How to get Surround Sound to work With Itunes 7 and Stop Skipping

A common problem for surround sound with itunes 7 appears to come from Creative sound cards. The way to fix this problem is to right click on the volume icon in the taskbar and open the EAX Console. Open the CMSS 3D tab and check the box that says Enable CMSS 3D and set both CMSS and CMSS2 to 0% in the stereo focus slider. It should work. Remember to have the volume slider in itunes at 100%.
If that doesn't work then open the quicktime preferences in the controlpanel/quicktime. Then go to the audio tab, uncheck the safe mode box. Set the rate to 64 kHz and the size to 16 bit. Then set the channels to 5.1
This should all make it work, after hours of struggling i've found these successful settings and am loving it!
For those of you who have sound skipping during transitions----
Go to the preferences of Itunes and go to the Playback tab, disable the crossfading between songs and you should play skip free!!!!

bump

Similar Messages

  • Compaq Presario R3000 how to get the sound to work with Windows 7 RC

    1) Download     SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
    2) Run it, Create a directory  c:\ swsetup 
    3) Once all the Files are extracted DO NOT INSTALL
    4) Now Goto the Start Menu  Click on Devices and Printers, the Click on the Name you have called your  machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working, 
    5) Once your Machinename  you will see a general tab and and hardware tab select the hardware tab.
    6) Look for the Realtek ac 97  under the Device functions, select that and click properties,
    7) Now tab to the Driver, now click update driver,
    8) Select the option let me pick from a list of devices drivers, now click have disk
    9) Click on Browse  select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on  smwdmCH6.inf 
    10)Now the Soundmax Driver should come up select ok and  next. Now your Sound will work
    This question was solved.
    View Solution.

    I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
    It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4  2.80ghz    2.80ghz       1.12GB ram and im running on windows xp2 professional.

  • I cant get surround sound to work on itunes

    surround sound works on all my other programs like windows media players and for some reason itunes doesnt detect it! i really need this to gert working. sounds ways better with surround sound

    Did some tests...
    If I change the default audio device to the integrated audio device in the mainboard I get the same. Changing the bitrate in itunes or in the windows settings does not help either...
    Anyone has a similar problem?
    Or anyone has a similar setup and actually gets surround sound from itunes?
    I rather keep renting and buying films through itunes and not switch to some other shop...

  • Update to kichat: FAQ 2 - How to get my router to work with iChat?

    kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
    (Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
    Getting your router started with iChat.
    Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
    Glossary for this FAQ
    Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
    Routers seem to fall into two categories
    Those that work straight from the box. See Apple Article HT1787
    NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
    Even then some list that they need tweaks.
    and those that do not.
    This post will deal with what you may need to look at.
    First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
    Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
    In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
    Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
    Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
    The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
    Opening or Allowing ports. Several Methods not all devices have all of them.
    DMZ (Demilitarised Zone)
    This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
    Port Forwarding (also Virtual Server or Pin Holes)
    These settings are usually found in an Advanced setting.
    You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
    See this pic for an example of the description above.
    In this example shows that on some Port AND Protocols need to be listed.
    iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
    See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
    My Note 2:
    On the first link Note 1 under tables in that link would be better if it read:
    " 1. All iChat AV traffic is UDP -
    except for ports 5190 and 5298, which need to be open for both TCP as well;
    and 5220, 5222, which need to be open for TCP only. "
    Note 2
    GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
    UPnP Universal Plug n Play.
    This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
    By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
    They close after the application has finished with them on a timed basis.
    On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
    Trigger Ports
    Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
    The first port for incoming Video or Audio invites is port 5678.
    Pre iChat 4
    When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
    See this variation where only the ports listed above are completed.
    The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
    iChat 4
    The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
    At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
    Wireless
    Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
    Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
    Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
    Multiple devices
    Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
    Further Help
    I have found that this site (ADSLGuide) to be helpful.
    It is British based but I have linked you to the Apple Related Discussions Forum.
    Eliminating Problems on my Personal web pages.
    The ports and their function within iChat. (my personal Web pages again)
    This is not a step by step approach. You will have to read around the information about your device.
    Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
    Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
    Click on your device.
    Select iChat on the next page.
    Follow the info on the next.
    This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
    Gives you a chance to look at at pics to give clues to where some of these other things are.
    With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
    and to EZ Jim for his work on iSights on my web pages.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:51 PM Saturday; December 6, 2008

    kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
    (Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
    Getting your router started with iChat.
    Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
    Glossary for this FAQ
    Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
    Routers seem to fall into two categories
    Those that work straight from the box. See Apple Article HT1787
    NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
    Even then some list that they need tweaks.
    and those that do not.
    This post will deal with what you may need to look at.
    First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
    Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
    In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
    Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
    Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
    The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
    Opening or Allowing ports. Several Methods not all devices have all of them.
    DMZ (Demilitarised Zone)
    This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
    Port Forwarding (also Virtual Server or Pin Holes)
    These settings are usually found in an Advanced setting.
    You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
    See this pic for an example of the description above.
    In this example shows that on some Port AND Protocols need to be listed.
    iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
    See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
    My Note 2:
    On the first link Note 1 under tables in that link would be better if it read:
    " 1. All iChat AV traffic is UDP -
    except for ports 5190 and 5298, which need to be open for both TCP as well;
    and 5220, 5222, which need to be open for TCP only. "
    Note 2
    GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
    UPnP Universal Plug n Play.
    This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
    By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
    They close after the application has finished with them on a timed basis.
    On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
    Trigger Ports
    Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
    The first port for incoming Video or Audio invites is port 5678.
    Pre iChat 4
    When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
    See this variation where only the ports listed above are completed.
    The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
    iChat 4
    The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
    At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
    Wireless
    Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
    Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
    Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
    Multiple devices
    Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
    Further Help
    I have found that this site (ADSLGuide) to be helpful.
    It is British based but I have linked you to the Apple Related Discussions Forum.
    Eliminating Problems on my Personal web pages.
    The ports and their function within iChat. (my personal Web pages again)
    This is not a step by step approach. You will have to read around the information about your device.
    Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
    Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
    Click on your device.
    Select iChat on the next page.
    Follow the info on the next.
    This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
    Gives you a chance to look at at pics to give clues to where some of these other things are.
    With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
    and to EZ Jim for his work on iSights on my web pages.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:51 PM Saturday; December 6, 2008

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How to get this script to work with different browser

    Do you guys know how to get this script to work with mozilla firefox? 
    do shell script "open -a safari 'https://login.binck.nl/klanten/Login.aspx?ReturnUrl=%2fklanten%2fdefault.aspx'"
    tell application "Safari"
      activate
              tell document 1
                        repeat until ((do JavaScript "location.host") is "login.binck.nl")
                                  delay 1
                        end repeat
      do JavaScript"document.getElementById('ctl00_Content_Gebruikersnaam').value='sim';document.ge tElementById('ctl00_Content_Wachtwoord').value='password';window.open(document. g etElementById('ctl00_Content_LoginButton').href, '_self', 'true');"
              end tell
    end tell
    Thank you so much in advance:)

    That isn't possible. Firefox's AppleScript dictionary doesn't contain anything which can be used to manage JavaScripts.
    (63741)

  • How to get my Addon to work with the license key?

    Hi,
    Can someone tell me how to get the Addon to work with the license key?
    I've follow the steps as stated in this thread:
    [Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
    1) i've registered a BASIS key and get a 'BASISXXXXXX" string
    2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the  Add-On Indentifier Code
    3) then i paste the string to my source code
    which is the "XXX" of the sample code in that thread.
    static string AddonIdentifierString="XXX";
    int lRetCode=0;
    int errCode=0;
    string errMsg= string.Empty;
    string connectionStr ="";
    link = new SAPbouiCOM.SboGuiApiClass();
    connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
    link.AddonIdentifier=AddonIdentifierString;
    link.Connect(connectionStr);
    oApp = link.GetApplication(-1);
    vCompany = new SAPbobsCOM.CompanyClass();
    string cookie = vCompany.GetContextCookie();
    string conStr = oApp.Company.GetConnectionContext(cookie);
    vCompany.SetSboLoginContext(conStr);
    lRetCode = vCompany.Connect();
    4) then i add my add-on using manager role at Add-on admin
    5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
    what steps did i miss? Can someone please advise? Thanks
    ps : i'm coding in VB

    Hi,
    i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
    I hope it helps.
    Best regards

  • How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

    How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

    While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
    http://www.dslreports.com/faq/13600
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How to make the mobile application work with firewall and anti-virus ON

    Hi,
    I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
    Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
    Thank you

    Dear Rajesh,
    Create a policy in your fire wall to allow the port to send and receive data.
    I believe the port for the mobile should be port 8080 and 8443.
    And your license server port 30000 and 30001
    nd.Q

  • Why is my airportxpr only working with Itunes and not with another music program

    why is my airportxpr only working with Itunes and not with another music program??
    I can not select/see other outputs in my sound selector.

    You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
    for Windows - http://rogueamoeba.com/airfoil/windows/
    for Mac - http://rogueamoeba.com/airfoil/mac/

  • HT202274 Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions.   I recently upgraded to OSX Yosemite 10.10.1.  I also have an Apple ID that works with iTunes and would like to keep i

    Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions.   I recently upgraded to OSX Yosemite 10.10.1.  I also have an Apple ID that works with iTunes and would like to keep it as my primary.

    To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
    If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account.  To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How do i get my surround sound to work with my laptop while using a hdmi cable for the video

    I have a Sony surround sound  system hooked up that works great. My X-Box 360 works with it and I can get my HP G60 to play audio files through the surround sound system with a red and white audio jack plugged into the back of my surround sound receiver, the red and white audio cord goes to a 3.5mm headphone jack that i plug into the headphone plug on the front of my computer. The problem occurs when I hook my HDMI cable into my computer and connect it to my Samsung Flat screen, the HDMI sound takes over and wont allow the sound to go through the headphone jack. My tv does not have any audio output plugs, and my suround sound reciever doesnt have an HDMI input. Is there a setting on the computer that will allow me to over ride the HDMI sound and direct the sound through the head phones? or is there an app or tool that will allow my laptop to recognize my suround sound system plugged into my laptop? I have been to best buy, walmart, radio shack and even my local car audio store to ask about this issue and everyone has a different solution, and so far none of them have worked???????? sincerley frustrated! please help!?!?!?!?!?!?!?!?

    Hello JaeRoc48,
    I understand that the sound is not working.
    Go to start.
    Type Sound.
    Select sound.
    Select speakers as default.
    Click OK.
    Let me know how everything goes.

  • How can I get surround sound to work?

    I have a new TouchSmart 520z.  I believe it has an integrated soundcard.  When I purchased it I was told that surround sound speakers would work.  I purchased the Logitech 5.1 speaker system.  I don't have any color coded RCA receptacles on the system.  I have a mic and earphone receptacle on the left side and a sub and another receptacle just below it with a design on the rear that I am not sure of.  I placed the green RCA plug in the bottom receptacle on the back and get sound out of the two front speakers and subwoofer.  Don't know where to plug in the center and rear speaker plugs.  I have a feeling that this system does not support surround sound.  I configured my settings to surround sound 5.1.  Need some help.  Thanks.

    Did some tests...
    If I change the default audio device to the integrated audio device in the mainboard I get the same. Changing the bitrate in itunes or in the windows settings does not help either...
    Anyone has a similar problem?
    Or anyone has a similar setup and actually gets surround sound from itunes?
    I rather keep renting and buying films through itunes and not switch to some other shop...

  • How to get Surround Sound 7.1 output out of all speakers?

    Hi all...   I moved my system from Ubuntu recently and am having one small issue that I haven't been able to solve; everything else is working great and I'm about ready to move all of my other systems to Arch also, once I've solved this.  :-)
    The one nagging issue I'm having is with sound.  This is a fiber digital connection that was working on the ubuntu install and a couple other distros I play with, but I haven't been able to find the issue in Arch.  Sound comes out of only the front-left and front-right speakers.  When I do the sound test, it lists all of the other 7.1 speakers, but no sound out of anything other than the front 2 speakers.  I noticed that I don't have an asound.conf, so I was wondering if that might help or if it's not needed with Arch? 
    sound.conf contains the following:
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    /proc/asound/cards contains:
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xf9cf4000 irq 22
    arecord -L shows:
    default:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    null
    Discard all samples (playback) or generate zero samples (capture)
    If anyone has any pointers, it would really be appreciated.  I'm begging for help.  ;-)

    Thanks!  :LOL: - those were 2 of the url's I've been looking through (in addition to the alsa faq, some stuff on the ubuntu, gentoo and xbmc forums). 
    I've setup an asound.conf and am about to give that a test. 
    --edit--
    Well, that didn't solve it.  I'll have to keep trying.  :-(
    If anyone has managed to get surround sound working out of more than just the front 2 speakers, I'd love to hear how you did it.  ;-)
    Mine is connected via digital, so it's beginning to look like I need to set spdif up somehow.
    But... Now that I think about it, it 'should' be pretty easy since all I basically need is for it to force all raw audio out the fiber digital connection since the receiver actually handles all of the decoding (dang....it worked great in Ubuntu, now if I can just figure it out in Arch). LOL
    Thanks!!
    Last edited by jackmetal (2009-12-12 20:43:32)

  • MUSIC VIDEO -SURROUND SOUND NOT WORKING WITH 7.0

    My surround sound 5.1 does not work with downloaded music video playblack on windows iTunes 7.0. It used to work before I updated to 7.0. At first, my surround sound would not work with 7.0 for any iTunes songs, not just downloaded videos. However, that was corrected with the version 7.0.1 update. However, surround sound still does not work on videos I am trying to play back. This includes music videos that I purchesed both before and after downloading iTunes update 7.0.1. Has anyone got any suggestions for how to fix this problem so that my surround sound 5.1 will work on playback of the music videos?

    I have an Airport Express that is linked to my TV. It is interfaced to my Denon AVR. To get surround sound I had to just select the correct output option via the Denon. Then the speakers set up for SS would work.
    MJ

Maybe you are looking for

  • How do I use my wireless keyboard with my iPad?

    Not sure it can even be done, but I think I saw it being used.

  • Is there a way to get the list of ALL user exits in ECC 5.0 or 6.0

    Is this list published somewhere by SAP or can we get it from the system somehow? I m not talking about Enhancement or BADI's just user exits. Thanks for reading

  • Common mapping requirement

    A common requirement is sending a table from SAP to be output into a file. So if this is done using the RFC sender adapter and File receiver adapter (with content conversion), the only thing required is a mapping to remove the extraneous <item> node

  • Reduce Redo

    Hi Folks RDBMS: 11gR1 we have a finance controlling database in archivelog mode which performs huge calculations from time to time. the size of the db is 10gb, but when such a report run it generates ~100gb in a couple of hours. our goal is to reduce

  • Adding a 9124e to an existing 9509 Switch

    Guys: Config info: I have a HP C class blade enclosure, with 2 new 9124e's in it. I need to activate it,and figure on doing the following: Define 2 T ports on the 9124e, and connect them, to 2 Fx ports on the 9509.(1 9124 to each 9509 for redundancy)