How to get selected value from one choice list

Hi All,
i want to get selected value in onechoice list.how to achive this
Regards,
Smaran

check these
http://groundside.com/blog/DuncanMills.php?title=adf_the_list_binding_value_problem&more=1&c=1&tb=1&pb=1
http://blogs.oracle.com/jdevotnharvest/2010/12/reading_the_selected_value_of_an_adf_bound_select_list_in_java.html
http://www.oracle.com/technetwork/developer-tools/jdev/listbindingvalue-088449.html

Similar Messages

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get selected value from OADefaultListBean.

Hi All,
How to get selected value from OADefaultListBean ?
Thanks,

Hi,
To identify the user's selection(s) when the page is submitted, you would add the following logic to your processFormRequest() method:
OADefaultListBean list =
(OADefaultListBean)webBean.findChildRecursive("positionsList");
String name = list.getName();
String[] selectedValues = pageContext.getParameterValues(name);
To retrieve all the values in the list box, call list.getOptionsData().
--Prasanna

Dvt:pivotFilterBar - how to get selected values from filter

Hi all,
I have a question: how to programmatically get selected values from pivot table's filter bar?
I have tried to use
pivotTable.getDataModel().getDataAccess().getValueQDR(startRow, startCol, DataAccess.QDR_WITH_PAGE);but for page edge dimensions it returns BAD DATA, it seems that it returns some cached values.
Environment: JDev 11.1.1.3.0 without any patches.
thanks,
Miroslaw

Hi,
You can retrieve the selected value in the PivotFilterBar through the model of PivotFilterBar, instead of dataaccess:
// get the model from the pivot filter bar instance
QueryDescriptior queryDescriptor = (QueryDescriptor)pivotFilterBar.getValue();
// retrieve a list of criterion, each one is used to populate each lov within the pivot filter bar
ConjunctionCriterion conjunctionCriterion = queryDescriptor.getConjunctionCriterion();
List<Criterion> criterionList = conjunctionCriterion.getCriterionList();
for (int i=0; i<_criterionList.size(); i++) {
AttributeCriterion criterion = (AttributeCriterion)criterionList.get(i);
// _selected is the currently selected value
Object selected = criterion.getValues().get(0);
System.out.println(_selected);
Hope that helps,
Chadwick

How to get selected value from SelectOneChoice

Hi,
I'm facing a problem to get selected value from SelectOneChoice. I have valueChangeListener event on a (SelectOneChoice)item. After user makes a choice I want to store selected value in a bean property to pass it to a method.
For example List item shows dname from dept table after user makes a choice I want to get deptno and populate into bean which I use to pass into my method.
If I use valueChangeEvent.getNewValue() I always get negative value instead I want deptno selected. Sample code pasted below.
public void setDeptno(ValueChangeEvent valueChangeEvent) {
BindingContainer b = getBindings();
OperationBinding oB = b.getOperationBinding("setDeptno");
//Checking instance of because same method is called from another text inputText item.
if (valueChangeEvent.getSource() instanceof CoreSelectOneChoice){
CoreSelectOneChoice cN = (CoreSelectOneChoice)valueChangeEvent.getSource();
if (columnName.getId().toString().equals("deptDname")){
JSFUtils.setManagedBeanValue("dept.deptDeptno",valueChangeEvent.getNewValue());
}

if your selectOneChoice has value equal to #{bindings.deptno} bound to the iterator Dept1Iterator,
then the backing code will look more like
                public void setDeptno(ValueChangeEvent valueChangeEvent) {
                    BindingContainer b = getBindings();
                    OperationBinding oB = b.getOperationBinding("setDeptno");
                    //Checking instance of because same method is called from another text inputText item.
                    if (valueChangeEvent.getSource() instanceof CoreSelectOneChoice){
                        CoreSelectOneChoice cN = (CoreSelectOneChoice)valueChangeEvent.getSource();
                    if (columnName.getId().toString().equals("deptDname")){
                        FacesContext ctx = FacesContext.getCurrentInstance();
                        Application app = ctx.getApplication();
                        ValueBinding bind = app.createValueBinding("#{bindings.Dept1Iterator.currentRow}");
                        Row row = (Row)bind.getValue(ctx);
                        JSFUtils.setManagedBeanValue("dept.deptDeptno", row.getAttribute("deptno"));
                } I haven't tested it, so it could perfectly not work at all

How to get selected values from Select Many Choice List

Hello All -
I am using Select Many Choice List and wish to get the selected values in the bean. I have created method binding for valueChangeListener for the choice list, but not sure how to get the selected values.
I am facing problem in getting values from valueChangeEvent.getNewValue(). For Select One Choice List this returns int, but some list type object for Select Many Choice List.
When I try to print the value it comes something like:
ArrayList newVal = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
System.out.println(newVal);
[Ljava.lang.Integer;@870ad8
Could anyone please suggest how to type cast and use the return of valueChangeEvent.getNewValue() to get the selected values.
Regards -
Rohit

Hi Timo -
Thanks for the suggestion. I could get the values as below:
public void multiOpUnitValChange(ValueChangeEvent valueChangeEvent) {
// Add event code here...
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding opUnitIter = (DCIteratorBinding)bindings.get("OperatingUnit2VOIterator");
Integer[] values = (Integer[])valueChangeEvent.getNewValue();
for (int i=0; i<values.length; i++){
Row row = opUnitIter.getRowAtRangeIndex(i);
System.out.println(row.getAttribute("OpUnitId"));
Thanks -
Rohit

How to get selected values from selectManyCheckbox ?

Hi,
I am a SOA developer and using 'Auto generated adf form' of Human Task. I did some customization in the form. I need to show one dynamic list (contains multiple string values) on a form, from which user will select desired values. For this I have used <af:selectManyCheckbox> adf component.
It has generated code as follows...
<af:selectManyCheckbox value="#{bindings.Response.inputValue}"
                                         label="#{bindings.Response.label}"
                                         id="smc1">
                    <f:selectItems value="#{bindings.Response.items}" id="si9"/>
</af:selectManyCheckbox>
I am able to show list on a form and can select multiple values also.
Now, I want the multiple selected values back in my BPEL process. I need only those values which are selected by user.
Currently I am getting complete list as it is back in BPEL process.
Please help me out..!
Thanks..
Suraj

Unwinding ADF: How to retrieve Selected Items from selectManyCheckbox using ValueChnageListener

How to get a value from one item into another

How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.

Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael

How to get selected value from a listbox

Hi !
I use following code to fill in my LISTBOX with values :
AT SELECTION-SCREEN OUTPUT.
val-key = 1.
val-text = '0016'.
APPEND val TO list_values.
val-key = 2.
val-text = '0028'.
APPEND val TO list_values.
val-key = 3.
val-text = '0035'.
APPEND val TO list_values.
val-key = 4.
val-text = '2001'.
APPEND val TO list_values.
val-key = 5.
val-text = '0515'.
APPEND val TO list_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING id     = 'p_list'
              values = list_values.
My question is - how to get a selected key/text value ? i dont need it to be done dynamically - i just need it in START OF SELECTION to perform tasks.
Thx in advance.

Unfortunetly it does not work
i Define parameter as follows :
PARAMETERS:
p_list AS LISTBOX VISIBLE LENGTH 10.
Then i add values to it :
AT SELECTION-SCREEN OUTPUT.
val-key = 1.
val-text = '0016'.
APPEND val TO list_values.
val-key = 2.
val-text = '0028'.
APPEND val TO list_values.
val-key = 3.
val-text = '0035'.
APPEND val TO list_values.
val-key = 4.
val-text = '2001'.
APPEND val TO list_values.
val-key = 5.
val-text = '0515'.
APPEND val TO list_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING id     = 'p_list'
              values = list_values.
Then when i add a blank section :
AT SELECTION-SCREEN ON p_list.
I set a breakpoint in START OF SELECTION block - but the value is empty no matter what do i select.
Actually when i select value from the list and hit enter key on selection screen the selection in a listbox goes empty :/
Whats the cause of this ?
Edited by: Jacek Zebrowski on Feb 26, 2009 12:38 PM

How to get attribute values from one view to another

HI all,
Thx in Advance..
I have 2 view like v1,v2.In v1 i used one attribute values from "get single attribute" method.And i need the same values in v2 screen.For this i did in v1 outbound plugs , i mentioned the parameter name . How can i get the same values in v2.

Hi chandru ,
you said you declare the parameters in the Outbound Plug of V1. now go to view V2 inbound plug Tab and creat one inbound plug
double click on the plug name .it will navigate you to the event handeler method . Now add the outbound parameter variables in the
parameters
For example : V1firing the navigation plug
a type string " defined in parameter
wd_this->fire_out_to_view2_plg(
    a =      'ABCD'                           " string
you can retrive the value freely in v2 inbound event handeler
a type string " defined in parameter
*   set single attribute
    lo_el_context->set_attribute(
      name = `TEXT`
      value = a )." here you will get the 'ABCD'.
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Jun 23, 2010 7:12 PM

How to get selected values from af:selectManyCheckbox

Hi i am using jdeveloper 11.1.2 and i drag n drop a view object as Multiple select (<af:selectManyCheckbox) component and now i am trying to get the checked values in backing bean so that i can save in the database.
Right now i am getting all the values but not the selected values.
JSPX Page.
<af:selectManyCheckbox value="#{bindings.HREmpDetailsVO1.inputValue}"
label="EMPLOYEES"
binding="#{backingBeanScope.backing_TestForm.smc1}"
id="smc1">
<f:selectItems value="#{bindings.HREmpDetailsVO1.items}"
binding="#{backingBeanScope.backing_TestForm.si1}"
id="si1"/>
</af:selectManyCheckbox>
Bean Class:
public List getSelectedValues() {
if (selectedValues == null || refreshSelectedList) {
selectedValues =
attributeListForIterator(selectedValuesIteratorName,
selectedValuesValueAttrName);
return selectedValues;
public static List attributeListForIterator(DCIteratorBinding iter,
String valueAttrName) {
List attributeList = new ArrayList();
for (Row r : iter.getAllRowsInRange()) {
attributeList.add(r.getAttribute(valueAttrName));
return attributeList;
Can some one pls help me in getting the values with sample code.
Thanks in advance

Thank you so much for your help. But i am getting null values in the SOP. I could get count of selected values but not the values.

How to get selected values from tableSelectMany

Hi all,
I have a view object which displays all column names of a table. I created a tableselectmany table with the view object.
the user has to select some rows (for mining function).
how to get the selected rows from tableselectmany table?
what should be in 'action' and 'actionlistener' ?
thanks in advance.

test(Set<Key> empKeys){
System.out.println("Inside function");
for(Key keys:empKeys){
Row[] row = getCollectionsView1().findByKey(keys,1);
EewCollectionsViewRowImpl vo = (CollectionsViewRowImpl)row[0];
In the action just call this method(test)
and pass the argument as #{applicationScope.managedBean.firstProperty.selectionState.keySet}
I hope this works for you.

How to get array values from one class to another

Supposing i have:
- a class for the main()
- another for the superclass
And i want to create a subclass that does some function on an array object of the the superclass, how can i do so from this new subclass while keeping the original element values?
Note: The values in the array are randomly generated integers, and it is this which is causing my mind in failing to comprehend a solution.
Any ideas?

If the array is declared as protected or public in the superclass you can directly access it using its identifier. If not, maybe the superclass can expose the array via some getter method.
If this functionality can be generified (or is generic enough) to apply to all subclasses of the superclass the method should be moved to the superclass to avoid having to reproduce it in all the subclasses.

How to get selected values from datatable with paging

hi all
here is my problem
I have a datatable with paging size of 2 and first column as checkbox.
now i have total record of 5 data,2 row on each page.
Now i m selecting 1-1 row from each page.
When i m clicking Command button to display all the selected row from different page ,i m only able to display values selected from last page.
Through debug i can see that only last page value is set to TRUE OR FALSE and every other value is neither true nor false.
any help???
thanks

<f:facet name="footer">
<h:panelGroup binding="#{Page1.groupPanel1}" id="groupPanel1"
style="display: block; text-align: center" styleClass="list-paging-footer">
<h:commandButton action="#{Page1.dataTable1_firstPageAction}" binding="#{Page1.dataTable1FooterFirstButton}" id="dataTable1FooterFirstButton" image="resources/paging_first.gif" immediate="true"/>
<h:commandButton action="# Page1.dataTable1_previousPageAction}" binding="#{Page1.dataTable1FooterPreviousButton}"
id="dataTable1FooterPreviousButton" image="resources/paging_previous.gif" immediate="true"/>
<h:commandButton action="#{Page1.dataTable1_nextPageAction}" binding="#{Page1.dataTable1FooterNextButton}"
id="dataTable1FooterNextButton" image="resources/paging_next.gif" immediate="true"/>
<h:commandButton action="#{Page1.dataTable1_lastPageAction}" binding="#{Page1.dataTable1FooterLastButton}"
id="dataTable1FooterLastButton" image="resources/paging_last.gif" immediate="true"/>
</h:panelGroup>
</f:facet>
Above is the code which i m using for paging which is command button
Any problem with it.???
thanks

How to get a values from one form to another form

Hi All,
I am using oracle forms 10g.
I have created two forms. First form named as Hotel reservation req and second form named as Hotel Res Summary.
I the first form i have one field named Requisition_number and I have one button and when i press the button in the first form the summary form is called and it need to bring all the data regarding that requisition_number in first form.
I have written a query in when button pressed Like this
declare
:Global.V_REQ_NO := :XXMBHOTRESREQ_DB.REQUISITION_NO
type r_cursor is ref cursor;
c_XXMBHIS r_cursor;
V_xxmbht XXMB_DOMHTRS_REQ%rowtype;
begin
open c_xxmbhis for select * from XXMB_DOMHTRS_REQ where requisition_number=:Global.V_REQ_NO
loop
fetch c_xxmbhis into v_xxmbht;
exit when c_xxmbhis%notfound;
--dbms_output.put_line (V_XXMBHT.REQUISITION_NUMBER);
end loop;
close c_XXMBHIS;
end;
And how to refer this to the calling form.
But now the form is opening and record is not querying can any one correct me where i went wrong.
Thanks & Regards
Srikkanth
Edited by: Srikkanth.M on Aug 19, 2011 6:43 PM

I the first form i have one field named Requisition_number and I have one button and when i press the button in the first form the summary form is called and it need to bring all the data regarding that requisition_number in first form.If more than 1/4 of your Forms will need the REQUISITION_NUMBER then using a GLOBAL variable makes scense. However, if it is only your Hotel Reservation and Hotel Res Summary forms that will use the REQUISITION_NUMBER then use a Parameter List instead. Global variables are always of type CHAR so you could encounter conversion errors if you don't explicitly cast the value to the correct data type. Parameter object can be of type CHAR, NUMBER and DATE and offer greater flexibility. If you need an example of how to use a parameter list, open the Forms Help system, go to the Search tab and search on "Creating a Parameter List." This article give a brief overview and a list of all the built-ins associated with Parameter Lists. You will need to create a Parameter object in your Hotel Req Summary form to catch the parameter passed via the Parameter List. Then you will need to write code to do something with the value passed (usually in the When-New-Form-Instance trigger).
Craig...

How to get selected value from one choice list

Similar Messages

Maybe you are looking for