How to get patch CR095687 required for WebLogic Adapters

The release notes of WebLogic Adapters specify to ensure that patch CR095687 need
to be installed

There should be a link on the adapter download page -- at least there is for the
Clarify Adapter version 7.0.3 for WLI 7.0 for Windows NT/2000.
"Bhaskar" <[email protected]> wrote:
>
The release notes of WebLogic Adapters specify to ensure that patch CR095687
need
to be installed

Similar Messages

  • How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec

    Check Content:
    Verify all accounts require passwords.
    Run the DUMPSEC utility.
    Select "Dump Users as Table" from the "Report" menu.
    Select the following fields, and click "Add" for each entry:
    UserName
    SID
    PswdRequired
    AcctDisabled
    Groups
    If any accounts have "No" in the "PswdRequired" column, this is a finding.
    Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present.  It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

    Hi Malik,
    How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
    Please contact SystemTools Technical support to get more efficient support regarding this matter:
    http://www.systemtools.com/support.htm
    http://www.systemtools.com/toolboard/
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • How to get the document number for a ware house order.

    Hello gurus,
    how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
    Thanks in advance

    There are several options.  When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
    Depending on how your system is set up you may have gotten a Transfer Order automcatically.  In this case you can look at LT24 - Transfer Order for material.

  • HT204291 how do get the media icon for mac mirroring when running airplay on itunes?

    how do get the media icon for mac mirroring when running airplay

    Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 (or later)
    http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

  • How to get Patch bug995765

    Hi,everyone
    How I can get Patch bug 995765 for Oracle 8.1.6.1 on Linux?
    Without this patch,RMAN backup to disk will fail,If you know the way to get this patch,please mail to me:
    [email protected]
    Thanks

    I think its same right?

  • How to get the last error for while loop?

    How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

    What do you mean by "get" and "transfer"?
    If the shift register is not what you want, use a plan tunnel instead.
    Typically, programmers are interested in the first, not last, error.
    Can you show us your code so we have a better idea what you are trying to?
    LabVIEW Champion . Do more with less code and in less time .

  • How to get title templates library for CC?

    How to get title templates library for CC?  Do you have to download and install PP 6 to get them?

    Try here Library, title templates, template projects missing: Premiere Pro, After Effects, Encore

  • How to get balance sheet report for profit centers

    hi
    how to get balance sheet report for profit centers, is there any transcation code to get that report or i need to create a report painter report for this

    Hi,
    You can use T. code KE5Z for actual line items.
    More to this you can use program RFBILA10 (Use T. code SE38 and program RFBILA10) for complete blance sheet.
    The transaction is for special purpose ledger but this program RFBILA10 can be used for profit center balance also.
    In selection, you can give ledger name which is generally 8A for profit center ledger.
    Reg

  • I went to add my iPod to another computer and when I did it re-bought all of my music and I would like to know how to get my money back for it?

    I went to add my iPod to another computer and when I did it re-bought all of my music and I would like to know how to get my money back for it?
    anyonr know how I can get my money back????????

    Go to Settings>General>Reset>Erase all content and setting. Then re-setup the iPod with your account/media. To redownload iTunes purchases see:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to get 64 bit version for premiere elements 12

    How to get  64-bit version for Premier Elements 12 ? 
    I download from ADMISY site.
    Click on win 64 bit and download it.
    When I try to install ther is a error  this download version is not for 64 bit I have try many times but same result

    Hello
    I have been away some days
    ADMISY is a software partners for Adobe
    I running Win 7 Home Edition
    I have received a card with a code when I bought the program and the I
    download from ADMISY
    Sending serial and installation warning
    PhotoshopElements_12_WWEFDJ.7z
    PhotoshopElements_12_WWEFDJ
    PremiereElements_12_WWEFDJ_win32.7z
    PremiereElements_12_WWEFDJ_win32
    I can not find a 64 bit version of 32-bit or 64-bit version of downloads
    This is information I have
    Best regards
    Erling Magnusson
    2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
        How to get 64 bit version for premiere elements 12  created by A.T.
    Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7162950#7162950>

  • How to get the depreciation areas for an asset in particular period

    Hi frndz,
      how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
    Thanks and regards.
    Harisumanth.Ch

    Try table ANLB, then read ANLC.
    Regards.

  • How to get the version no. for service po?

    Hi,
    How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
    Regards,
    Rachel.

    Hiee,
    It is not like service PO does not have revision.
    REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
    MM->Purchasing->Version management -> External documents
    Here check for your doc type and purchase org version management is active.
    Regs,
    Appie

  • How to get count of rows for a table?

    Hi,
    How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
    Regards,
    Devashish

    Hi Devashish,
    WdContext.node<Your_node_name>().size() will give you the no: of rows.
    This should be the node that is bound to the table's datasource property.
    WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
    You can access an attribute of a particular row as
    WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
    Hope this helps,
    Best Regards,
    Nibu.
    Message was edited by: Nibu Wilson

  • How to get a organization name for a particular user using API's

    Hi alll,
    How to get a organization name for a particular user using API's

    You need to do something like this:
    SearchCriteria criteria = new SearchCriteria("User Login", "XELSYSADM", SearchCriteria.Operator.EQUAL);
                   UserManager usrService = oimClient.getService(UserManager.class);
                   Set<String> retAttrs = new HashSet<String>();
                   retAttrs.add(UserManagerConstants.AttributeName.USER_ORGANIZATION.getId());
                   List<oracle.iam.identity.usermgmt.vo.User> users = usrService.search(criteria, retAttrs, null);
                   System.out.println("ORG KEY :: " + users.get(0).getAttribute("act_key"));

Maybe you are looking for