How to get rid of automatically created server accounts in iCal and Mail?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidav

I suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264

Similar Messages

How to get rid of automatically created Mail and iCal accounts on client?

I have recently setup an OS X 10.6 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (now upgraded to 10.6.4).
The problem is that one of the OS X 10.6.4 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?

I have the same problem. Every time that I open iCal on the client a new account is created and an error message shown that I cannot login. I can delete the wrong account in the iCal preferences. However, as soon as I restart, the account and the error message are back.
How do I "unbind" and "rebind" a client? I searched the "Mac OS X Server
Open Directory Administration Version 10.6 Snow Leopard" but the only reference to "binding" seems to be in the context of Active Directory which I don't have.
Any help is greatly appreciated.

Hot to get rid of automatically created Mail and iCal accounts on client?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?

I have the same problem. Every time that I open iCal on the client a new account is created and an error message shown that I cannot login. I can delete the wrong account in the iCal preferences. However, as soon as I restart, the account and the error message are back.
How do I "unbind" and "rebind" a client? I searched the "Mac OS X Server
Open Directory Administration Version 10.6 Snow Leopard" but the only reference to "binding" seems to be in the context of Active Directory which I don't have.
Any help is greatly appreciated.

I have very thin, colored lines running vertical on my desktop monitor screen. I don't know where they come from or how to get rid of them. I started with one and now have three. Can anyone give me some insight about what to do in getting rid of them?

I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?

I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere.

How to get rid of automatic indenting of 1st line of paragraph?

I am somewhat new to this, have taken a RH8 course, but I'm baffled. When I generate any type of output, the first line in a paragraph is indented a wee bit. I am importing a FM 9 file (but don't believe the problem stems from FM; I have checked the paragraph tags). In my CSS, text-indent is set to 0.000pt. If I look at the HTML source, there are three non-breaking spaces that cause the indent I don't want. Anyone know at what point these get generated? They seem to just show up out of nowhere. Please tell me - what am I missing?

Hi, the only thing I can think of as the reason you are getting non-breaking spaces (i.e.  ) is if you have spaces in your FrameMaker paragraphs. Please check your source FrameMaker files and even do a search for three spaced by selecting Edit > Find/Change. Enter 3 spaces in the Find box by pressing the space bar three times. Once you find these and delete them, save the file and "update" your files in RoboHelp, this indent should be removed.
Please let me know if this works.
Sincerely,
RJ Jacquez
Adobe TCS Evangelist
on Twitter @rjacquez

Touch3G, ios 5.1.1, how to get rid of "reading List" in the bookmarks section and history file in reading list no longer works.

Since downloading 5.1.1, my Touch 3G has "Reading List" in the Bookmarks section and the "history" tab no longer shows anything.
How do I delete "reading list" in the bookmarks section? Very disappointed to have this pushed on me without warning. TIA....

Please can u answer it fast

How to get rid of variance of GL account?

Hi SAP Expert,
I have an issue with closing balance that has been uploaded as 15802305 instead of 12503000
How can I adjust the amount 3299305 as the figure (15802305) comes from Materiel Management?
Regards,
Krsnveni

Hi,
You will have to make the correction/Adjustment in Materials Management.
Kind regards

How do get rid of this webkit2webprocess file eating up memory and crashing my browser every time

This file is definitely bugging me I have tried everything but every time this file starts eating up memory and slowing down the computer isthere a solution for this we have the i5 coming out nowbut this has been constantly nagging and isee somany issues with so many people is apple doing anything about it???

Thank you for your assistance. It was a corrupted preference file and your post resolved my problem. I have had a number of problems with preference file under lion.

How to get rid of module snd_hda_codec_atihdmi?

I've got the audio card M-Audio Audiophile 24/96 and the graphics card ATI Radeon HD 3450. So I've got only one audio card, which was always sound card 0 and the default sound card and which shall remain sound card 0 and the default sound card. The graphics card doesn't have an HDMI interface.
Nevertheless I don't have sound anymore (without reconfiguring every audio software), because the module snd-hda-codec-atihdmi.ko is permanently, automatically loaded at boot time and put as sound card 0 and therefore the default sound card.
Putting !snd-hda-codec-atihdmi in the MODULES array of /etc/rc.conf doesn't help. And `rmmod snd-hda-codec-atihdmi` doesn't help either. Then it says, that this module is in use.
Is there a way, how to get rid of this - at least for me - annoying and senseless module?

bgc1954 wrote:One way to do this would be to compile your own kernel and only include support for your M-Audio sound card. That way the kernel can't drag in support for the atihdmi thingy. May be your only option if blacklisting and setting the order of your modules doesn't work.
I know this way, but I still hope, that there's another way.

How to get rid of the message Client submission probe stuck in the Exchange Server Queue?

We have Exchange 2013 in Hybrid with Office 365.
How to get rid of the message in the Exchange Server Queue?
Mounting the database fixed it.
Thanks!!!

Mounting the database fixed it.

I tried creating a new folder and quickly moving Newsstand into it, but Newsstand is grayed out, and could not be moved. Any other ideas how to get rid of it?

I tried creating a new folder and quickly move Newsstand into it, but it is grayed out and cannot be moved. Any other ideas how to get rid of it?

You cannot

How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP server

In 9iAS 9.0.2 Oracle HTTP Server (OHS) is pre-configured to assign requests to the Home OC4J instance via the URL-prefix "/j2ee"/
For example, the TEST servlet under OC4J would be passed through OHS using:
http://urmachine:urApachePort/j2ee/TEST
whereas in the standlone OC4J version, this URL works:
http://urmachine:urOC4JPort/TEST
How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP Server?

It is getting the url prefix from mod_oc4j.conf
under /ora9ias/Apache/Apache/conf
You can read more on this at
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a92173/confmods.htm#1008977
-Prasad

Can not get rid of cannot verify server identity pop up, how can i get rid of it for 3rd gerneration ipad?

how can I get rid of cannot verify server identity pop up on my new 3rd generation ipad?

A [http://www.google.com/search?q=Brookwood+Internist+Birmingham&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a Google search] shows the website, but it still doesn't load - it shows the Go-Daddy '''Want to buy this domain?''' page.
Using a DNS Lookup for that domain - http://68.178.232.100/ doesn't load that web site either. It shows '''This site is not currently available.'''
Might be a server problem where that website is hosted, a DNS problem, or an expired domain name ''(but when that happens the message is usually '''expired registration''')''.
Call your doctors office Monday morning and tell them that their website won't load. It's something that their webmaster needs to look into, along with their web hosting service ''(which I guess is Go-Daddy)''.

SAP hana Visualize Plan show Create Temp Index and it shows Unsupported Operator Order. Why the hana build temp index and how to get rid of it ?

When I see the Visualize Plan for SQLScript it show Create Temp Index at many Places.
It also shows unsupported operator order CS_JOIN over CS_AGGREGATION.
Why does hana create Temp Index and how to get rid of it.

Just browsing for some more information on this operation, and it just happened that my favorite VizPlan expert has chimed in here
I have a scenario where I am using a nested SQLScript based calc view. One view (child view) retrieves a relatively small data set, then the main CV takes that and joins with a bunch of other data from another schema.
When I started out, just the nested portion of (child calc view), takes roughly 800ms to return it's resultset, for which I was pleased. Now, when I added some other joins onto that dataset in the main CV, I am seeing my runtime spike to approximately 16 seconds, with 15 seconds being spent on a "Create Temp Index" process that only results in 12 rows (from what I can see).
Now the question becomes - since I have identified where 95+% of my runtime is being generated, how can I really pinpoint what operation is causing this? I was thinking the ID column (shown in the details) may offer some clues if one knew how to locate the details in a system table somewhere?
Otherwise, all I can see in the VizPlan is that YES there is a long running component, but I have no idea what it might be, therefore can't do anything about it
Regards,
Justin

How to get rid of No Value in Olap cube based SSRS report

hi there, I am trying to create a report based on SSAS cube. As you can see, some returns 0 while some does not return anything. This actually messed out the border style as well... Any idea on how to get rid of this?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi Cat_ca,
Are you using SQL Server Reporting Services 2000? Currently, we do not have SSRS 2000 test environment, and SQL Server 2000 was out of support since April 2013.
I have tested it on SSRS 2008 R2, everything works fine. It display nothing on the cell for the NULL value. Please refer to the screenshot below.
In your scenario, to avoid this issue you can use NonEmpty function in your query to remove the NULL values.
NonEmpty (MDX)
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
TechNet Community Support

How to get rid of automatically created server accounts in iCal and Mail?

Similar Messages

Maybe you are looking for