How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

After attaching the headset to the audio jack, i get sound from the laptop speaker

after attaching the headset to the audio jack, i get sound from the laptop speaker

This worked for me as well. Great find! I have gigabyte ep45-ud3r motherboard and I was getting all sound through external speakers except itunes was playing the sound out of the digital output instead of the speakers. I could see this when I went to control panel > hardware & sound > manage audio devices. I did the repair as described above and now I have sound in iTunes.

Can I get sound when filming video on Mini iPad?

When I am shooting video with my mini iPad, can I get sound and if so how?

Hi Nitekitty,
Thank you for using Apple Support Communities.
Yes, you can get sound when shooting video with your iPad mini. Take a look at the section "Take photos and videos" section of the iPad Users Guide. See page 85 in the following link:
https://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Cheers,
Jeff D.

How to get notified when changes happen on Hyper-V host or VMs

Is there a way to get notified on Hyper-V host or VM changes? Our intention is to notify the system-administrators on any changes.
1. How to get notified when new VM is created (or deleted) on Hyper-V.
2. How to get notified when any memory/CPU/disk is added (or deleted) on any VM(s).
In general:
- Get notified when any changes happens to Hyper-V host.
- Get notified when any changes happens on any VMs.
Our target servers are Windows Server(2008, 2008 R2, 2012, and 2012 R2)
We tried to get the notification using "Event Viewer" on different Windows servers (2008, 2008 R2, 2012, and 2012 R2)
We were able to get event-logs only on one of our 2012 R2 server as described below on creation/deletion of VMs (on another 2012 R2 server, we did not got any such event, Is there any setting required on host computer to get Hyper-V event-logs in "Event
Viewer"?)
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 12/18/2014 1:21:45 AM
Event ID: 13002
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: HPHyper-V.COMPUTERNAME.lab
Description:
A new virtual machine 'TestVM' was created. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 12/17/2014 10:57:01 PM
Event ID: 13003
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: HPHyper-V.COMPUTERNAME.lab
Description: The virtual machine 'TestVM' was deleted. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)

Thanks for your reply,
Just to make it more clear:
In our environment we have enabled Hyper-V on following Windows servers: 2012 R2, 2012, 2008 R2, 2008. The environment is very dynamic, VMs are getting created and deleted very frequently. Our intention is to get notified by any means on VM creation/deletion,
currently we are relying on event-logs (we are OK with any different mechanism for such notification if there exists, i,e other than event-logs)
We were able to get event-logs only on few of our 2012 R2 server on creation/deletion of VMs. On another 2012 R2 server, we did not got any such event (do we need to make some settings on 2012 R2 to get events? If yes, what are those settings).
Also we are not getting any such event of VM creation/deletion on our Windows Server 2012, 2008, 2008 R2. Is there any setting required on hese host computer to get Hyper-V event-logs in "Event Viewer" for VM creation/deletion?

How to get header when we use CL_GUI_FRONTEND_SERVICES= GUI_DOWNLOAD

Hi SDN's,
Can u tell me how to get headers when we download data to excel with using (we are using DBF as file type in the following method )
CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
(We can't use GUI_DOWNLOAD)
Thanks in advance..
BR

Hi,
I m giving u a bdc code i hope ur prob ll be solved.
*& Report ZDTK_BDC_LT01
*& PROGRAME TITLE : LT01
*& AUTHOR         : D TARUN KUMAR
*& MM CONSULTANT : Mr. MRINMOYE CHAKRABORTY
*& REQUEST NO.    : RD1K901995
*& TRANSACTION ID : ZLT01
*& PACKAGE        : ZTARUN
*& DESCRIPTION : BDC REPORT TO UPLOAD INITIAL STOCK POSTING AND
*&               STORAGE BINS THROUGH LT01.
REPORT ZDTK_BDC_LT01
       no standard page heading line-size 255.
TYPE-POOLS: TRUXS.
STRUCTURE DECLARATION
TYPES : BEGIN OF TY_UPLOAD,
                 LGNUM(3),
                 BETYP(1),
                 BENUM(10),
                BWLVS(3),
                 MATNR(18),
                BISMT(18),
                 ANFME(16),
                WERKS(4),
                LGORT(4),
                 CHARG(10),
                LETYP(10),
                VLTYP(3),
                VLBER(3),
                VLPLA(10),
                VLQNR(10),
                 NLTYP(3),
                NLBER(3),
                 NLPLA(10),
                NLQNR(10),
          END OF TY_UPLOAD.
INTERNALTABLE & WORKAREA DECLARATION
DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
       T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL,
       W_UPLOAD TYPE TY_UPLOAD,
       W_BDCDATA TYPE BDCDATA,
       W_BDCMSGCOLL TYPE BDCMSGCOLL,
GLOBLE DECLARATION
       G_FLNAME TYPE STRING,
       G_MESSAGE(70) TYPE C,
       IT_RAW TYPE TRUXS_T_TEXT_DATA,
GLOBLE DECLARATION
       WA_OPT TYPE CTU_PARAMS.
       WA_OPT-UPDMODE = 'A'.
       WA_OPT-DEFSIZE = 'X'.
       WA_OPT-DISMODE = 'A'.
SLECTION SCREEN DECLARATION
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETER : P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
*PERFORM GET_FINAL.
*PERFORM GET_MIGO.
PERFORM SESSION.
*PERFORM TEST.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO T_BDCDATA.
ENDIF.
ENDFORM.
*&      Form GET_FILENAME
      TEXT
FORM GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   PROGRAM_NAME        = SYST-CPROG
   DYNPRO_NUMBER       = SYST-DYNNR
   FIELD_NAME          = 'P_FILE'
IMPORTING
   FILE_NAME           = P_FILE
ENDFORM.                    " GET_FILENAME
*&      Form UPLOAD_DATA
      text
form UPLOAD_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
    I_LINE_HEADER              = 'X'
    I_TAB_RAW_DATA             = IT_RAW
    I_FILENAME                 = P_FILE      "WORK TABLE
TABLES
    I_TAB_CONVERTED_DATA       = T_UPLOAD[]    "ACTUAL DATA
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " UPLOAD_DATA
*&      Form SESSION
      text
FORM SESSION .
*sort t_upload by bismt.
LOOP AT T_UPLOAD INTO W_UPLOAD.
REFRESH T_BDCDATA.
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-CHARG
IMPORTING
OUTPUT        = W_UPLOAD-CHARG .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-VLBER
IMPORTING
OUTPUT        = W_UPLOAD-VLBER .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-NLTYP
IMPORTING
OUTPUT        = W_UPLOAD-NLTYP .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-NLBER
IMPORTING
OUTPUT        = W_UPLOAD-NLBER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = W_UPLOAD-CHARG
IMPORTING
   OUTPUT        = W_UPLOAD-CHARG .
DATA : BWLVS(3),
       LGORT(4),
       WERKS(4),
       CHARG(10),
       LETYP(10),
       VLTYP(3),
       VLBER(3),
       VLPLA(10),
       VLQNR(10),
       NLTYP(3),
       NLBER(3),
       NLQNR(10).
DATA : W_MATNR(18).
*SELECT SINGLE MATNR FROM MARA INTO W_MATNR
                  WHERE BISMT = W_UPLOAD-BISMT.
BWLVS = '999'.
LGORT = '3500'.
WERKS = '1030'.
LETYP = 'E1'.
VLTYP = '998'.
VLBER = '001'.
VLPLA = 'AUFNAHME'.
NLTYP = '354'. "(packaging material)
*NLTYP = '353'. "(spareparts material)
NLBER = '001'.
*include bdcrecx1.
*start-of-selection.
*perform open_group.
perform bdc_dynpro      using 'SAPML03T' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'LTAP-CHARG'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LTAK-LGNUM'
                              W_UPLOAD-LGNUM. "'350'.
perform bdc_field       using 'LTAK-BENUM'
                              W_UPLOAD-BENUM. "'1000000000'.
perform bdc_field       using 'LTAK-BETYP'
                              W_UPLOAD-BETYP. "'P'.
perform bdc_field       using 'LTAK-BWLVS' BWLVS.    "'999'.
perform bdc_field       using 'LTAP-MATNR'
                              W_upload-MATNR.    "'40000009'.
perform bdc_field       using 'RL03T-ANFME'
                              W_UPLOAD-ANFME.    "'1,000'.
perform bdc_field       using 'LTAP-WERKS' WERKS.    "'1030'.
perform bdc_field       using 'LTAP-CHARG'
                              w_upload-charg.
perform bdc_dynpro      using 'SAPML03T' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'LTAP-NLPLA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RL03T-ANFME'
                              W_UPLOAD-ANFME.    "'1,000'.
*perform bdc_field       using 'LTAP-ALTME'
                             'KG'.
perform bdc_field       using 'LTAP-LETYP' LETYP.    "'E1'.
*perform bdc_field       using 'LTAP-CHARG' W_UPLOAD-CHARG.    "'0000000101'.
perform bdc_field       using 'LTAP-VLTYP' VLTYP.    "'998'.
perform bdc_field       using 'LTAP-VLBER' VLBER.    "'001'.
perform bdc_field       using 'LTAP-VLPLA' VLPLA.    "'AUFNAHME'.
perform bdc_field       using 'LTAP-NLTYP'
                               W_UPLOAD-NLTYP.       "'351'.
perform bdc_field       using 'LTAP-NLBER' NLBER.    "'001'.
perform bdc_field       using 'LTAP-NLPLA'
                              W_UPLOAD-NLPLA.    "'01 00 01'.
*perform bdc_transaction using 'LT01'.
*perform close_group.
CALL TRANSACTION 'LT01' USING T_BDCDATA
                        MODE 'A'
                      UPDATE 'A'
                        OPTIONS FROM WA_OPT
     MESSAGES INTO T_BDCMSGCOLL.
IF SY-SUBRC <> 0.
READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = SY-MSGID
        LANG      = 'EN'
        NO        = SY-MSGNO
        V1        = SY-MSGV1
        V2        = SY-MSGV2
        V3        = SY-MSGV3
        V4        = SY-MSGV4
      IMPORTING
        MSG       = G_MESSAGE
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      WRITE : / W_upload-matnr ,'-----' , G_MESSAGE.
      REFRESH T_BDCMSGCOLL.
    ENDIF.
    ENDIF.
*clear : w_matnr, w_upload.
ENDLOOP.
ENDFORM.                    " SESSION

I cannot get sound through my laptop speakers ever since I used a digital speaker

I cannot get sound through my laptop speakers ever since I used an external digital speaker. Cannot seem to switch back to lap top speakers in my SYSTEM PREFERENCES...only showing DIGITAL out put option

Hi there Lutostan,
It sounds like you have disconnected the digital audio speakers from your MacBook Pro but all you have available in your audio settings. Take a look at this info from the following article named:
Troubleshooting issues with no audio from built-in speakers on Macs
If the Internal Speakers option does not appear in the Output tab and your computer is not a Mac Pro, check that Digital Out is present as in the image below:
Confirm again that all external audio devices and cables have been removed.
Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
If you do not see a red light, proceed to step 5.
If the issues persist, contact Apple support for further troubleshooting assistance.
Learn more
You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Thank you for using Apple Support Communities.
Take care,
Sterling

I can't get sound when my iMessages come through. The volume is on. Any ideas?

I Can't get sound when my iMessages come through. The volume is on. Any ideas?

Surely somebody knows what the problem is? Anybody.

How to get information from my laptop to my ipad

I`m new on I-pad
How to get information from my laptop to my ipad
Saludos
Josè Montero

Heres some Apple Support tips on the subject.
How to transfer and sync content to your computer:
http://support.apple.com/kb/ht1296
How to transfer files between your computer and mobile apps:
http://support.apple.com/kb/PH1693
How to do file transfers:
http://support.apple.com/kb/HT4094

I can't get sound when I record video

I can't get sound when I record video

Install the free VLC player and use that.
http://www.videolan.org/vlc/download-macosx.html

HT201335 why can't i get sound when I mirror from the latest mac mini?

why can't i get sound when I mirror from the latest mac mini?

if you have sound icon on your menu bar: press alt on your keyboard and click mouse on sound icon - check is the correct audio output is selected.
If you do not have this icon: System preferences > Sound > Output and check audio output

How to get event when app is minimized.

How to get event when app is minimized in only windows app, not phone version.

Hi,
Suspending Event will be called when a windows store app is minimized. It will not hit the Suspending Event when minimised while debugging, So you need to trigger it manually from the VisualStudio Toolbar.
Also Read
Application Lifecycle for windows apps
Pradeep AJ

Can someone help please. I recently boughYou have no bookmarks.t a IPad Air, when I go to Utube on Google I don't get sound, when I go to the same site on Safari I get sound? Thank you. Mark

I recently bought a iPad air, when I use Google and go to Utube I do not get sound, when I go to the same site using Safari I do get sound? Can someone explain please, thank you. Mark

Hello there, Mark.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with apps downloaded from the App Store:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
In your case you may also want to close all apps that are running during the "Restart the App" step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to get event when any library object added to indesign doc?

I want to do some operation when any library object is added to doc. So please tell me how to get event when any library object is added to the doc. better provide some code snippet.

Daves61,
I need to clarify what kind of event you're interested in.
1. When you click once on page/spead widget in the Pages panel and only widget becomes selected. The layout window remains unchanged. OR
2. When you doubleclick on page/spread widget the selected master spread appears in the layout window.
In the first case you work with Pages panel.
Have a look to file PageTransitionsPanelObserver.cpp from SDK.
PageTransitionsPanelObserver::LazyUpdate()
In the second case you work with Layout window.

How to get sound when my laptop is hooked to my tv w/hdmi cable?

Similar Messages

Maybe you are looking for