How to Get Lines in Pie Charts
Using CF7 and WebCharts3D, and got my pie chart working. Only
problem, I can't figure out how to get it to show LINES from the
label of each pie slice, to the label's corresponding slice. The
pie slice labels (descriptions) appear outside the pie chart, which
is where I need them. But when you get a pie chart with a lot of
slices (say 8 or more) and a lot of smaller slices close together,
it's hard to tell which label applies to which slice. Hope this
makes sense.
All I need is to ADD A SMALL LINE from each label to it's
corresponding pie slice. I've looked for options in WebCharts3D to
do this, but can't seem to find anything (in the Decorations,
Series, etc., sections).
If this is possible (getting these lines to appear) could
someone please advise how to do this? Greatly appreciate any
help/advice. (It's probably something very easy, and I just missed
it).
Gary
I was afraid of that. Just wanted to make sure I wasn't
missing something. Thanks for the note and for confirming. Much
appreciated.
Gary
Similar Messages
-
How to get line in Line chart to go to edge / border of graph
Post Author: brutschm
CA Forum: Charts and Graphs
How to get line in Line chart to go to edge / border of graph?
I've seen this before but can't remember how to do it now. I'm using Crystal Reports XI
Thanks,
BrandonPost Author: V361
CA Forum: Charts and Graphs
Not sure if this is what you are looking for.
Group X Axis setings, uncheck the Value axis crosses Between Groups. -
How can we create dynamic pie chart in jsp
hi im a new jsp programmer and i just want to know how can i create dynamic pie chart in jsp
http://sourceforge.net/projects/jfreechart
- Saish -
How to get lines in between two fields in smartform
Dear Freinds,
I have developed one smart form however iam not getting output correct could you please help me out, the problem iam getting is iam not able to get the following things
in The Main Window
i have one header , one Main Area and one Footer Area
in the header i have created one %ROW1 and named as Row and again under the ROW i have
created a % Cell ...........again i want to create for the same Row iam not able to creeate another
Cell.........please let me know how i can have 5 or 6 cells for the same Row .
as i want the output as
UNit No. : 103 Quantity Req : 200 Date of Issue : 10/01/2008
Destination : Delhi Amount : 300 Rate/Per unit : 7
and secondly i have to have lines between the rows .... so please do let how to get lines in between rows as well..
i have tried allot but not able to get.
regds
madhuriHi Marcin Pciak ,
Thank you very much for giving me the solution, one more point i require in this regard
i have requirement as below
IDNo Invoice Amount
Despatch Date Despath Time.
Now i want i created Two Cell s (Cell A & Cell B) could you let me know how i can get IDNO and
Invoice Amount adjusacent to each other as above but right now iam getting in my smarform
IDNO
Invoice amount
but i want is IDNO-- Invoice Amount--
please help me this point
thanks once again for giving me answer.
regards
madhuri -
How to get line item net price and net value?
I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty -
Hi,
When i create pie chart in MS Excel and copy it to illustrator and remove unwanted elements and again export it to QuarkXpress/InDesign in .EPS format, in transparent mode. I get a rugged cirle lines.
When everything is done and the PDF of the file is created, when i close obsever the pie chart in through the Adobe Reader, the pie chart shows rugged circle instead of smooth circle. Is it fine or ?Hi Mike,
Thanks for the input. But my report is to show top 3 salaries from all job types.
below is my query:
select null link, job,sal from (
select job,sal from (
select job,sal,
row_number() over(partition by job order by sal desc) rn
from emp)
where rn<2
order by sal desc)
where rownum<=3;
In this case how can i multiply the total sal with sal?
Regards
Mohan -
I have no idea how to set up a pie chart for tracking spending with categories
This is what I want to do to help me track my credit card spending.
I want to make a Numbers sheet where i can jot down how much money i spent on a item, and what category that item would go with (example, food, electronics, gas, so on).
and then i want to have a pie chart that will show much how much money i'm spending in each category and how much of a percentage of the total each category takes up of the whole.
I have no idea how to set this up in a sheet. I tried typing it in a few times and every time i go to make a pie chart, it never shows me any of the results i want to see.
can someone please help me set up a sheet to be able to get this information to display correctly in a pie chart?Brad,
Create a table with the categories and the data (for now you can make up the data):
Now add a chart from the Charts menu in the toolbar:
Now click the "Add Chart Data" button just below the chart.
Now select data (from column B) in the table. Last trick is to click the menu at the bottom-left corner of the window and change the selection to "Plot rows as series" :
Now add formulas to the table to properly summarize the data from your data entry table using the sumif() function. -
How can I create a Pie charts ?
HI all,
I'm a beginner in java and i'm investigate in a web project (website) which should display statistical charts. I did a beans to generate basic bar charts, but it is most difficult to build a Pie chart. That's why i need help to put me on the rigth way to build Pie Charts beans (this pie charts should be filled up with db query).
Every kind of help will be appreciated.
Thanks in advance
Hope someone can help me.
STFI take it you constructed the bar graphs using html and images together?
Obviously it's a little more difficult to make a pie chart with html. Chances are that it will have to be an image rendered by a Servlet or JSP. I suggest looking at how to create images using AWT or swing. This will allow you to create a circle with different color slices and what not. Then you need a Servlet or JSP that will send the image out the output stream. You can then place an image tag in your html page like this <img src="http://myserver.com/PieChartServlet>
I'm actually working on an API myself that will render pretty histograms (line graphs), and hopefully pie charts down the road. It's going to be an open source project. I decided to make my own API when I looked at some others out there who were charging an arm and a leg for theirs. Chart Builder for example, it's like $6K for their java based API <choke>.
So if you're interested, or anyone else is, shoot me an email and I'll let you know when the beta is ready. [email protected]
-Derek -
How to get Line Number in Purchase Order
Hi Experts
I want to get Line Number of Matrix of Purchase Order. How I get it ?
I want to compare Matrix Line Number with Line Number of POR1 in DB.
Please Help me.
Hepil DoshiHi Hepil,
Linenum in Matrix "38" is Columns.Item("110").Value
SBO application doesnot show it, but you can get the linenum from that column.
You can test by getting the column title. omatrix.columns.item("110").Title
Hope it helps.
Regards
Edy -
Getting the default pie chart colors
Hello,
I have a pie and a bar chart that display the same
information... Pie charts colors are filled automatically, and I
would like to use those colors for my bar chart as well... is there
any way to get those colors?
Tnanks.I ran into this issue myself and figured it out here:
Can I access Flex's default Chart colors? Or can I access a Series' current color? -
How to plot line and bar chart in one graph
i have one graph, but in this graph i want to plot line or bar chart using radio button selection.
can i do that...You must have 2 data arrays or plots to get this. Make sure your plot legend is visible. Drag the plot legend vertical borders to view both plots. Select one of the plot to be bar plot (See the attachment)
Attachments:
BarPlots.PNG 14 KB -
How to draw a simple pie chart?
I want to draw a simple pie chart.
I was wondering whether there already exists a method to allow me to do that in SDK 1.4.2. I saw on the net a method getPieChart( ).
Do you know if its incorporated in SDK1.4.2 and how to draw the pie chart using this method. Can anybody guide me?
Thanks.Have a look in your demos folder in your SDK, for example:
C:\j2sdk1.4.2_04\demo\applets\GraphicsTest -
Hi all,
I'm a beginner in java and i'm investigate in a web project (website) which should display statistical charts. I did a beans to generate basic bar charts, but it's most difficult to build a pie chart. That's why i need help to put me on the right way of building a Piechart beans.
All kind of help will be precious
Thanks in advance.
STFThanks a lot for your reply.
But it shall works in a beans and this was set up only for applications or applet. Besides it seems (i'm really not sure but i have found lot of thread)that an applet can't be run into a jsp page that is searching data into db (thanks to sql query)
: there is a problem of buffer (tomcat can't generate the jsp page in the same time as it execute the applet).
Let me know if i'm wrong or not please ?
Regards
STF -
How to create Leader Lines for Pie Chart Labels
I like Numbers but the restrictions they force are sometime just too much.
Example: Labels
The restriction of only being able to move a label of a wedge on a parallel axis is ridiculous. Here Excel clearly out shines Numbers.
I want an option to add a leader to a "Value" label so I can move it away from an area that is too crowded or the space for it is limited.
Yes, I know I could just not turn Labels on in Numbers and then use a text box to place the value anywhere I wish and then draw in a leader to fit my needs. But that is no solution just a horrible work-around.
Come on Apple. You've started a nice product here but gee-whiz, golly-gee, it's hard to adopt your products as MS replacements when so many basic features are missing.AlbertEinstein,
And I don't understand why you are even posting here. What in your reply was useful to my issue? Seriously, if you're here on this board just to spout opinions, might I suggest you take up blogging.
As for me, I'm here to try to find an answer to my problem. If you're knowledgable and know that it can't be done then just saying so the way Badunit did. It wasn't the answer I was looking for but at least he was trying to be constructive.
OK, so to your point. You've been using spreadsheets since Visicalc, good for you. My issue isn't with the spreadsheet part of Numbes, but rather with the charting technology.
Well I was a draftsperson when all there was, was boards and T-Squares. And a common rule is if your information is too close, overlaps, etc to be understood then you use a leader to move it to an area where it is not so cluttered.
Your issues with OpenOffice and MS Office I can't address because I'm not interested in either of those products within this thread.
So please if you have a suggestion as to how to solve my issue then I welcome your comments. But if you're here just to "complain" about others complaining I can just ask, what's your point? -
How to get line out on Ultrabook XPS 12
I need to connect my speaker preamplifier to the XPS 12, but do not see a line out selection from the headphone port on the computer. How to I get access to line out?
Hello. On all Dell laptops the headphone jack doubles as the line out.
trvlnw
connect my speaker preamplifier to the XPS 12
Not sure what you are trying to do. If you need to get a line level signal into the laptop, there is no line-in port so you would have to get a usb audio interface with a line-in jack. But use the headphone jack to get a line level signal out of the laptop.
Maybe you are looking for
-
I have been using firefox and having no problem until yesterday when trying to print various item on web sites I am getting communication errors with my printer. I can print from word perfect, Internet explorer, etc. It is not a printer problem but a
-
Setting a proper domain name and adding hosts for quick name resolution
I have 3 other computers in my house. Two run linux at this time. I want to do 2 things. Right now my machine says Steve.local for its hostname right? I want to change that so it reads Steve.mydomain.net. Am I correct that I need to sudo /etc/hostcon
-
Help. I lose connection after standy-by
Hello, I am Adriano, from Italy. Please, I have an iPad connected with D-link G624T (used as router). The connection is protected by password, with dynamic Ip and no Dhcp specifications. It runs everytime I switch on, but if it rests in stand-by and
-
Can I plug an audio video cable into the headphone jack of my curve and plug red yellow white rca hookup to my tv monitor like an ipod video out?
-
I have the education CC and it keeps asking me about my serial
Even thought I have already paid two moth for my education account for the curative cloud I can not use any of the programs because it tells me to register the products. After I have signed in with my Adobe ID it requires a serial number which I do n