How to get rid of feedback in logic pro x!?
I am using Logic Pro X, and bought a Behringer small USB Audio Interface to record guitar through it's 1/4 input. However whenever I assign one of the amp configuration presets in Logic, I get crazy feedback. I didn't have this issue at home with my Mackie Onyx-i so I don't know what to do to solve the issue. Thank you!
Hi, Frank.
Check system preferences and see if your mac's internal speakers are selected.
If so, turn down the volume. I found that plugins like Amplitube or Guitar Rig feedback immediately if my internal speakers were selected instead of my audio interface. You should select the outputs of your audio interface
Hope this solves your problem
regards,
Scorpii
Similar Messages
-
How to get rid of malware on Mac Pro
I have a Mac Pro with the OS X Yosemite. My computer has malware on it. I keep getting popups and ads on my screen, whether I'm using Safari or Chrome. One of the popups says "Suspicious activity found on your computer, due to pop-up advertisement windows and invasive links. Please contact tech support at 1-866-215-6348." I want to know how to get rid of this malware. Thanks in advance.
Some are persistent. Force quit Safari again. Disconnect from the Internet by either turning off Wi-Fi in the System Preferences, or unplugging the Ethernet cable from your router/modem. Hold the Shift key and launch Safari again. If the same popup appears, you will be able to dismiss it and navigate away from the page, or close its tab. Reconnect to the Internet.
Though reading your initial post again, it's sounding more like JimmyCMPIT is correct since you're seeing ads in multiple browsers. It's just rare for one the ads that pops up to be like one of the tech support scams.
In which case, you can either follow Apple's manual instructions for removing adware, or use the free automated tool, AdwareMedic (as mentioned by, and linked to by Jimmy).
It should be noted that Apple's manual removal instructions are typically outdated. Sometimes a lot outdated. It depends on when Apple last updated their instructions page. If you would prefer to manually remove the adware on your system, you can find much more up-to-date instructions on The Safe Mac's adware removal page. -
How to get rid of the DVD studio pro extension?
I cut an actors reel in DVD SP 4 and saved the file just with the actors name and when I burn dvd's of it, it always has the the actors name .."studio pro" ho can i get rid of the studio pro, so when they play there reel for clients it just comes up as there name without the studio pro after it?
Thanks for any help ya all
GregThat will be the name of your disc in the property inspector for DVDSP. Click on the disc background/icon in the graphical or outline view, and change the title in the property inspector.
When you go to build/format, make sure the settings in all three tabs are as you want them. -
HOw to get rid of the borderline in the render list item of the news brows
HI,
HOw to get rid of the renderlist
border line,
Give Feedback link
Send To link in the news browser.
After removing thiese things, it should look like a normal html page .
how to achive this ,
if coding required then which is the par file I need to modify
thanks
pkiranHi PKG,
the "GiveFeedback" and "SendTo" links are called "FlexUI" commands. Most of that stuff is highly configurable and naturally you can remove them in the KM Configuration at
SystemAdmin->SystemConfig->KM->CM->UserInterface
-> ... -> ResourceRnderer
Your ResourceRenderer uses a CommandGroup. In this CommandGroup you can add/remove commands.
For example un your case its the CommandGroup "NewsDisplayGroup"
Kind Regards
--Matthias -
How to get rid of picture of the sunset on the webcam?
Hi -
this is probaby a stupid question, but please can anybody tell me how to get rid of the picture of the sunset on the webcam and allow me to use the photo and video application on my netbook?
I've tried to contact Toshiba online but it won't connect.
thanks
StocksSorry mate but I dont understand the question
What notebook do you have?
Do you mean the notebooks internal webcam?
Can this be helpful?
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=189664
+Drag your mouse over to your pop out where you select to use your webcam, instead click the bottom option "Effect" in their click "Screen Cover" and Click "OFF" Tada! The Image in now gone from your cam,+
Please post a feedback! -
I can't update nor download any apps in itunes. Prompted invalid password, upon checking the apple id was not mine. The id was [email protected] whic is not mine. Pls. Help how to get rid of this. Thank you.
try and delete the apps and re-add them
-
I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. I have deleted it from iTunes but cannot get it off the phone. Help!
The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.
-
How to get rid of Safari !!!!!
I must have missed the message to install Safari during one of the many iTunes updates and now I'm stuck with it on my computer taking up 60GB of space! I've tried removing it through Control Panel -> Uninstall Programs, but get the message that I don't have administrator privilages - which I do. Thinking I may have had this installed while I was logged in under my main administrator name, I logged off and logged back in under my only other user name and tried again - same message. So I went to the Safari folder and changed all security privilages to full access for both accounts and it still won't uninstall. How can this program claim I don't have administrator privilages when I used the only two user accounts on my computer?? So in a fit of defiance and desperation, I deleted the Safari folder and then ran the name "safari" in Vista's search box under the Start menu (I even included the wildcard .* to catch all examples). Guess what? Rather than find all traces of safari on my computer so I could delete them manually, Safari started running again!! I cancelled the program before it finished loading and went to recheck the Program Files folder and Safari was back there with a full 60GB of files again! I CAN'T GET RID OF IT!!
Safari is a malicious software program as bad as any Malware or Adware I have ever seen! How can I get rid of it??
(and no, I really do not want Safari - I don't care if you think its the greatest thing since sliced bread - I make the choices on my computer, not some software engineer or marketing division and I DON'T WANT SAFARI!!)
Any suggestions on how to get rid of it? Did I miss something?
Thanks all,
LHThe Safari update is not clear what it is and provided no explanation of what it was - it simply states "Safari". For all I know it could have been an indexing file for iTunes. There was no explanation as to what is was and the install checkbox was already checked so the unsuspecting may quickly and accidentaly hit install along with the iTunes update, thinking it was a required part of iTunes. Regardless of how it got there, I'm trying to get rid of it and it won't uninstall.
Now you may fancy yourself as some kind of wunderkind software expert, but you apparently do not know Vista because it really does take up 60 GB and every time I delete it, it tries to reinstall itself. These are not multiple installations and I am the only user on this computer. You haven't offered me any help - only insults. If you aren't willing or able to offer help or assistance in the most sincerest form this request was intended, than stay out of this thread. Your actions and insults reinforce the prevailing belief that Apple users are unkind, rude, self-important snobs. -
How to get rid of an old Apple ID on my iphone 5 ? The ID belongs to a store I bought my iphone from ,and it's in another country.
You can't. That's the new security feature of iOS7 that users (and others) requested to prevent stolen devices from being restored by theives and reused. Contact the "store" you purchased your phone from and see what they say.
-
When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?
My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed? -
I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?
I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere. -
How to get rid of automatically created server accounts in iCal and Mail?
I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidavI suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264 -
I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it
I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it
There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself. -
How to get rid of title bar of a quicktime window?
The main problem:
I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
Background:
I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
So, with iPhoto I can run a slide show but only while one piece of music is playing.
Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
Or is there a totally different way of obtaining the same effect?
Thanks.
G4 Mac OS X (10.4.8)Hi,
You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.
gl, -
How to get rid of UK holiday in iCal?
For some reason I have suddenly the UK holiday calender in my iCal. Can someone please tell me how to get rid of it. I personally don't want any holiday calender in my iCal.Thanks for your help.
It appears on my iphone but I cannot trace it anywhere in my iCal on iCloud....
Maybe you are looking for
-
I can use Skype without any issue with my MBAir, but as soon as connect using facetime, my internal mic loses it sensibility (I've tracked it under the Preferences/Sound/Input). After disconecting, I can see that the mic starts functioning normally a
-
After upgrading a few days ago to Mavericks on my laptop, I found my FCPX was updated to 10.1. Unfortunately, my main computer, a Mac Pro, is still running Mountain Lion (with FCPX 10.0.9) and I need to stay on that for the time being. Today I receiv
-
Need help in ALV grid editable cells
Hi, I have created a ALV Grid program in which i made certain cells as editable cells.Now my question is if suppose i have 2 rows in my output then if i change the 2nd rows some cells, then some calculation has to perform till this it is fine but nw
-
Why can't you no longer restore trashed messages, all content is now lost?
Why can't you no longer restore trashed messages, all content is now lost?
-
Multiple compositions on a page: first comp stops playing
Hi everyone, I have two compositions on a page and I identify them within the AdobeEdge.bootstrapCallback. As soon as the user scrolls to the first animation I want to start it with an external call (compId.play()). If this is the only composition on