How to get ringtones to work in iPhone4
I have downloaded some additional ring tones for my iPhone4, and they are in iTunes, great - but how do I get them to go to the section which shows the ringtones so I can actually use them as ringtones? help anyone?
thanks Helen
If these "ringtones" are in your iPod app, that means they are not actual "ringtones", but rather are songs. You will need to transfer them to iTunes on your computer, make them into ringtones, then sync them back to your phone. So, launch iTunes, connect your phone...do not sync just yet...File>Transfer Purchases, then follow the directions here:
http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
Similar Messages
-
How do I get ringtones to work in IOS 5?
My iPhone 4 won't recognise three ringtones that I made using Garageband that worked before the latest upgrade. They work on my wife's. Any suggestions on how to get them to work on my phone?
Mobile PDF apps tend not to support hyperlinks, especially if they're using something other than the http protocol.
-
HT1386 how to get ringtones on iphone 4?
I just got my iphone 4 and i tried to sync it to the computer and i think it worked. Then i watched a video on how to get ringtones and tried it but when i sync it it goes through but the ringtones arent up there. Someone please help!
Ckuan - Hello
I think you misunderstood me.
Let me ask again. The step which you mentioned - "Did you check Settings > Sounds > Ringtone > at the top of the list is your custom ringtones."
There I dont see option for custom ringtones. Instead it says -"Buy More Itomes"
Please suggest. -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!
Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control. -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
How to get Google Gmail working in Yosemite? (not just in Mail)
How to get Google Gmail working in Yosemite? Mail is working. Gmail is coming to Mail. I want to use gmail in Google on the web as I have in the past.
MrAtheist wrote:
It's even an irony that this forum doesnt work on safari at all. All the buttons are just ... buttons. Nothing works when you click on it (i.e. filtering, tagging, etc).
Even more ironic is the fact that I use nothing but Safari, and it works correctly in Gmail, as well as on this site. -
How to get WLAN card working on Tecra M1?
I just bought a Tecra M1, 2nd Hand. Great! There is XP installed but no Toshiba tools. I can't manage to get access to my WLAN router. Seems as if the WLAN connection isn't installed yet. As I know from my Satellite Pro M30, there are Toshiba tools for that, they work smart.
Maybe I would need the drivers - WXP finds unknown hardware during start up - could be the WLAN device - who knows.
When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I already ran the XP assistant for WLAN connections, entered SSID and hex Key; but no WLAN device shows up.
So, has anybody an idea how to get the WLAN working?
Is there a possibility to get the M1 Toshiba Software or can I use my SatPro Software?
Thanks so far JanMy question seems to be difficult... No reply at all
But keeping on searching I found some links to other Toshiba sites
There I found the required drivers for the WLAN
Once the driver is installed, the WLAN device was proper configurable.
The second hardware device that was found and specified as unknown, was the IR Device. I took a driver from my SatPro CD. All fine so far.
By that way: I couldnt find the utilities for download, but I tries to uses the SatPro CD - that works
Hoping that my experiences will help somebody else I mark my question as being answered.
So far Jan -
Mozilla Fire Fox 4, Bookmark Toolbar, how to get it to work?
Mozilla Fire Fox 4, Bookmark Toolbar, how to get it to work?
Hi,
the bookmarks toolbar is blank, it can be turned on or off, but the bookmarks, which are in the toolbar folder when I view all my bookmarks, don't appear in the toolbar. This is when using windows xp. When using windows 7 at home, it works fine. thanks. -
My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..
To find the version of Mac OS X on your computer, all you have to do is click the Apple logo and then About this Mac. For more info, take a look at this doc -> Finding your OS X version and build information
Do you see an error when you try to open the iTunes Store on your Mac?
This Apple doc is a good place to start -> iTunes: Advanced iTunes Store troubleshooting
Maybe you are looking for
-
Bt Home Hub (fibre optic) can it work with my Time Capsule & Airport Express?
I have just moved house after having no problems for years with my virgin cable I have now had to switch to Bt because cable is not available at my new address therefore I would like first and foremost to have my Time Capsule available to use as a ha
-
Calling a Function Pool inside a Class
Hi, I want to call a Function Pool inside a Class Method. I am getting an Error that 'Report or Program Statement already exists' when I call the function pool in the method. can anybody help me on how to call a Function Pool inside a class metho
-
I use aol for all my e-mails...what is the procedure for firefox to use aol when am in a web page that has a contact link for questions or reply. When I click on a link I get the following error message "CANNOT SEND MAIL. NO MAIL PROGRAM IS SET UP TO
-
Is there a way to have files available for download on your iweb site?
Ok here's the question. If I wanted a image file or music file to be available for download on your iweb site.....would that be possible? Kind of like when you go to a website and sometimes it has a link you can press to download a file. If you click
-
Longrunning jobs/Queries in oracle
Hi , How to find long running jobs/queries which are executing less than 6 seconds. The primary criterion for any operation to appear in v$session_longops is to run more than 6 seconds. I want to find out the queries which are executing more than 1 s