How to get the connected screen off when connected
When I connect my iPod nano (4th gen - I believe) to both my car (through the AUX jack with a USB cord) and to my computer, the screen that says "Connected Eject before disconnecting" comes up and won't go away - even after it syncs and everything. In the car, it will plays some music but since I can't see my screen or any of my playlists I can't change the song or anything from the iPod. On the computer, I can click the eject button and the screen goes away and all if fine except that it obviously isn't connected and then won't sync. When the iPod isn't connected to the computer or the car it works fine. HELP!
Hello, ghost3947-
I am sure this would be quite frustrating! Let's take a look at that! Please ensure there is no debris in the HDMI port on the device. If dust, lint, etc get in that port, it can cause these sort of glitches. After you verify the port is clear, and it continues, please move on to a factory hard reset (http://tinyurl.com/9bgrztr) to resolve the concern. After the reset, the phone will walk you through activation and signing back into Google services. Keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
both touchpad and mouse are active even though the touchpad is disabled
I am saying that the touch pad still is active/turned on/ works, even though it is disabled according to the menu screen that I reach through control panel. It works all the time, in any program I am using. My latest attempt is to delete the software (Alps vers. 7.1207.101.225) but I see that has not worked either. I'm a poor typist and need to watch the keyboard and my thumbs touch the pad and send the cursor and current words somewhere other than the line on which I am trying to write. Very frustrating.[
-
On the app store app, I only get a blank/white screen. If I search for an app, nothing happens, only the blank/white screen. Does anyone have any suggestions on how to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Could someone please tell me how to get the voice turned off my iPad and to be able to move freely around on the screen?
A double-tap acts like a single tap and you need to use three fingers to scroll when VoiceOver is on:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.
http://support.apple.com/kb/HT4064 -
I get the blue screen loop when I try to start my Mac-Pro. How can I get it to boot up all the way? Can anyone advise me?
Which OS X is installed?
Troubleshooting advice can depend on that information. -
Im making a wedding video and cant figure out how to get the bridal music off my itunes and onto my computer.. Im using the windows movie maker
Marian,
Let's be clear on one thing here. The manual setting is an iPod setting, not an iTunes one. So, once you've set it to manual (and you appear to have done that correctly), then you can connect it to any number of computers without changing that setting.
"The grey thing occurs on one pc only"
This is the thing that I don't understand, if your iPod is set to manual, then it shouldn't happen on any computer. If you connect the iPod that is set to manual to this pc, and then click on it in the source listing, then you would be looking at the songs on the iPod, and they should not be greyed out. When you connect to the "other pc" under these same circumstances, they are not greyed out? -
I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12, I have had no problems in the past , I still have had no response to this post and it has been several weeks since initially posted, is there anyone awake at Adobe, can someone give me advice or is there total lack of interest once the product has been purchased I have been a customer of PSE for many year since PSE6 now on 12 but lack of response may cause me to rethink
Turn off your iPad and put it in recovery mode. Try to restore it via iTunes.
http://support.apple.com/kb/HT1808 -
How to Get the Debugger Screen in WEB Front end of SRM
Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj TiwariSetting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected] -
How to get the full image directory when i upload the image to web page???
hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html -
How to get the Application perform actions when exits?
How to get the Application perform actions when user clicks on the "X" icon in the top right hand corner?
OR
If i placed an Exit Button.... when actions that i need to use to allow my application to perform a certain action when it exits?
Thanksframe.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
// do your stuff here
});The WindowListener and WindowEvent can be found in java.awt.event package
//David -
I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?
Where did you get iDVD to put on your Mac? The downloading themes are no longer available from Apple. If you copied it from a Mac that had all the themes look for the iDVD folder on that Mac which should be in the HD/Library/Applications Support folder or the Users/Home/Library/Applications Support folder. Copy it to the HD/Library/Applications Support folder for Mt Lion.
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT -
How to get the PDF Document version when using Digital Signature
Hi,
I have a form which contains two signature fields.
When i sign the form the pdf document is saved as a version which can be seen by clicking the Signature Panel.
I need to get the binary of the versions stored in the form.
Please suggest me the how to get the version data from the form.
Regards,
S.V.atish KumarHi Mithun:
I think I have run into a similar issue and have not been able to find a resolution.
I have been trying to place three groupings of data and limit them to 15 rows; additional rows would print on a void check on a next page using the rtf template.
Earnings .............. Pre-Tax Deductions .........Taxes
<line 1 earnings> <line 1 pre-tax deductions> <line 1 tax dedcutions>
<line 2 earnings> <line 2 pre-tax deductions> <line 2 tax dedcutions>
<line 3 earnings> <line 3 pre-tax deductions>
<line 4 earnings> <line 4 pre-tax deductions>
<line 5 earnings>
<line 6 earnings>
The template works fine with these lists as nested tables until I add in the restriction and filler for the 15 rows for the first table. The data in the 2nd two lists does not appear once the limitation is added.
Check Writer (XML) - Issues with payroll check stub in rtf
As an alternative, I have been thinking adding the remaining line totals (over 15 rows) and adding a 16th row. However I have been running into an error when trying to use the code for-each-group.
*** XML-22056: exactly one of four group attributes must be present in xsl:for-each-group
Can you send me your template to review? My email is: Karen.Lacey(AT)paetec(DOT)com
Thanks!
Edited by: RedLacey on Dec 17, 2009 11:48 AM -
How to get the actual screen size
Hi,
I have to get the actual screen size of the cliend in an applet, if i use method
Dimension dmx = Toolkit.getDefaultToolkit().getScreenSize();
it does not gives the actual screen size, like the screen size will be different if the application bar ( where we have start button on windows ) is Auto hide, and will be different it is not Auto Hide, or some users ike to keep the application bar on right or left of screen or on top..
So how do we get the actual display size of screenHi,
I got how to do if using applet
in screen object of java script we have methods to get the available width and availabe size
screen.availWidth
screen.availHeight
here is the link for more info
http://developer.netscape.com/docs/manuals/js/client/jsref/screen.htm
http://forum.java.sun.com/thread.jsp?thread=275329&forum=57&message=1063410 -
When call a webservice opreation, it returns an array of complex type, sure, the calling is successed, but i don't know how to get the return values,
I have tried use Pendingcall.response & Pendingcall.getOutPutValues() in Pendingcall.onResult event function...
Waiting....Flash Lite doesn't fully support webservices, so you will find it difficult to use the full api set.
I suggest that you use SWX (swxformat.org) or simply HTTP requests for transactions.
We have a tutorial on use with ColdFusion here:
http://vimeo.com/6829083
Mark -
How to get the URL parameter value when navigating from JSP Page to portal
Hi All,
I have web Dynpro application with one button, while clicking that button It will navigate to JSP page as external window. In the JSP page I have a input field and Button.
In the JSP page input field I will enter some values and press submit button, it will navigate to Portal page by passing some URL parameter with values.
Once user entering to portal by default WD page displayed, the same WD page I try to get the URL Parameter which I have passed from JSP page, but I am not able to get the URL parameter value.
If same application running in without portal, I can able to get the URL parameter values. I am getting the URL parameter by interface view default inbound plug parameter.
How do we resolve this problem?
Regards,
Boopathi MHi
Please try these link might helpful for you
1.[How to call WebDynPro application from JSP |/thread/452762 [original link is broken];
2.[How to get the previous page url from abstract portal component? |/thread/1289256 [original link is broken];
3.[how to launch and pass a parameter |/thread/5537 [original link is broken];
Best Regards
Satish Kumar -
How to get the connection name of a Dataprovider
Hi,
I have a report with stored procedure dataprovider.Now I need to write a VBA script to get the connection name of this dataprovider.Is it possible to get the connection name of dataprovider?
Thanks
Rakul.What product are you using? Are you using Crystal Reports? Business Objects Enterprise? SAP product(s)? You sure you are asking in the correct forum?
Ludek
Maybe you are looking for
-
PM workorder printing problem -- *"Express document "Update was terminated"
Hi All, I have designed a PM workorder smartform. This form is getting triggered from the standard transaction IW32. There is a Z driver program and Z smartform. However when I am directly trying to print the this smartform(Order> Print>order) using
-
I'm getting the message "This copy of itunes is corrupted or not installed correctly. Please restall itunes" How do I do this without losing my itunes library? (I use Windows vista). Do I delete my existing itunes?
-
Generic Config reader X86 for Sun Mc 4.0
Hi What down mean this note for Generic Config reader X86 , and how can I enable it Note - Only machines with service controllers enabled can display these six new modules. In the absence of a service controller or when the service controller does no
-
Optimizing detail object syntax
Hello, reading the document about implementation best practices, I read that you can change the synthax like For example, for the object L01 Customer Key, change the generated select syntax: [Z_CUSTOM].[LEVEL01].[[2Z_CUSTOM]].[Value] to refer to the
-
[ANNOUNCE] JSP 2.1 and Faces 1.2 Public Review
We are pleased to announce the availability of the Public Review of the next versions of the specification for JavaServer Pages (JSP) and JavaServer Faces (Faces). JSP 2.1 is developed under JSR-245 and Faces 1.2 is developed under JSR-252. The two e