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
Get caption.vi ‏10 KB
typ def.ctl ‏7 KB

How to get absolute screen position for component in borderlayout?

I am trying to get the screen location for a point in a component in a panel. The panel has a borderlayout(). The component is currently in the CENTER position of the layout. When I use the getBounds() method for this component I can get the <x,y> coordinates relative to the client area of the panel. But that does not include the frame. I
Does anyone know how I can do this?

There is a convertPointToScreen method in SwingUtilities:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/SwingUtilities.html

How to get ICH Screen Element Objects

Similar Messages

Maybe you are looking for