How to get line out on Ultrabook XPS 12

I need to connect my speaker preamplifier to the XPS 12, but do not see a line out selection from the headphone port on the computer. How to I get access to line out?

Hello. On all Dell laptops the headphone jack doubles as the line out.
trvlnw
connect my speaker preamplifier to the XPS 12
Not sure what you are trying to do. If you need to get a line level signal into the laptop, there is no line-in port so you would have to get a usb audio interface with a line-in jack. But use the headphone jack to get a line level signal out of the laptop.

Similar Messages

How to get lines in between two fields in smartform

Dear Freinds,
               I have developed one smart form however iam not getting output correct could you please help me out, the problem iam getting is iam not able to get the following things
in The Main Window
         i have one header , one Main Area and one Footer Area
in the header i have created one %ROW1 and named as Row and again under the ROW i have
created a % Cell ...........again i want to create for the same Row iam not able to creeate another
Cell.........please let me know how i can have 5 or 6 cells for the same Row .
as i want the output as
UNit No. : 103              Quantity Req : 200   Date of Issue : 10/01/2008
Destination : Delhi         Amount       : 300    Rate/Per unit : 7
and secondly i have to have lines between the rows .... so please do let how to get lines in between rows as well..
i have tried allot but not able to get.
regds
madhuri

Hi Marcin Pciak ,
             Thank you very much for giving me the solution, one more point i require in this regard
i have requirement as below
IDNo                                      Invoice Amount
Despatch Date                      Despath Time.
Now i want i created Two Cell s (Cell A & Cell B) could you let me know how i can get IDNO and
Invoice Amount adjusacent to each other as above but right now iam getting in my smarform
IDNO
Invoice amount
but i want is IDNO--    Invoice Amount--
please help me this point
thanks once again for giving me answer.
regards
madhuri

How to Get In & Out of Match, Get your Downloads and Run

How to Get In & Out of Match, Get your Downloads and Run
So you have read the marketing hype, and are thinking what you really want is to pay for the service to upgrade your low quality bitrate files to a bit better 256KBPS rate easily, as don’t fancy rebuying/ reimporting or other method
This guide should show you the fastest route to achieve you upgrades
It assumes you’re working from your main music library, and know something about IT, and have <25k of music files
Backup your music files
If you know how to do this, its simple right – so once done then move to step 2, if not read below so you don’t blame me for a loss
Transfer Hardware
your choice the transfer hardware, suggest offline harddrive via USB3.0 (blue USB connector/eSata/ 1494b/1GB NIC/etcetera but your call
If you use USB2.0/ 100MB NIC/1394a or other lower transfer method, accept the time hit
Don’t use Time Backup/local disk backup software unless you have RAID 5 setup or better (and if wondering what that is, you almost certainly don’t then)
Don’t use internet backup service unless you live next door to the hosting company, with stunning internet connection to envy 99.9% of the human race, remember this is the fast method folks)
Transfer Software
I am assuming you know how to do a copy n paste/ robocoby/xcopy/drag n drop or whatever method turns you on via finder/explorer/cmd window ect
Caveat #01: If not sure how to do above, then stop now as you are not IT literate ready for this
Find your music files and back them up
Now keep the computer running, preferably with nothing else running from this point for ease of use bar an active internet connection, and power saving switched off
If you know where the files are great, backup the files, but some don’t so for them as below
Caveat #02: if you don’t know how to find them your most likely on default settings, or sitting with a legacy from a past upgraded machine - below should help but you might want to stop now if you have never been curious about the location before
Within iTunes , go to [Edit/Preferences/Advanced] and note down the location shown for Itunes Media Location
In the same location of preferences, hit [Keep iTunes Media Folder organised] and let the application do its stuff. You will end up with the location in 1ciii a ready to copy location which for simplicity of topic, copy the whole folder and its subfolders. You may end up with some extra copies of music files (an iTunes safety mechanism, but it won’t show in the folder location, and we can ignore later on)
Enable Match (after paying for the service)
Run Match
Accept that the Apple iTunes process is not perfect, may crash/stop/pause and reboots will be needed, and we can move on so to speak. Key here is you cannot do an unattended script or assume no end user interaction needed L
Turn on iTunes Match, notice the new ITunes Match on the left hand sidebar, click it, then hit the Start button – if it works and you eventually get to STEP 3 perfect.
If it fails before getting to STEP 3, reboot and restart
If this still fails to get to STEP 3, then create a new iTunes database (browse forums on how to do), read your media files from the location in 1civ
Stop MATCH (the upload process only, not the service)
Once STEP 3 starts, CLICK STOP - ASAP, as all this does it upload data, and you don’t want to do this, just get your upgraded files (remember the title of this entry your reading!)
This also avoids future issues with Album art lost
Delete Matched low bitrate files
Create a NEW SMART playlist, with two criteria
Show all files with bitrate is less then 256
Show all files where iCloud status is MATCHED
In the new playlist, click it and it shows the files we want to blow away.
Click Edit / Select All then
Click ctrl in windows/apple (cmd) logo in mac, and press delete button, ensuring you do NOT tick the delete from iCloud Option. Now want a few mins for it do do its stuff.
Download Upgraded BitRate Files
In the same location as 5, reselect all, and right click, and select the option to download all, and off it goes
On the lefthand sidebar in iTunes, click Downloads, and you will then see in the middle bottom screen an option for simultaneous downloads (select it)
Your done Just let the app now do its stuff. I would ignore the message saying you can get on with other things, and use anther machine, preferably not using the same internet connection.
Optional Steps:
Click randomly from the Itunes/Matched/256KBPS listed files, and play them. Not all the files, one every 30 or so, and just the start, then last few seconds to check not dead or corrupt files.
Update your Step 1 backup with the new files, which is going to take up more space, guess at 40%.
Kill your iTunes Match account (both the recurring automatic subscription, and the account if not continuing to use the store part of iTunes)

bump

How to get line in Line chart to go to edge / border of graph

Post Author: brutschm
CA Forum: Charts and Graphs
How to get line in Line chart to go to edge / border of graph?
I've seen this before but can't remember how to do it now. I'm using Crystal Reports XI
Thanks,
Brandon

Post Author: V361
CA Forum: Charts and Graphs
Not sure if this is what you are looking for.
Group X Axis setings, uncheck the Value axis crosses Between Groups.

How to get line item net price and net value?

I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?

Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty

My 4gb SDHC flash mem card is stuck in DVD slot on my iMac 27". How to get it out?

I misplaced my 4GB flash memory card (Canon camera) in the DVD slot (above the card slot) and it disappeared while I was trying to get it out. Naturally I inadvertently (spelled "stupidly") knocked it inside and could not figure out how to get it out. The dust rubber "shields" hide it and I've tried to find it with a toothpick and wedge it out, to no avail. Are there any ideas or suggestions others may have used to get it out (I know turning it on it side and shaking won't work). Why in the world did they design it like it is -- I've had it happen to me and others have also told me of their misadventures, but they also were able to gradually get it out. This time, it's in too deep. Can I ignore it and still use the CD/DVD slot without it blowing up?

You might need to take to an Apple technician or apple dealer to let them take apart the iMac and remove the flash memory card. if you're very careful you might try a pair of needle nose pliers and a flashlight but it's easy to do damage to the DVD internal mechanical if you're not real careful.
A good story to tell your grand kids maybe ;-)
Good luck

How to get data out of XML?

Hi,All.
I am running SAX (JAXP1.01) in Applet to process XML file. My question is how to get data out of xml format according to the field name (@age,@rank etc)
and write into string buffer seperated by comma.
Should I use SAX or DOM? (file size is big)
My xml as follow :
<ROOT>
<FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@team/relay}">
     <ObjectName>Field124</ObjectName>
     <FormattedValue>HUNTER</FormattedValue>
     <Value>HUNTER</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@age}">
     <ObjectName>Field125</ObjectName>
     <FormattedValue> 19</FormattedValue>
     <Value> 19</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@Rank}">
     <ObjectName>Field126</ObjectName>
     <FormattedValue>43</FormattedValue>
     <Value>43</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{results.athrel_name}">
     <ObjectName>Field127</ObjectName>
     <FormattedValue>1-1 NORRIE</FormattedValue>
     <Value>1-1 NORRIE</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2}">
     <ObjectName>Field128</ObjectName>
     <FormattedValue>1:54.75</FormattedValue>
     <Value>1:54.75</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1course}">
     <ObjectName>Field129</ObjectName>
     <FormattedValue/>
     <Value/>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1std}">
     <ObjectName>Field130</ObjectName>
     <FormattedValue/>
     <Value/>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2course}">
     <ObjectName>Field131</ObjectName>
     <FormattedValue/>
     <Value/>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2std}">
     <ObjectName>Field132</ObjectName>
     <FormattedValue>QT</FormattedValue>
     <Value>QT</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@points(left)}">
     <ObjectName>Field133</ObjectName>
     <FormattedValue/>
     <Value/>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@pointsdecimal}">
     <ObjectName>Field134</ObjectName>
     <FormattedValue/>
     <Value/>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:decimal" FieldName="{@points(right)}">
     <ObjectName>Field135</ObjectName>
     <FormattedValue>0</FormattedValue>
     <Value>0.00</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1}">
     <ObjectName>Field136</ObjectName>
     <FormattedValue>1:55.98</FormattedValue>
     <Value>1:55.98</Value>
</FormattedReportObject>
<FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@Rank}">
     <ObjectName>Field137</ObjectName>
     <FormattedValue>43</FormattedValue>
     <Value>43</Value>
</FormattedReportObject>
Repeat...
</FormattedReportObject>
</ROOT>
------------------------------------------------

For big files use SAX: quicker and less memory usage.
The xerces parser from Apache has some examples. Basically what you do is scan the XML, remembering what tag you are and once you find the right tag, read the contents.

How to get graininess out of black areas?

How to get grainiesss out of black or dark areas?

you can't.
a) too low light recording results in 'noise' due to in-camera amplification
b) noise is handled by the compressors as 'content'; which results in blocky artefacts.
for FCPX are plugins avail, as the famous Natress DeNoiser, which smoothen such pictures (very well). a $$$ solution.-
next time more light …

The headphone connector broke off inside my Ipod, any suggestions on how to get it out?

The headphone connector broke off inside my Ipod, any suggestions on how to get it out?

See this previous discussion:
Broken headphone jack! 3.5mm dillemma....: Apple Support Communities

How to Get Lines in Pie Charts

Using CF7 and WebCharts3D, and got my pie chart working. Only
problem, I can't figure out how to get it to show LINES from the
label of each pie slice, to the label's corresponding slice. The
pie slice labels (descriptions) appear outside the pie chart, which
is where I need them. But when you get a pie chart with a lot of
slices (say 8 or more) and a lot of smaller slices close together,
it's hard to tell which label applies to which slice. Hope this
makes sense.
All I need is to ADD A SMALL LINE from each label to it's
corresponding pie slice. I've looked for options in WebCharts3D to
do this, but can't seem to find anything (in the Decorations,
Series, etc., sections).
If this is possible (getting these lines to appear) could
someone please advise how to do this? Greatly appreciate any
help/advice. (It's probably something very easy, and I just missed
it).
Gary

I was afraid of that. Just wanted to make sure I wasn't
missing something. Thanks for the note and for confirming. Much
appreciated.
Gary

Huge Problem: How to get Information out of the SAP System into MySQL?

Hi all
Im totally despaired... So im comming here, hoping to find ANY solution.
I wrote a Program, which creates a internal Table wich some information from many DDIC-Tables. The internal Table is about 7 Columns, with only char fields.
Also I have a MySQL Server (reached through the Internet), with a database on it, and a table, which looks 1:1 as my internal Table in ABAP does.
Now I want to append the Data from the internal Table to the MySQL Table.
Is there ANY chance of getting this done?
and btw. can I append this Data with a secured connection?
THX for help...
greets
Markus Voelker

Think of Orchestrator as a "router", that will route information and workflows between SCOM, and [insert 3rd party product here]. Depending on your 3rd party product, there may be an "integration pack" for it that Orchestrator can use for out of the
box tasks.
So what's an integration pack? Well - think of it like a management pack, but for Orchestrator. SCOM does monitoring, but it doesn't know how to monitor something unless you install the relevant management pack. The management pack contains
all the rules/monitors for monitoring whatever it is you wish to monitor.
Well, an integration pack is similar in concept, except it tells Orchestrator how to interface and integrate with whatever it is you're trying to perform tasks with.
For what you want to do, there is a SCOM integration pack. This is a set of tasks that can get alerts and events out of Operations Manager (there are also tasks that can create and close alerts in Operations Manager).
From what I can imagine - you would want to get alerts out of SCOM when they happen (so you would use one of the SCOM orchestrator tasks to "get alert if status = new, and source = myapplication"), and then you can pass that alert to another task - such
as write it to a CSV file or something. You could then have another task that picks up that CSV file, and passes it to your application where it can be captured. Or you could use the CSV to populate variables in a powershell script, and then powershell
that information into your app.
There are many ways you could do this, but I do believe that Orchestrator would be the better option.
http://www.dreamension.net

How to get the OUT value of a PL/SQL procedure?

that is to say, I want to get a number form a procedure which code is familiar to:
create or replace procedure get_salary(
name in varchar2,
id in varchar2,
salary out number
In java code, How to get the value of salary?
PLZ

You'll want something like this:
CallableStatement stmt;
Connection conn;
<< Create connection to database >>
stmt = conn.prepareCall( "{call get_salary( ?, ?, ? )}" );
stmt.setString( 1, someName );
stmt.setString( 2, someID );
stmt.registerOutParameter( 3, java.sql.Types.INTEGER );
stmt.executeUpdate();
int outSalary = stmt.getInt( 3 );Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

My ipad is stuck on Account Not Verified . Can anyone tell me how to get close out of thisMy ipad is stuck on Account Not Verified . Can anyone tell me how to get close out of this (is there a Ctrl alt delete type of resolution for the ipad) Thank you.

My IPad is stuck on Verifying. I'm on the Settings page and there is a box that says Account not Verified. At the bottom is something in red asking me if I want Delete Account? It's been stuck for an hour. I tried turning my IPad off, but when I go back on and into Settings it's still there. Does anyone know how to get out of this? Thank you.

To do a reboot, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

How to get Line Number in Purchase Order

Hi Experts
I want to get Line Number of Matrix of Purchase Order. How I get it ?
I want to compare Matrix Line Number with Line Number of POR1 in DB.
Please Help me.
Hepil Doshi

Hi Hepil,
Linenum in Matrix "38" is Columns.Item("110").Value
SBO application doesnot show it, but you can get the linenum from that column.
You can test by getting the column title. omatrix.columns.item("110").Title
Hope it helps.
Regards
Edy

Itunes 8 how to get video out of there to Zen mozaics

I am totally?lost. Anyone have help to tell me step by step for itunes 8 how to get the kids video of Jonas bros to the creative Zen Mozaics. This is hard for me HELP . Thanks Stephanie a Mom in crisis LOL

Please first check the the format of the kid video that you would like to play on the Creative Zen, then follow the guide below, i'm sure you can make it easily.
How to convert video to Creative Zen compatible
You have a portable video/audio player, lets say a fancy Creative Zen, which you got as a gift from your friends or you bought for yourself, and would like to watch your favorite movies or just listen to the beautiful music using it's Sometimes you might encounter such an embarrassing situation as you are trying to playback a certain file format (video/audio) on it, but it just cant work out. Creative Zen video converter is just the program you need. It is a simple yet powerful Video to Creative Zen converter software that can convert almost all video/audio formats to Creative Zen compatible format and enables you to solve these problems quite easily with a few mouse clicks.
The Creative ZEN is a range of digital audio players (DAPs) and portable media players. All players are compatible with MP3 and WMA, while various models support WAV and Audible files. They are nati'vely compatible with Windows, while the current players exclusi'vely support Windows XP and Vista. They also support various other formats: Video: iMJPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-, and MPEG-2 are supported, but must be transcoded with the included software (Video must not exceed the player's dimensions at 320240 pixels); Audio: MP3, AAC (unprotected ".m4a"), WMA (including protected), WAV, and Audible 2, 3, and 4 formats.
At the moment when you feel you got what you wanted of using Creative Zen video converter, there are reasons to save your project, in case if you want to change any adjustments and settings late, or a desire to get the resulting video as soon as possible. The both things will seem to be a trifle to do if to follow the steps below.
Tutorials
Step by Step on how to convert video to Creative Zen with Creative Zen video converter
Step Download and install Creative Zen video converter
Click here to download and install it by running Creative Zen video converter.exe
Step 2: Run Creative Zen video converter and select a video/audio file you want to convert.
Click the Add or File button to choose a file type that need to be converted, you can convert simply audio format or video format. while you can set an output path for the resulted video by hitting the Output drop-down list.
Step 3: click the Edit button to set detailed info for the desired video.
A. Click the Trim button to set the length/range of the video that need to be converted.
You can choose a small part of a movie or the whole one to convert to the selected format
B. Click the Effect button to tune the saturation, contrast, brightness values and make sure are the one you preferred, preview the change on the screen.
C. Click the Crop button to cut the unnecessary part or black part of the movie.
Step 4: Convert video
This step will take you a moment to carry out the conversion process, the time vary with different parameters you set.
Step 5: Upload resulting video to your portable
You need a USB cable to transfer the converted video to your Creative Zen.
please check the specific tool you would like to have to work with your Creative Zenothers: avi to Creative Zen MP4 to Creative Zen WMV to Creative Zen 3GP to Creative Zen MOV to Creative Zen flv to Creative Zen vob to Creative Zen rm to Creative Zen rmvb to Creative Zen mkv to Creative Zenasf to Creative Zen mpg to Creative Zen DVD to Creative Zen

How to get line out on Ultrabook XPS 12

Similar Messages

Maybe you are looking for