How to get nat type 1 with airport extreme and ps3?

I use airport extreme as my default router. I have my ps3 connected to a separate airport in a different room. I can only get nat type 2 and want to get nat type 1 as I can barely connect to any hosts online.

NAT type 1 is when you connect your PS3 directly to your modem with no router in between. The problem with this is that there will be no way to share your internet connections with other devices. NAT type 2 is where you have a router in between your modem and your PS3, and NAT type 3 is where you have some or all needed ports blocked which is where you would have issues.
NAT type 2 is a correct way for your PS3 to work, and your wireless connection strength may be the reason for connection issues.

Similar Messages

How to set NAT Type in Airport Express for PS3

I just replaced my existing WiFi router with a Airport Express, using the same log in information, and all other devices includin iPhone and laptop can get on line w/o problem, but my PS3 can not seems to log in for on-line game, and when I check the internet connection settings, it show NAT type failed due to timeout error. I have read some articles about the need to change NAT Type from 3 to 2 or something like that, how can not find in Airport Utilities on how to open up NAT to change its type? anyone can help? Appreciate.

Unfortunately there are no specific NAT settings on the AirPort routers to change the NAT type. On the AirPorts you either have NAT enabled or disabled. Other options would be to use either a DMZ or open specific ports on the AirPort's NAT firewall to allow your PS3 to gain full access to PS3's on-line gaming service.

Double NAT Error with Airport Extreme and Airport Express

I have an Airport Extreme 802.11n base station which is connected to my DSL Modem/ Router via Ethernet. I have a MacPro which does not have an airport card installed so I bought an Airport Express 802.11n - which is connected to my MacPro via ethernet - and thus provides my MacPro with internet access.
Originally I had the APExtreme and the APExpress set up in a WDS - all worked well - my other wifi equipped macs and devices in the house connected to the network with no problem, but I did notice that the maximum throughput I was getting was 802.11g speeds - this is of course due to the overhead of the WDS.
I originally purchased these 802.11n devices because I wanted the higher throughput - so I decided to terminate the WDS and just have the APExpress (attached to my MacPro) "join" the wireless network instead of extending it - which works and I am enjoying the 802.11n speed.
So, I just upgraded a couple of my Macs to 10.6.2 and was going to start using "Back to My Mac" and I got the error that there is a double NAT address problem and that "Back to My Mac" won't work until this is resolved.
I know that going back to a WDS will resolve the double NAT problem - but I don't want to take the performance hit that goes with the WDS.
So, short of buying an Airport card for my MacPro (which would eliminate the need of the APExpress)
Is there any other way to resolve this double NAT problem besides WDS?
Thanks for any advice.

First of all thanks for your quick reply!
Connecting my MacPro to the Airport Extreme would be a serious pain as the DSL Modem and APExtreme are upstairs near the only connection point in the building to a phone line - and my MacPro is downstairs.
I suppose I could dig out a very long ethernet cable to perform the test. But before I jump through that hoop - please explain to me what you are trying to get at - in other words - what does it mean if this resolves the double nat error - and what does it mean if it does not?

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

Amazon Q&A - E3200 - Default Nat Type for xbox 360 and ps3

Date: Sep 5, 2012 4:08:21 PM PDT
Linksys E3200 High-Performance Simultaneous Dual-Band Wireless-N Router
the nat type for xbox 360 and ps3, what is it when you set the router up out of the box? are the nat types open moderate or strict

Hi there. It actually depends if the gaming consoles ports are not blocked by your ISP. Moderate NAT type limits your connection playing online games, Strict does not allow you any connection at all while Open allows you to play with everyone online. Have you had a router before with Open NAT on the gaming consoles? Try to check without the router by going directly to the modem and see if your NAT type is open or strict or moderate. If ever modem is fine and it is the router not working right you can port forward ports on the router. I found these usual ports online, for XBOX live:TCP and UDP ports: 80-88, 3074-3074, 4267-4269. For PS380, 443, 3478, 3479, 3480, 5223, 8080 and UDP: 3478, 3479.
Setting up port range forwarding on Linksys wireless-N routers and gateways
Resolving NAT type issues with gaming consoles through a Linksys router
PS3
Setting up an Xbox 360® behind a Linksys Wireless-N router

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Issues with Airport Extreme/Express/PS3 network

I have searched and searched and cannot find the answer to my problem. In my house I have an Airport Extreme, a Linksys switch, and an Airport Express all creating my wireless/ethernet network in the house. Since day one, my PS3 joined our network and I have been able to get online, no problems. Recently though I have decided to attempt to get the horribly difficult NAT type 2 with no success.
Right not I have the Extreme acting as the WDS main and the Express (which delivers perfect connection to the PS3) acting as a WDS remote in Bridge mode. The Extreme is sharing a public IP and I have a DHCP reservation for my PS3 (using the default 10.0.1.253 IP) along with all the PS3 necessary ports forwarded. I have also set up the Extreme to set my PS3 as the default NAT host.
My problem is that I get a "Conflicting DHCP Range" error. I also get a lot of warning messages every now and then saying "10.0.1.x is already in use by *MAC address* 10.0.1.1". I still can get on the internet with my computers and PS3 but I have noticed that signing onto PS network works very rarely.
I absolutely cannot make sense of this. I also don't have my NAT 2 so can anyone help me.

Is the PS3 connected to the express over WiFi or plugged into the ethernet port on the express or both?
You should not need forward ports and set the default NAT host. Just setting the default NAT host will forward all traffic that is not sent to another host to the PS3. I would recommend forwarding ports instead of using default host for security reasons.
You could also try setting static IP info in the PS3.

Help With Airport Extreme and External Hard Drive

I just purchased the Airport Extreme and I couldn't have been happier. I have attached my western digital external hard drive, but I have run into a slight problem/dilemma which I'm hoping someone who is apple savvy can help me out.
I live in a house with a couple of other guys and so I put all of my movies and media onto the hard drive so we can stream it throughout the house, but how do I make sure that someone won't accidently delete the files (The copies on the hard drive are the only ones I have)? I have tried to right click "get info" and change the sharing & permissions properties on the folders that I don't want deleted, but it doesn't save the changes or even allow me to select another option other than Read & Write. I formated the hard drive with the disk utility before I connected it to the AirPort so I know that it has nothing to do with the format of the drive. I also tried to create different user accounts for each roomate so that they could view the files (Read Only) but I get an error message explaining that if I continue, the contents of the hard drive will not be accessible. I'm sure its something simple but I'm obviously missing it.
Thanks!

Airport Utility under Disks/File Sharing has guest access rights.

How to do wireless printing with aiport extreme and HP c4280

I admit it... I'm a dunce. I usually just plug the usb for the hp c4280 printer right into my macbook pro, but I want to finally be able to use it wirelessly. I have an airport extreme, and i know there is a usb port... how do I add the printer so i can print wirelessly?
obviously i can't just plug it in and print (right? becuase i tried and no go on the printing).
someone please take pity on me!
thanks!

Download the install Bonjour Print Services for Windows v2.0.2
Run the program. Hopefully, your printer will be recognized.
If it is, "install" the printer and try to print.
Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Trouble with airport extreme and express

Hey all. I recently bought a new airport extreme and I'm now having problems setting up a network with the airport express. the airport express that we have is connected to a very old G3 iMac because it doesn't have an airport card and is upstairs. I have so far managed to set up the airport extreme so my G4 iBook and my MacBook Pro are both connected via wireless. The trouble seems to be that I can't get the next step set up as i'm not very experienced with networks and I can't get the express to establish a connection with the extreme. i hope somebody could help me sort out the next step. On a side note, this new airport extreme doesn't allow my xbox 360 to connect to it and i wondered if there is any way I can get it to connect again via wireless, either by changing a setting or the security?
Any help and feedback would be greatly appreciated,
Thanks.

applefan08, Welcome to the discussion area!
To continue to use the AirPort Express (AX) to give Internet access to the iMac G3, you will need to configure the 2 devices to use WDS to wirelessly connect. The instructions start on Page 41 in "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).

Problem with Airport extreme and Time machine

I recently purchased a 320gig external hard drive for Time machine. I connected it to my Airport extreme but it is not being recognized for some unknown reason. If I directly connect it to my iMac it works perfectly. I've updated with the latest firmware and it should work via USB with Airport extreme. Any suggestions why it is not working?

angelop wrote:
I have used the following for about two years.
-MBP, Airport Extreme, External HD (1TB) for my time machine.
You probably know, that's "iffy" and +*not supported by Apple.+* See the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of this forum.
To get around this issue, I have switched off the Time Machine, and am only turning on once a week or so, to grab any changes or additions I've made. I've been doing this for about 6 months now with no problems.
Now whenever I do this, (It should only be backing up an album or two from iTunes,) it tries to back up my whole system again. EVERY TIME. It did not do this before.
If you go too long between backups, Time Machine will do a new, full backup. And once it decides to do that, it will keep trying until it succeeds. There are some other possibilities as well. See #D2 in the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of the +Time Machine+ forum.
If none of those seem to explain it, see #A1 there; download the TM Buddy widget, copy and post the messages here.
Why are you only backing-up once a week? Time Machine was designed to back up changes hourly, as long as your Mac is awake and the TC is in range. It will protect you best that way, and unless there's a problem, those backups will usually be very quick.
But if you're only going to back up once a week or so, then Time Machine is not the best app for you. See Kappy's post on Basic Backup, complete with links to the web sites of each product.

Issue with Airport Extreme and 100mbps connection

Hi,
I have just upgraded my connection to 100mbps. Using a ARRIS TM 502G cable modem and the Airport Extreme I am able to get the 100mbps connection via either ethernet or wifi on my main MacBook Pro. However, the Mac Mini in the loungeroom (10 metres away from the Airport Extreme) is only getting speeds of around 25mbps.
Does anyone know why this might be or what I can do to resolve it?
Thanks,
Matt

The Mini was connecting at 20 - 25mbps via wifi.
The Macbook Pro was connecting at 80 - 90mbps via wifi (when in same room as Airport Extreme) and getting anywhere from 80 to 140mbps via a wired connection.
I've moved the Airport Extreme so it has the best "line of sight" to the Mini, and also disconnected a cordless phone I had in the room which was interfering with the signal.
After these changes I'm able to get speeds of 30 - 45mbps on the mini and similar speeds on my macbook if I move it next to the mini. It looks as though that's the best I'm going to be able to get without hard wiring the mini - which is disappointing ... unless of course you clever people have any other ideas?

Trouble with Airport Extreme and Time Capsule

Just got a new 2TB time capsule and added it to my network (existing Airport Express and Airport Extreme). All devices are hard-wire back-hauled to Linksys router. Set up was straight forward with no issues and initiated a time capsule back up without a problem. Within hours I noticed that the TC was no longer reachable in Finder.. Opening the AirPort utility, I saw that both the Extreme and the TC were "lost". Still had (green) internet connectivity, but the base stations were showing as off-line in the Airport utility.
Tried rebooting and checking from multiple other devices and no luck. Occasionally will find them both on-line in Airport utility, but seem to lose one (usually TC) after a short period. All are running the most up to date version of firmware (7.7.3). Prior to installing the TC, I had experienced 0 issues with Airport Express and Extreme.
Has anyone else seen similar issues? Are there settings that need to be accounted for in some way to avoid these frustrating "lost devices"?
thanks

Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ?

Cisco router RVS4000 with Airport extrem and Time capsule.

Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
Airport extreme and Time capsule is conected via ETH.
Any idea ?
Thaks
B.

If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
see http://support.apple.com/kb/HT4260

How to get nat type 1 with airport extreme and ps3?

Similar Messages

Maybe you are looking for