How to get some color for urxvt

What I'm looking for is to make my urxvt look like it does in this screenshot: https://i.imgur.com/UgH2tJ3.jpg
I've been messing with my ~/.Xdefaults, but that didn't change anything. I'm using rxvt-unicode-pixbuf from the AUR in case that matters.

Perhaps slithery should have said most programs have color support. You just need to configure the ones you want to use. The terminal just shows what the running program tells it to show. If you want color in vim, you'd set up color in vim. If you want color in mutt, you'd set up color in mutt. Etc.
The terminal has to be capable of showing colors, but yours is. Just because the terminal is capable, though, you still have to use programs that output color.
ls is commonly (and by default in arch) aliased to "ls --colors" which will use the dircolors settings to highlight different filetypes in different colors when you run `ls` commands.
Grep has a similar color setting.
Pacman has color settings.
Most text editors have color settings.
See a pattern?

Similar Messages

How to get similar color for objects in different pictures

how do you get similar color for objects in different pictures
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
I have tried duplicating layers and it just replaces the whole image, it seems to work using levels layers but not the other layers ... I have 30 more images to do and would ideally not like to adjust all the images manually ? I dont mind doing minor tweaks. Essentially all the images where taken with the same camera and lighting and lens's ...
Screen shot is where I'm at at the moment...
I have posted this question else where but was told to repost - this is a link to my previous post as to where we got to
http://forums.adobe.com/message/4720576#4720576

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

How to get "Selected" color for custom toolbar buttons?

RH 8.0.2.208
RoboHelp HTML
WebHelp output
I'm getting flack from internal QA folks about the custom toolbar buttons not having the same "selected" color as the default buttons (Contents, Index). I've copied the background color info from the <btnselected></btnselected> section for the built-in Contents to the <btnselected></btnselected> section for a custom toolbar button, but RH is ignoring it.
Any hints?
Leon

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

FrameMaker10 - Windows 7 - How to get background color for a paragraph tag?

I am trying to create my heading1 with a background like the picture above.
I have put the blue background on a master page, but the body frame goes into the blue background and subsequently the blue background does not show through.
Any ideas?
Thanks,
Cindy

I can't test this right now, but I remember that when extracting a TOC, table title paragraphs appear out of order when mixed with main-text-flow paragraphs, because of the way that FM keeps track of table information. I'm not sure if the problem also affects paragraphs in table cells.
Colors behind text is a frequent request. It's always a good idea to post a formal feature request here: Wishform. Eventually user requested features have been known to appear in future FM releases.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Arnis Gubins wrote:
Cindy, I missed the fact that you're title is centred in the block. You could use a single-cell table construct to hold the contents for the title and have the title paratag set to be in the middle of the cell. (you could also colour the cell and skip colouring on the Master page).
There are always multiple ways to do things in FM, that's why it sometimes seem so hard to use...

How to get pop-up for entering some value on it by user on Adobe INTERACTIV

Hello
We are developing a interactive adobe form,
1) User would like get some popups for entering the values in the popup and clicking either OK or CONTINUE, pls. let me know how to handle this?
2) can i get CALENDER, when user tries to input DATE entry? how its?

Hi,
You can create a subform overlapping you main body page and you can use this subform as pop-up.
You just need to do following things:
1. Create a subform over you main body page in the area where you want to show the pop-up, say SF_POPUP is the name of this subform.
2. Give it a background colour(So that it looks different from the main page).
3. On this subform SF_POPUP, create the fields you want the user to enter. along with these fields create a button 'OK' or 'Continue' as per your requirement.
4. Write the below code on click event of this button:
SF_POPUP.presence = "Hidden".
5. On you main body area create a button to show this popup and write the below code on it:
SF_POPUP.presence = "Visible".
6. By default set this popup SF_POPUP as hidden from subform properties.
Hope this will help for your first requirement, for your second requirement Arvind has already given a solution.
Regards,
Vaibhav

How to get themes color data

Hi, I want to do a research about colors related to words and want to get some color themes data from kuler. It seems that I should use RSS feed to get it. I applied a key for it but I don't know how to use it, where to enter the command to get my desired data. Do I need to install the kuler app or I could do it online? Thank you.

Hi dfsssss,
Kuler provides RSS/XML APIs to access the Kuler data. Refer to te documentation at:http://learn.adobe.com/wiki/display/kulerdev/B.+Feeds. To access Kuler via command line you will need a tool that can communicate with the web to get the data via a library or the console version of a programming language that has http in built. Kuler data is returned as XML andcan be parsed by any XML parser.
Thanks,
Kuler Team

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to get background color of controls ?

Hello everyone.
How to get background color of controls ?
When we use AWT/Swing,
we can get background color of component by using Component.getBackground()
It is regret that I can not find any method for such a method in JavaFX.
And how do we detect the change of background color of controls ?
Best regards.

Hi Tadashi,
try this.
@Override
public void start(final Stage primaryStage) {
    primaryStage.setTitle("Test ChangeListener");
    Button btn = new Button();
    btn.setText("change background");
    btn.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent event) {
            primaryStage.getScene().setFill(Color.rgb(
                    (int)(Math.random() * 255),
                    (int)(Math.random() * 255),
                    (int)(Math.random() * 255)));
    StackPane root = new StackPane();
    root.getChildren().add(btn);
    primaryStage.setScene(new Scene(root, 300, 250));
    primaryStage.getScene().fillProperty().addListener(new ChangeListener<Paint>() {
        @Override
        public void changed(ObservableValue<? extends Paint> arg0, Paint arg1, Paint arg2) {
            System.out.println(
                    "old color: " + arg1.toString()
                    + ", new color: " + arg2.toString());
    btn.getOnAction().handle(null);
    primaryStage.show();
}Peter

How to get default color of a selected row in a JLIst

I have a JList that I am changing the font color for based on a certian situation so I created my own MyCellRenderer to do this. However, when I select an item in the list the row is no longer highlighted. I used the isSelected method to determine if a row was selected and then change the background color of that row. However, I would like the color to be the default color that you get when you select a row in a default JList. I can't seem to figure out how to get that color. How do I obtain what that color is? I found an example where you can get the default color for the background of a button and use that color so I would guess it is something similar to that. My code is below so I hope someone can tell me how to get that color that I want.
Thanks...Chris
class MyCellRenderer extends JLabel implements ListCellRenderer {
     public MyCellRenderer() {
          setOpaque(true);
     public Component getListCellRendererComponent(
         JList list,
         Object value,
         int index,
         boolean isSelected,
         boolean cellHasFocus)
         int index1 = value.toString().indexOf("-");
           String errors = value.toString().substring(index1 + 1, index1 + 6).trim();
         int numErrors = Integer.parseInt(errors);
           if (numErrors > 0)
                  setForeground(Color.red);
                  setBackground(Color.white);
         else
              setBackground(Color.white);
              setForeground(Color.black);
         if(isSelected)
              //ColorUIResource col = (ColorUIResource)UIManager.getDefaults().get("JButton.background");
              ColorUIResource col = (ColorUIResource)UIManager.getDefaults().get("Button.background");
              setBackground(col);
         setText(value.toString());
         return this;
}

Swing related questions should be posted in the Swing forum.
I would like the color to be the default color that you get when you select a row in a default JList. I can't seem to figure out how to get that colorlist.getSelectionBackground();

How to get the ItemKey for a Workflow triggered by an event in Oracle Apps

Hello,
I have added a custom sub process to the seeded "OM Order Header" workflow. The process sends a notification. There are a few attributes in the body of the message tied to this notification, to which I am trying to assign values to using the syntax:
SetItemAttrText (itemtype, itemkey, attrname, attrvalue).
I have the internal names for the item type and attribute name, but don't know how to get the value for the item key. I understand the item key is supposed to be unique for each item type and is automatically generated by the workflow engine when the work flow fires. Is there a built-in function or some means to get this value?
Regards,
Smita

Have you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein

How to get more features for Captivate 6

Hi all,
I've installed Captivate 6 on my laptop at work, I use it for creating training material for our project management system. I was just looking at some Adobe video tutorial and there are some features shown in the videos that I can't find on my captivate (for example Drag and Drop interaction, some particular widget like "Hangman" etc...). I tried to download them, clicking on the "Download more interactions" but there are any available. So, is there a way to get those features, at least those shown in your video tutorial for Captivate 6?
Thank you very much
Elena

Hello,
thank you for your answer.
I have the version 6.0, so maybe I can't get those features because of the version that I have.
Even if I click on "Download more" on the Interactions window, there are no Interactions available, but is it a problem related to my version or it's because there aren't available new features?
Thank you very much,
Elena Bettarini
Date: Thu, 14 Nov 2013 00:40:11 -0800
From: [email protected]
To: [email protected]
Subject: How to get more features for Captivate 6
    Re: How to get more features for Captivate 6
    created by Lilybiri in Adobe Captivate - View the full discussion
Hello and welcome,
I cannot remember for the Hangman interaction anymore, but Drag&Drop was only available for subscription users, for version 6.1.0.3190 Maybe it was not clear in the video you are pointing at, that not all features were available for box licenses. Which version do you have?
Lilybiri
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5841167#5841167
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5841167#5841167
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5841167#5841167. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

[Win-ILL 10]How to check overprint & color for Pattern Swatches?

Hi all,
Im using Visual C++ 6.0 & Illustrator 10.
Please tell how to check whether overprint is applied to an object inside a Pattern Swatch(I dont want to Expand the object)
I also want to get the color for the object inside the Pattern Swatch
.Any Solution for this?
Thanks
myRiaz

The reference to port 427 is in any firewall on the computer. Network communication is done over these ports and the job of the firewall is to monitor and block these ports.
This document might also be relevant for the problem.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04011652&lc=en&cc=us&dlc=en&product=5199463
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

How to get money back for Nokia n97?

Hi Guys!
I gave up with Nokia N97!!! I have a lot of problems with it. All of them are known. While this 2,5 months of using the device I was so **bleep** off and felt very uncomfortable while using it! Is that what we paid $700 for?? To see how good it is in the official video commercial and how damn SLOW, buggy and how bad the hardware is? I waited for software update and was hoping to see nice and fast device, oh! and working GPS! Instead - it's still the same "smart" which is most worse on nokia market. That's enough!
So now I have this question: How to get money back for Nokia n97 after 2,5 months of usage? or maybe exchange to n900? I will call to customer care center soon but maybe someone of you have done this already and you can give some tips?
Thank You!
Cheers
Hi guys!

put it up for sale, you have used it for over 30 days nokia will not give you a refund. sell it and buy yourself another device in this case. im giving mine away to a friend. he likes the n97 so its a win win
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

How to get pc-doctor for win7?

How to get pc-doctor for win7? Thanks.
This question was solved.
View Solution.

Hi,
The PC Doctor version that HP had provided on some PCs using VISTA was licensed software. If you are still running VISTA then your can burn a bootable CD containing PC Doctor. A non-OEM license for PC Doctor is quite expensive the last time that I had checked.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to get some color for urxvt

Similar Messages

Maybe you are looking for