How to get rid of the bar on my screen

Ok the big bar at the bottom of my screen is there a way to shrink it or get rid of it all together

Slide down from the top of the bar.

Similar Messages

  • How to get rid of the bookmark on my screen  and get my whole screen back

    TOday apple upgraded the IOS on my ipad since then we are all messed up and lost stuff
    the thing the most bothersome is that we cant get rid of the bookmark on the screen so we just have2/3 of screen

    Tap the solid blue bookmark on top left to get full screen.

  • How to get rid of title bar of a quicktime window?

    The main problem:
    I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
    I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
    So, with iPhoto I can run a slide show but only while one piece of music is playing.
    Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
    As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
    Or is there a totally different way of obtaining the same effect?
    G4   Mac OS X (10.4.8)  

    You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.

  • How to get rid of the Login page in Portal?

    Hi Guys,
    I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!

    Hi Russel,
    You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
    Check the access tab for pages and the manage tab for applications.

  • How do get rid of the google search box when I first open Firefox?

    How do get rid of the google search box when I first open Firefox?

    Firefox 4 and later versions use a new build-in home page named <b>about:home</b> with a Google search bar on it.
    That about:home page only shows some snippets and has a button to restore the previous session if applicable.
    If you want a home page with extras then set another page as the home page like as used in Firefox 3 versions.
    See also:
    *Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" "Show a blank page"

  • HOw to get rid of the borderline in the  render list item of the news brows

    HOw to get rid of the renderlist
    border line,
    Give Feedback  link   
    Send To  link in the news browser.
    After removing thiese things, it should look like a normal html page .
    how to  achive this ,
    if coding required then which is the par file I need to modify

    Hi PKG,
    the "GiveFeedback" and "SendTo" links are called "FlexUI" commands. Most of that stuff is highly configurable and naturally you can remove them in the KM Configuration at
    -> ... -> ResourceRnderer
    Your ResourceRenderer uses a CommandGroup. In this CommandGroup you can add/remove commands.
    For example un your case its the CommandGroup "NewsDisplayGroup"
    Kind Regards

  • How to get rid of the black border around the artboard

    Hopefully my last question for tonight.
    I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
    As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
    So how-to get rid of the border? Thanks
    I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

    Doesn't change the fact my spider looks like a tick:)
    Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

  • How to get rid of the old songs from iPhone that do not show up in iTunes?

    Every time I delete my entire iTunes library and sync iPhone with it, my music is still loaded with old songs but do not appear on my iTunes. And when I add new songs to my library, the new songs get mixed with old songs.
    How to get rid of the old songs?

    hey buddy....u have to delete the songs from ur iphone....i have got the same issue.....songs are not showing in itunes!!!!!

  • How to get rid of the "time out" when using DAQ AI in the example program

    I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
    Thank you,

    Hello Yajai,
    The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
    I hope this help. Let me know if you have any further questions.
    Sean C.
    SetTimeout.bmp ‏2305 KB

  • How to get rid of the main text box in the back of the page AND move things

    I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

    Hi, Dylan. Welcome to Discussions.
    If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
    Also, you can create a text box the width of the page and then set it for 2 or more columns.
    When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
    Hope this helps to get you started.

  • How to get rid of the message Client submission probe stuck in the Exchange Server Queue?

    We have Exchange 2013 in Hybrid with Office 365.
    How to get rid of the message in the Exchange Server Queue?
    Mounting the database fixed it.

    Mounting the database fixed it.

  • How to Get Rid of the Extra cents left on your gift Card balance?

    I would very much like some help on how to get rid of the 65 cents I have left in my itunes account, without having to spend it on something, or make a new account, or contact Apple. Please someone help with this, I'm sure many other are having trouble as well!!!!

    I noticed there is an extension which lets you clear the title of the current page or replace it with other text. This seems to work equally well in private and non-private windows, however, it doesn't appear to have an option to automatically do it in all private windows. Maybe someone can add that feature (the author isn't maintaining the add-on any more).

  • How to get rid of the "other" memory

    I need steps to find a way how to get rid of the "other" memory. Ive tried deleting my photos. But my memory is still low. My iphone 4 is a 8GB and still that isnt much, and to have this "other" memory take most of it up is making me mad. HELP PLEASE!!!!!!

    About “Other”:
    Go step by step and test.
    1. Start up in Safe Mode.
    2. Backup your computer.
    3. Empty Trash.
    4. Disk space / Time Machine ?/ Local Snapshots
      Local backups
    5. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
    6. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
    7.Try OmniDiskSweeper. This will give the storage size details of the items.
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Be careful. Delete only the files that can be safely  deleted. If you are not sure about any file, don’t touch it.
    8. Move iTunes, iPhoto and iMovie media folders to an external drive.

  • How to get rid of the SAP BPC "three globes" startup screen?

    I am trying to figure out how to get rid of the SAP BPC "three globes" startup screen when we start BPC. I do not want it to pop up.
    I looked at VBA behind the workbooks but could not find anything. Could not make the sheet invisible.
    Is there a way to get rid of the screen? This is the screenshot

    Just found the answer on this very forum!
    Re: How to change the logo, (3 Globes) on the launch page
    Posted: Mar 18, 2009 12:46 PM in response to: David Fletcher Reply
    OK then, now v7sp03 for microsoft has hit the shelves, you can change the logo !!!
    It is quite easy.
    Have the logo file ready in either BMP, GIF or JPG format.
    Put it in your "Server Install -> DataWebFolders[Appset]" folder (so where you keep your files).
    In ApplicationSet parameters, add the parameter COMPANY_LOGO and in the options type the name of the file you just put on the server.
    Now if you restart BPC for Excel, the second excel page that pops up should be showing your new logo or graphic (mine did).
    The use of the logo has been documented in the admin manual -> working with appset parameters
    Some tips.
    I wanted not to clutter the filesystem so i put my logo in the appsetpublications folder and added the path accordingly in the parameter (so now it reads appsetpublicationslogoname.jpg instead of just logoname.jpg).
    If you do not supply a name (only the parameter), your second Excel window (normally holding the graphic) will not appear. That could be an alternative too if you find that whole thing annoying.
    Hope this helps you build great BPC apps,
    Edwin van Geel

  • How to get rid of the command window....

    How to get rid of the command window, automatically, once the .bat file which execute the .jar has been executed?

    If you don't want the command window to show, use:
    javaw yourClass
    instead of...
    java yourClass

Maybe you are looking for

  • Interactive Form - How to make fields read-only through the code?

    Simple question but i can't seem to figure out how to do it. I have an interactive form that have editable fields. How do I toggle fields to make some of them read-only through the code. Please provide cold sample. thanks a lot.

  • One to Many Again :(

    The problem that we currently have is to do with One-To-Many mappings. 1:1 and M:M work perfectly well. Only 1:M relations are not working properly the way we anticipate it to work. Consider the example: PurchaseOrder and LineItems. Each purchase ord

  • HP Pavilion dv6-6b53er no audio from the speakers

    Hi, i have HP Pavilion dv6-6b53er notebook pc  Windows Home basic 64-Bit Service Pack 1 I have no sound in the speakers, but with headphones it is ... the Problem is that when I launch any game sound in the headphones disappears At the Skype sound is

  • How can I do URL converting?

    Hi, In iWS 4.1, I want to change url without using "redirect" function. In other words, URL substring modification using string matching or regular expression. Is it possible? How can i configure for this? -> http:/

  • I cant open face book videos on c6.

    in c6 i cant watch face book videos. Showing, adobe flash player need updation,how it possible.what is the solution any body pls advise.