How to get sour to play through mini display via vga without sound cables?

I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.

Whovian wrote:
I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.
Can't be done dude

Similar Messages

  • How to get audio to play through TV?

    I have a Thunderbolt to HDMI cable and can only get video to show up on my HDTV screen. I am trying to get audio to play through the TV as well, but it only plays through my Macbook Pro. Any suggestions?

    Hi ajlarson6,
    I found some information concerning the settings that need to be in place to play audio through a TV:
    OS X Mountain Lion: Use a television as a display
    http://support.apple.com/kb/PH10671
    I hope this helps!
    - Ari

  • How to get audio to play through speakers

    I have a Vizeo TV smart monitor, an Apple TV (of course), and a DVD/Receiver. A nice set of speakers are hooked up to the DVD player.
    I introduced the Apple TV to this family recently. The Apple radio stations played through the speaker in the Vizeo TV and was not so good. Then I bought a optical video cable and used it to connect Apple TV to the DVD receiver. That worked brilliantly for a while and the blues songs from the blues station on Apple TV was coming through in full stereo through the speakers.
    This worked for a while but more recently when I turned the system on again to listen to the same station, the sound was coming through the tv monitor's single speaker, not my mildly expensive nice ones. Does anyone know what's going on? btw Apple TV is connected to the tv monitor on HDMI3 and I have tuned the monitor to HDMI3 so that should be consistent.
    Thanks,
    Bill

    that what you're asking is why the original appletv the alu one don't support airplay when
    the airport express do right?
    guess it's a choice from apple maybe it required a software update as airplay was "invented" long after the last atv1g os update and rolling out an os update for a discontinued product as the
    first appletv was osX and intel x86 based
    and it's replacement atv2 is ios and Arm based

  • How to get STP to play through my miglia harmony audio?

    Hi,
    Despite selecting both input and output as the harmony in STP preferences it wil only record through, and not output to, the miglia. The Miglia is a firewire audio in/out which works fine in and out with Live 5 and out with Reason 3. It's driving me nuts as I cannot properly audition fx to use in Live projects as they sound so different through the i-macs speakers.
    Also does anyone know if the great fx that coe with STP can be used as audio unit fx in other programs i..e. Live or only with Apple programs? I also tried this but with no joy.
    Thanks

    After a little snooping around I remembered that the left and right audio tracks in FCP were initially not marked as a stereo pair, but mono a1 and a2. I did select them and check the "Stereo" option under the "Mark" menu.
    I then checked the capture window settings and saw that it showed that audio would be captured as stereo. I'd expected to see it as capturing two mono tracks. I thought I had the solution. Maybe the capture settings changed when I checked a1 and a2 as "stereo."

  • How to get the form printed through the transaction ME42

    hi,
    How to get the form printed through the transaction ME42.
    For example :
    In t.code vf03 . In the main menu there is an option billing document , when we click on that we get a drop down menu which shows issue output to. If a print program call has the code to get the value from the t.code , immdiately when we click issue output to it call the form.

    Here go to ME42 put in your RFC no, in the menu Header -- Messages, go there and see if a message has been inserted, else you can insert one.
    when you save this, it will call the form.
    Regards,
    Ravi

  • VISA: How to get the CSV file through C/C++ code?

    How to get the CSV file through C/C++ code?
    I'm communicating with a USB oscilloscope using VISA.

    Thank you for your reply.
    I am using Apache Commons File Upload. Here is the code where I got the "fi".
         DiskFileUpload fu = new DiskFileUpload();
              fu.setSizeMax(1000000000);
              List fileItems = fu.parseRequest(request);
             Iterator itr = fileItems.iterator();
              FileItem fi = (FileItem)itr.next();
              if(!fi.isFormField())
                File tempFileRef  = new File(fi.getName());
         System.out.println("Field = "+tempFileRef.getAbsolutePath());
         }

  • Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone.  Does anyone know how to get them to play on iPads/iPhones?

    mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone.  Does anyone know how to get them to play on iPads/iPhones?

    You have to make sure they are fully compatible with iPad
    Video formats supported:
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • How do I make audio play through both headphones in garageband?

    How do I make audio play through both headphones in garageband?

    C∆NOK∆N wrote:
    How do I make audio play through both headphones in garageband?
    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • HT1725 Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

    Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • Mini Display to VGA adapter stopped. The Mini Display to HDMI is still working fine. How´s that possible?

    The mini display to VGA adapter had stopped, whinle the Mini Display to HDMI keeps working fine. The minid display to VGA adapter was replaced and the VGA cable as well, and the problem is the same. This test was made with two diferent monitors with VGA entries. How´s that possible to happen? Is that a configuration trouble in the MBP?

    The Apple´s customer support gave us the solution for this problem:
    SMC reset
    PRAM reset
    The VGA adapter return to work properly aflter this procedure.

  • How to get Text from (.txt) file to display in the JTextArea ?

    How to get Text from (.txt) file to display in the JTextArea ?
    is there any code please tell me i am begginer and trying to get data from a text file to display in the JTextArea /... please help...

    public static void readText() {
      try {
        File testFile = new File(WorkingDirectory + "ctrlFile.txt");
        if (testFile.exists()){
          BufferedReader br = new BufferedReader(new FileReader("ctrlFile.txt"));
          String s = br.readLine();
          while (s != null)  {
            System.out.println(s);
            s = br.readLine();
          br.close();
      catch (IOException ex){ex.printStackTrace();}
    }rykk

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • HT5517 I can not get the air play icon to display on my iPhone 5s?

    I can not get the air play icon to display on my iPhone 5s?

    See
    http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US

  • HT4236 How can get the pictures from my iPod to my iPad without a computer?

    How can get the pictures from my iPod to my ipad without a computer?

    Then there is absolutely no way to get the pictures from the iPod to the iPad unless you import them to your computer and then import them inor iTunes and sync them to the iPad.
    Where did the pictures come from? Which iPod version do you have?

  • I downloaded a rental movie (SD) onto my iPad2 and tried to play on my TV via VGA adaptor; it says not authorised. How come and what can I do?

    I downloaded a rental movie (SD) onto my iPad2 and tried to play on my TV via VGA adaptor; it says not authorised. I have done this many times before. This is the dirst time I have had this  not authorised message. Has anyone any ideas what  what can I do? Many thanks in anticipation.

    Delete the file and re-download again.

Maybe you are looking for

  • Alert file !!!

    Just created the new db with CREATE DATABASE ... .command Created TSPs with Create TSPs command. However Oracle did not have the alertSID.log file in bdump dir. Change the permission.group and owner to 777 oracle:oinstall . Started and shutdown the d

  • Cannot find download for DS 5.2 P4 or P6 for Sol 10, x86

    Can someone get me a URL that allows me to download the Directory Server v5.2 p6? I gather that I need to download v5.2 P4 and patch to P6, but I can't even get the install package for P4! Every time I do I get transferred to the "Sun Java System Dir

  • IE7-Firefox viewing differences

    http://www.circl.pitt.edu/newsletter/2008-1/more_safar_center.html In IE there are spaces around the images which I put in under V space and H space in Dreamweaver 8. Those spaces do not show in Firefox. Does anyone know how to add spaces in with fir

  • After downloading firefox I can't open it because adobe says its damaged?

    My laptop had a virus and I uninstalled firefox. After I got the virus removed, I tried reinstalling firefox, but after the download is complete, adobe says it cannot open it. Do I need to reinstall adobe, or is there another program I can use to ope

  • Activate invoice evaluation for the company code.

    HI, I m doing vendor evaluation . want to make settings for main criteria "INVOICE". With sub criterias Quantity Variance  &  Price Variance. In order for evaluation results for the above two subcriteria to be generated automatically, you must activa