How to get the correct client certificate used in the two way ssl

how to export the certificate in browser to the correct client certificate format needed by the WLSSSLAdaptor?
I can export the certificate in browser to p12 or pfx format, but how to retrieve the private key from it and convert to PKCS#8?
anyone did this before?
Thanks

Hi,
Use the event after_user_command.When the user clicks any other buttons in the toolbar,this event will be triggered after the processing and you can handle the sub-total for % columns here.
Regards,
Archna Raja

Similar Messages

  • I bought two films on my ipod tough 4g ( normally comes up on my ipad if i have bought something on my ipod) but i dont know how to get the two films on my ipad without paying for them.

    I bought two films on my ipod tough 4g ( normally comes up on my ipad if i have bought something on my ipod) but i dont know how to get the two films on my ipad without paying for them.

    Movies work differant than TV shows, music and apps. With movies, to get them from one device such as an iPod Touch to an iPad, you would need to connect the Touch to your computer first and in iTunes under the file menu, hit transfer purchases. Next connect the iPad and you can sync the movie to the iPad.
    While the iPad is connected to the computer, in iTunes, click on the iPad in the left pane and when the screen loads, click movies and from there, you can select the movie that you want to sync.

  • How to get promoted properties from Request to Response in two way send port scenario.

    I have a requirement to access the promotes properties in response pipeline, these promoted properties are promoted in Orchestration and they are available in Send pipeline, but not available in Receive pipeline. Please help us if we have any solution for
    this issue.
    Thanks
    Ramachandra

    Hi Ramachandra,
    Obviously from above responses you would have got the point that this can’t be done out-of-box and you need to do custom. Also when you say “Get the message
    from DB along with context properties.”, you do agree with this point.
    One of the possible custom solutions is (Obviously in bespoken process, you can achieve it in many ways),
    When send the message out to a solicit-response port, store those promoted properties in db along with the “correlation key” which you can get from the context of the request message like
    “Correlation Token”  and “SPID”. So when the response comes back, you can either in the “inbound map” or in the receive pipeline (using custom component) populate/constructs the message by populating data from db, where will retrieve the
    “Correlation Token”  and “SPID” values of the response message (it will have the same correlation value as in the request message), so you can use the value of correlation sets to get the values from db.
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to Use a Certificate for Two Way SSL and another certificate for WS Security Header at Client Console Application(C# Dotnet)

    Hi,
    I want to consume a Java Web service from Dotnet based client Application. The service require one Certificate("abc.PFX") for Two Way SSL purpose and another certificate("xyz.pfx") for WS security purpose to be passed from client Application(Dotnet
    Console based). I tried configuring the App.config of Client application to pass both the certs but getting Error says:
    Could not establish secure channel for SSL/TLS with authority "******aaaa.com"
    Please suggest how to pass both the certs from client Application..

    Hi,
    This problem can be due to an Untrusted certificate. So you need just full permissions to certificates.
    And for more information, you could refer to:
    http://contractnamespace.blogspot.jp/2014/12/could-not-create-secure-channel-fix.html
    Regards

  • How to get the real client ip from HttpClusterServlet?

    Hi All,
              WL 6.0 sp2 on Linux.
              When HttpClusterServlet is used, invoking HttpServletRequest.getServerName()
              will return the server name of the proxy server where HttpClusterServlet
              installed,
              rather than the actual client's ip which we are interested in.
              Anybody knows how to get the correct client ip through the proxy server? Any
              workaround? Or does a patch exist?
              Any help will be appreciated,
              Lynch
              

    Sorry I mean HTTPServlet.getRemoteAddr()
              "Lynch" <[email protected]> ¼¶¼g©ó¶l¥ó
              news:3baea0c5$[email protected]..
              > Hi All,
              >
              > WL 6.0 sp2 on Linux.
              >
              > When HttpClusterServlet is used, invoking
              HttpServletRequest.getServerName()
              > will return the server name of the proxy server where HttpClusterServlet
              > installed,
              > rather than the actual client's ip which we are interested in.
              >
              > Anybody knows how to get the correct client ip through the proxy server?
              Any
              > workaround? Or does a patch exist?
              >
              > Any help will be appreciated,
              > Lynch
              >
              >
              

  • How to get the password of a password protected Excel Sheet using java/jxl

    Hi ,
    how to get the password of a password protected Excel Sheet using java / jxl program.
    plz any one help me .
    Ramesh P
    [email protected]

    If they've implemented the password system correctly there probably isn't a way of getting the password at all.

  • How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    Hi,
    Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
    Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
    But this only works if the URL i give points to a static html page.
    So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
    Have u ever tried to do some things like this?
    Rahul

  • I have recently had to fire my web designer who was using iWeb.  Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro.  Is there a way?

    I have recently had to fire my web designer who was using iWeb.  Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro.  Is there a way?

    Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility.  You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply.  You DO NOT create a shape as you say - you use the html snippet and place your code in there.
    There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler.  If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish.  However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
    As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
    Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
    Ask again.  I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice.  As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities.  At least this way, if he just gives you the published version of the site, you have some way of opening it.
    You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

  • How to get the IP of the client when TCP connect in the server

    How to get the IP of the client when TCP connect in the server.
    The only parameter got from the connection is connectionID.
    Solved!
    Go to Solution.

    I guess you're using "TCP Wait on Listener" on the server. This returns the remote address and port (as optional outputs).

  • I use iPhoto and want to know how to get the 'key photo' i select on my MacBook Pro to be the one that gets used on my iPhone when i sync them. Any ideas? also, i want the events to appear in the order i choose on my MacBook too

    I use iPhoto and want to know how to get the 'key photo' i select on my McBook Pro to be the same one that gets used on my iPhone 5s when i sync. i also want the events to appear on the iPhone in the same order i have them on my macbook. any ideas there too?

    Killerfinch wrote:
    My new yahoo account nestles comfortably in iCloud on the mine iPad.
    No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
    But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
    Get the correct settings for your account from Yahoo and set it up manually.
    By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
    That would depend on what you are trying to do.

  • How to get the values from struct data type using java code..?

    Hi ,
    I am newer to java.
    we are using oracle database.
    How to get the data from struct data type using java code.
    Thanks in Advance.
    Regards,
    kumar

    Hi Rajeev,
    To retrieve a FilterContainer you will need to traverse the report structure:
    ReportStructure boReportStructure = boDocumentInstance.getStructure();
    ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
    FilterContainer boFilterContainer = null;
    if (boReportContainer.hasFilter()) {
         boFilterContainer = boReportContainer.getFilter();
    } else {
         boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
    Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
    Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
    Hope this helps.
    Regards,
    Dan

  • How to get the values and attributes of Longlived processes by using ProcessID.

    Hi Experts,
    For  every process we creates, LC ES2 creates processID.
    we know that if you creates  a long lived process, all  the  values which are in proces will be stored some where  in DB.
    Here my requirement is by using  processID I need to get all/some values/variables stored in database.
    I am not able to get values using processID. Here I don't have clue on  how to get the values.
    Please tell me  how to get the same by using  Process Management. Link/guide would be helpful
    Thanks
    Praveen.

    Searchable means you can put a filter criteria on it (e.g. where amount > 50000)
    Visible means you can add have this column returned as an output (and therefore you can add it as column in listview and see it in Task Details).
    These two attributes were provided so that queries could be done against the process variables, but the exact contents of the variables are not allowed to be seen.

  • How to get the most current file based on date and time stamp using SSIS?

    Hello,
    Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
    Thanks
    thx regards dinesh vv

    hi simon
    i excuted this script it is giving error..
       Microsoft SQL Server Integration Services Script Task
       Write scripts using Microsoft Visual C# 2008.
       The ScriptMain is the entry point class of the script.
    using System;
    using System.Data;
    using Microsoft.SqlServer.Dts.Runtime;
    using System.Windows.Forms;
    namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
        [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
        public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
            #region VSTA generated code
            enum ScriptResults
                Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
                Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
            #endregion
            The execution engine calls this method when the task executes.
            To access the object model, use the Dts property. Connections, variables, events,
            and logging features are available as members of the Dts property as shown in the following examples.
            To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
            To post a log entry, call Dts.Log("This is my log text", 999, null);
            To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
            To use the connections collection use something like the following:
            ConnectionManager cm = Dts.Connections.Add("OLEDB");
            cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
            Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
            To open Help, press F1.
            public void Main()
                string file = Dts.Variables["User::FolderName"].Value.ToString();
                string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
                System.IO.FileInfo finf;
                DateTime currentDate = new DateTime();
                string lastFile = string.Empty;
                foreach (string f in files)
                    finf = new System.IO.FileInfo(f);
                    if (finf.CreationTime >= currentDate)
                        currentDate = finf.CreationTime;
                        lastFile = f;
                Dts.Variables["User::LastFile"].Value = lastFile;
                Dts.TaskResult = (int)ScriptResults.Success;
    thx regards dinesh vv

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • How to get the context data using java script in interactive forms

    Hi All,
    How to get the context data using java script in interactive forms by adobe,  am using web dynpro java
    thanks.

    Hi venkat,
    Please Refer this link.
      Populating one Drop-Down list from the selection of another Drop-down list
    Thanks,
    Raju.

Maybe you are looking for