How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE      
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE      
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

Similar Messages

  • HT5622 I'm a student exchange from france in USA, I have an apple ID from france and a bank count in france but i want access to the apple store US because I'm here for the year and some app can be interesting for me (like my gym club app) how can i do ?

    I'm a student exchange from france in USA, I have an apple ID from france and a bank count in france but i want access to the apple store US because I'm here for the year and some app can be interesting for me (like my gym club app) how can i do ?

    you cant.  you need a US bank account.

  • I have done my de authorisation limit for the year, and need to use it again, how do it?\

    i have done my de authorisation limit for the year, and need to use it again, how do i?

    Contact itunes support and ask if they will allow this

  • I am running a Mac OSX Snow Leopard. Joined Creative Cloud for the year and now it won't allow me to

    I am running a Mac OSX Snow Leopard. Joined Creative Cloud for the year and now it won't allow me to install the app due to administrator rights. Does anyone know how to fix this ?  I have done all the necessary logging already.

    Duplicate post http://forums.adobe.com/thread/1382476

  • I am an exchange student for the year and I would like to by an iphone that i can use in France also, so I need an unlocked one but i don't want to pay to much for it... What should I do?

    I am an exchange student for the year and I would like to by an iphone that i can use in France also, so I need an unlocked one but i don't want to pay to much for it... What should I do?

    What do you mean what should you do?  Just because you don't want to pay too much for a phone, doesn't make the price any cheaper.  If you can't afford the price of an unlocked phone, then you don't, or can't, buy one.

  • How do I disable transparency for the menubar and addressbar in firefox?

    How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
    It is difficult to read.
    Edit:
    Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
    I know what Aero is and how to turn it off.
    The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.

    If you are up to tweaking some CSS code in a style see
    "Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
    It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars.

  • HOW TO CREATE SEVERAL folder for the generation and READING FILE

    HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
    please give an example to create 3 folders or directories ...
    I appreciate your attention ...
    Reynel Martinez Salazar

    I hope this link help you.
    [http://www.adp-gmbh.ch/ora/sql/create_directory.html]
    create or replace directory exp_dir as '/tmp';
    grant read, write on directory exp_dir to eygle;
    SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
    Directory created.
    SQL> declare
      2    fhandle utl_file.file_type;
      3  begin
      4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
      5    utl_file.put_line(fhandle , 'eygle test write one');
      6    utl_file.put_line(fhandle , 'eygle test write two');
      7    utl_file.fclose(fhandle);
      8  end;
      9  /
    PL/SQL procedure successfully completed.
    SQL> !
    [[email protected] 9.2.0]$ more /opt/oracle/utl_file/example.txt
    eygle test write one
    eygle test write two
    [[email protected] 9.2.0]$
    SQL> declare
      2    fhandle   utl_file.file_type;
      3    fp_buffer varchar2(4000);
      4  begin
      5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
      6 
      7    utl_file.get_line (fhandle , fp_buffer );
      8    dbms_output.put_line(fp_buffer );
      9    utl_file.get_line (fhandle , fp_buffer );
    10    dbms_output.put_line(fp_buffer );
    11    utl_file.fclose(fhandle);
    12  end;
    13  /
    eygle test write one
    eygle test write two
    PL/SQL procedure successfully completed.
    SQL> select * from dba_directories;
    OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
    SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
    SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
    SYS                            EXP_DIR                        /opt/oracle/utl_file
    SQL> drop directory exp_dir;
    Directory dropped
    SQL> select * from dba_directories;
    OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
    SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
    SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
    Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

  • How to find compensation data for the year

    Dear All,
    Scenario:
    A company wants to know the comepnsation data for financial year 2009-2010.
    Problem: I couldnot find a single report which can provide the compensation of an employee for the year.
    We are trying to build a report however needs input if anyone has done that:
    Table which stores this data is PS_COMPENSATION.
    Problem is : it stores data in effective date.
    How to then convert it into a year -April 2010 to March 2011
    For example: cases
    a. existing employee: whose effective comp data will be less than April 2010
    - Plus, there are pay rate changes between April 2010 to march 2011. (Pay rate change can happen on any date of the month)
    - How can I add them to find the Compensation as per comp page from 1st April to 31st march 2011

    I'm afraid what you're looking for is not likely to be a trivial task. If you have all of the modules required for the "Report Total Compensation" product, then you should take a look at the associated PeopleBook. I think you will have to be on HRMS 9.0 at a minimum, and using Payroll for North America and Benefits Administration.
    To create a custom solution, you may have to consider a variety of other factors such job status--leave, terminated, terminated with pay, etc.--hourly vs. salaried, part time vs. full time, multi-job, variable compensation. It will depend entirely on the specific features that are being used at your site.
    If you provide a very detailed example of the output you are looking for with sample data, someone might be willing to offer a solution.
    Regards,
    Bob

  • Sql query to get Thursday (Date) for the year 2014

    Hello All,
    I want to get the date for all the Thursdays in the year 2014. How can I achieve this using SQL query? Can anybody give me a hand with this? Thanks.
    Amol

    Hi,
    Check if this can help you
    DECLARE @counter INT
    DECLARE @Date Date
    SELECT @counter = 0
    Select @Date = '20131226'
    WHILE @counter <= 52
    BEGIN
    select Thursday = convert(varchar(10),DATEADD(WEEK,1, @Date),120)
    SELECT @counter = @counter + 1
    Select @Date = DATEADD(WEEK,1, @Date)
    END
    Regards
    Prasad Tandel
    Please dont forget to mark as answer if this helps you :)

  • I thought I was getting more GBs for my ipad and it ended up the Icloud, I purchased $20.00 annually only to find out this was not what I needed and for sure I do not want it annually.  How can I get a refund?

    I thought I was getting more GBs for my ipad so I could download from the APP store and I ended up getting for $20.00 annually more storage for my ICLOUD; this is not what I wanted, how do I get a refund?

    If you're in the U.S., call 1-800-MYAPPLE.

  • In BAM, how to get activity ID for the running instance in the orchestration.

    I am trying to add document reference URL to the active instance in the orchestration for the activity which is already started.
    Please let me know how to get such activity ID.
    Thanks
    Jagadeesh 
    Jagadeesh RS

    Are you using TPE to set up the Activity Tracking or BAM API. If you are using TPE then identify what has been set as the Activity Id in the BTT file. If the Message Id is used then use "BTS.InterchangeID" [refer
    http://msdn.microsoft.com/en-us/library/aa562116.aspx] on the received message to get the Activity Id.
    If however you've mapped the Activity Id in BTT to the InstanceId then use
    "Microsoft.XLANGs.Core.Service.RootService.InstanceId"
    to get the activity id.
    Regards.

  • How to get YTD sale for Last year In OBIEE 11g

    Hi All,
    I have a fact table for Sale_Amt with doc_date wise details. It is connected to Simple time_dimension table based on Date_ID(Number) field. The time_DIm Hierarchy is set on Year, Quarter, Month fields of the time_dimension table.
    One of my reporting requirement is to show show YTD sales and Last Years YTD sales.
    e.g, If user select 23 Jul 2013 as the date parameter, I need to show 1-Apr-2013 till 23 Jul 2013 Sales in YTD column and 1-Apr-2012 till 23 Jul 2012 Sales in Year_Ago_YTD column. I am able to get YTD sales but unable to derive at Year_Ago_YTD sales figures.
    Finacial Year Start from 1st April till 31 March.
    Any Help on this will be appriciated.
    Thanks.
    Narendra Shetty.

    Narendra,
        You can make use of the below two functions to get the year ago dates. You can replace current_date with a presentation variable that stores the date parameter that user selected.
    TimestampAdd(SQL_TSI_YEAR,-1,TIMESTAMPADD(SQL_TSI_MONTH, 3,TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) - It will display previous year's first day of fiscal year (since I passed current_date, it gives you 1st april 2012)
    and
    TimestampAdd(SQL_TSI_YEAR,-1,current_date) - Same Day Last year
    Pls mark correct/helpful.

  • How to get last day of the year

    Hi All ,
    Thanks in advance ...
    How will I get the last day of the year as I am passing date at run time .
    I can manage to get first day of year by
    SELECT TRUNC(SYSDATE,'YEAR') AS FDAY_YEAR
    from dual
    Thanks in advance
    Regards
    Sachin

      1*  select ADD_MONTHS(trunc(sysdate,'yyyy'),12)-1 dd from dual
    SQL> /
    DD
    31-DEC-2010

  • How to get stop script for the server

    Hello everyone,
    I installed weblogic server8.1 on my Linux machine and used $WL_HOME/server/bin/startWLS.sh
    to create a new domain and server. But I did not find any stop script(like stopWLS.sh)
    which can stop myserver. How can I get it?
    Thanks for your helps.
    Iris

    which can stop myserver. How can I get it?Here's an etc/rc3.d script I use for my RH9 server. You'll notice there is
    a line in there for stop(), you can run that manually if you so choose, or
    you can use it via the xinetd (I think that's what it's called?). Good luck.
    # processname: weblogic
    # pidfile: /var/run/weblogic.pid
    PIDFILE=/var/run/weblogic.pid
    # Source function library
    . /etc/init.d/functions
    #check to see if we can write to config.xml...so non-root uses stop here
    [ -w /Domain/config.xml ] || exit 0
    #setup the environment for the java commands
    . /bea/weblogic81/server/bin/setWLSEnv.sh
    cd /Domain
    start(){
    echo "Starting WebLogic for Domain"
    cd /Domain
    daemon ./startWebLogic.sh &
    echo $! > $PIDFILE
    RETVAL=$?
    echo "WebLogic Server started."
    return $RETVAL
    stop(){
    echo "Stopping WebLogic for Domain"
    rm -f $PIDFILE
    java weblogic.Admin -url localhost:80 FORCESHUTDOWN
    status(){
    echo "Getting Weblogic status for Domain"
    java weblogic.Admin -url localhost:80 GETSTATE
    restart(){
    echo -n "Restarting WebLogic for Domain"
    stop
    start
    # See how we were called.
    case "$1" in
    start)
    start
    stop)
    stop
    restart|reload)
    stop
    start
    status)
    status
    echo $"usage: $0 {start|stop|status|restart|reload}"
    exit 1
    esac
    exit $RETVAL

  • How to get check number for the employee's paycheck

    Hello
    Anyone can advise on how to get the check number for an employee's pacheck
    I got employee first name,last name,GROSS salary,Tax Info,and NET salary.I need the CHECK NUMBER.
    please advise
    thanks
    kp
    Edited by: user8612301 on Dec 16, 2010 1:26 PM

    Hi,
    Or are you looking for this:
    SELECT serial_number, paaf.assignment_number
    FROM pay_assignment_actions paa, per_all_assignments_f paaf
    WHERE action_status = 'C'
    AND paaf.assignment_id = paa.assignment_id
    AND serial_number IS NOT NULL
    AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
    - Viky
    Edited by: Viky on Dec 17, 2010 11:42 AM

Maybe you are looking for

  • Java.sql.SQLException: Statement cancelled, probably by transaction timing

    Hi all, I have a problem with transaction handling over 2 applications. I have 2 EAR files (*A.ear* and B.ear) which are deployed on a WLS 12.1. The WLS contains a XA datasource which is connected to a Oracle XE database. Both applications are using

  • How to get the contents associated with a component.

    How to get the contents associated with a component. Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event. By Contents i mean, whatever things we get after firing the eve

  • Video Playing Issues

    When playing a video, it was family guy, the screen pauses for a bit, starts again but without sound. I then have to rewind and start again. It does this quite often, and it plays perfectly on itunes. 60gb btw   Windows XP  

  • Please Help!! I am unable to view my iPhoto Library

    I  have just copied my Iphoto Library to an External Hard Drive and since carrying this out I am unable to view my Photos and Videos through IPhoto 08...just have a blank black screen.  Please Help

  • Reactivate email sub account

    I have a sub account which I deactivated some time ago and now wish to activate but there is no option to do this in my BT. I have spoken to a BT person who seemed to think there should be a dectivate button in "manage  email accounts". This person p