How to get my data of my hp 2230s which freezes when AC is connected (battery can't be charged)
Hi people!
My laptop(HP 2230s) will only boot when AC is connected(battery is dead and will not charge when AC is connected and laptop not powered on)
In bios the laptop has got no problems @ all but when windows vista starts to boot either save mode or not it freezes!
The weird thing is than when i disconnect the AC for a while it continues booting. (battery is propably charged a bit) But i can only do this for 2 sec @ MAX before battery dies. I can boot windows by connecting and disconnecting the AC continually.... But thats idiotic, the battery does not charge more than enhough for a few secconds (i guess it only charges when it is still in bios.) And with AC connected windows is frozen completely.
Thats the story. I asume it's not the AC/PS because it works fine in bios/before OS starts or begins to boot.
The laptop has got some fancy increadibly user unfriendly interface which allows you to use your mouse... Anyway i can run several system diagnostics. Most of them freeze when they are checking Memory. sometimes at 17 % some times 47%.
But what is most intresting is that the HDD check, runs and completes and says that it failed. (without explaination)
Whats the best course of action?
I want to try to instal an other OS, but i would really apreciate it if i can BACK up my files or somehow get them on an Exteral HDD.
Many thanks!
Hi,
Here is a little update:
first of all i tried to boot with out battery connected. Same story: In bios it's fine.
When OS BOOTS with system restore it keeps hanging @ the screen where it searches for errors. At that point i could still cancel and reboot to start the normal way.
But when OC just starts loading it freezes up.
So my best guess is an HDD problem, either drivers or a total hdd failure.
In bios i tried an diagnostic test for the HDD, it gave the following message after completing.
"Hard disk test failed
Test 2 (comprehensive) ... error: Read failure"
My main question still is how to restore my data!?
Similar Messages
-
How to get the data by excluding the columns which are having null values
I have a table with 10 columns , 3 columns are having all null values . I want to retrive the data by excluding these 3 columns. That means output table should contain only 7 columns .
Can u give a query on this?
Thanks,
Maheshselect <list of column with not null values>
from table_nameThat is you need to specify the column name. -
Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
PatralekhaHi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha -
How to get changed data in ALV in Web Dynpro for ABAP
METHOD on_data_check .
DATA:
node_spfli TYPE REF TO if_wd_context_node,
node_sflight TYPE REF TO if_wd_context_node,
itab_sflight2 TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
IMPORTING
table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AMHi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
lr_table_settings->set_data_check(
IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
lr_table_settings->set_data_check( IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values. -
How to get all data from nokia to i5s
how to get all data from nokia E71 to i5s???
if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.
-
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).
Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
strtab
USING
'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
USING ittab TYPE any.
DATA:
h_zaehler TYPE i,
line_str TYPE string,
l_tabellenname(10) TYPE c,
l_arbeitsbereichsname(10) TYPE c,
h_string TYPE string,
h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
<l_arbeits> TYPE ANY,
<feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
CLEAR: h_zaehler, line_str.
line_str = ittab.
DO.
ADD 1 TO h_zaehler.
ASSIGN COMPONENT h_zaehler OF
STRUCTURE <l_arbeits> TO <feldzeiger>.
IF sy-subrc <> 0. EXIT. ENDIF.
WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
h_string = h_char.
CONCATENATE line_str separator h_string INTO line_str.
ENDDO.
APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
How to get the date of first day of a week for a given date
Hi gurus
can any one say me how to get the date of first day(date of Sunday) of a week for a given date in a BW transformations. For example for 02/23/2012 in source i need to get 02/19/2012(Sunday`s date) date in the result. I can get that start date of a week using BWSO_DATE_GET_FIRST_WEEKDAY function module. But this function module retrieves me the start date as weeks monday(02/20/2012) date. But i need sundays(02/19/2012) date as the start date. So it would be really great if anyone sends me the solution.
Thanks
RavHi,
The simplest way would be to subtract 1 from the date date which you are already getting in transformation routine, but instead of doing that subtraction manually which might need bit of errort, you can simply use another FM to subtract 1 from given date.
RP_CALC_DATE_IN_INTERVAL
Regards,
Durgesh. -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to get the date for the first monday of each month
Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AMUse IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
select add_months(date '2013-1-1',level-1) dt
from dual
connect by level <= 12
select dt first_of_the_month,
trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY. -
How to get the Date in a particular format?
Hi,
How to get the Date in the below format? I will be passing the year in my method..
2/10/2003 9:46:52 PM
D/M/YYYY H:M:S A
public Date getDate (String year) {
Here i want to get the Date in this format
2/10/<Passed Year> 9:46:52 PM
ThanksThis is my code
public static Date getCalendar(Calendar calendar,int getYear) {
String formatted_date="";
int year = getYear;
int month = calendar.get(Calendar.MONTH+1);
int day = calendar.get(Calendar.DATE);
int hour = calendar.get(Calendar.HOUR);
int min = calendar.get(Calendar.MINUTE);
int sec = calendar.get(Calendar.SECOND);
int am_pm =calendar.get(Calendar.AM_PM);
formatted_date = month+"/"+day+"/"+year+" "+hour+":"+min+":"+sec+" PM";
System.out.println("formatted_date is "+formatted_date);
o/p : formatted_date is 1/4/2006 1:44:21 PM
SimpleDateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy");
// DateFormat dateFormat =DateFormat.getDateTimeInstance(DateFormat.SHORT, DateFormat.SHORT);
Date passdate = new Date();
try {
passdate = dateFormat.parse(formatted_date);
} catch (ParseException e) {
System.out.println("Invalid Date Parser Exception "+e.getLocalizedMessage()+"DateFormat is "+dateFormat);
System.out.println("The Date inside the function is "+passdate+"and the year passed is "+year);
o/p : The Date inside the function is Sat Apr 01 00:00:00 IST 2006and the year passed is 2006
return passdate;
Expected O/P is 3/1/2006 1:44:12 PM
} -
How to get javabean data in Servlets.( JavaBean -- Servlet(Controller)
how to get javabean data in Servlets.
1) I am using name ,password in Jsp(View )
2) when I submit this Bean will be called and Setter methods will be called .
3) In ServletController (controller) I want to get data of javabean.
In this I have to do validation of user.
I want to pass the javabean obj as like -->
request.getAttribute("beanObj");
My intention is to get all the poperties in javabean by passing bean id
or beanobj ,
Is there any way to get all the data using bean id or beanObj.
Plz Reply,Now in the Servlet we can get the same bean by this code:
PageContext pageContext = JspFactoryImpl.getDefaultFactory().getPageContext(this, request, response, null, true, 8192, true);
UserBean userbean = (UserBean)pageContext.getAttribute("userbean", PageContext.SESSION_SCOPE);
String userid = userbean.getUsername();
For this code to work it is needed to import 2 files:
import org.apache.jasper.runtime.JspFactoryImpl;
import javax.servlet.jsp.PageContext;
The JspFactoryImpl is in jasper-runtime.jar file provided in tomcat dir.It seems to me that you are exactly knowing what you are doing :-(
You can get a Bean stored in a Session by
request.getSession().getAttribute("userbean");
In the login.jsp page for example we have the code
<jsp:useBean id="userbean" scope="session"class="com.newproj.UserBean" />
<jsp:setProperty name="userbean" property="*" />the jsp:setProperty is not called when you click on the submit button
if fills the bean with the request values from the previous request.
andi
Maybe you are looking for
-
How to display the steps of a sort algorithm??
I'm having a lot of trouble trying to display the results of applying a merge sort to a set of 10 integers. The problem is not that I can't see anything on the text area within the applet, the problem is that I am getting a lot of repetitions and dup
-
i rented a movie from itunes. i was on a plane when i tried to access it...but got an error message saying "cannot access itunes store". i had a wifi connection but had to purchase internet to watch the movie on the plane. never had this problem w
-
E61i (older smartphone) and using WIFI/WLAN
Greetings -- At home, I know people who have a WLAN network without password. I told the guy I got this smartphone and he said I could use his internet. So far so good, when im close to my window downstrairs, im able to read my mails and go on websit
-
I have over 85,000 photos using photoshop elements 10, on an windows 7 computer. I would like to transfer them to my new iMac. I would like to install photoshop 12 on my iMac. How can I get my photos, tags, etc. on to my iMac?
-
How do I select from multiple schema's
How do I select from multiple schema's Tried: SELECT * FROM schema1.table1, schema2.table2 WHERE schema1.table1.column1 = schema2.table2.column2; Errored......