How to get the latest creditlimits in the reporting

Hi All,
Can anybody give me an idea on how to  get the latest credit limit values per each customer in the report.
I have below requiremnt.
I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube  which is credit management view having all the customer numbers .
This credit management view is master data info object having credit limit key figure as attribute.These credit limit  are per each customer.
So we need these credit limits in the report  as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
one more thing these credit limits should roll up correctly at the HTR level.
One HTR having number of customers .
for example HTR 100 can have  customer number 200,300,400.
Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
Example below :
Cube DATA :
HTR         Customer     Doct number  Credit managment view
100            200                10001             200
100            200                10002             200
100            300                10004             300
100            300                10005             300
100            400                10006             400
100            400                10007             400
100            400                10008             400
Master data tabel (P Table)(Credit managment view)
Credit managment view       Credit limits
200                                           1000.00
300                                           50000.00
400                                           90000.00
Please remeber :
We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .
Edited by: sirisha Nekkanti on Oct 30, 2008 6:27 PM
Edited by: sirisha Nekkanti on Oct 30, 2008 6:35 PM

This is duplicate of
how to get the latest credit limit values per each customer in the report.
thread.

Similar Messages

  • At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

    At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
    == This happened ==
    Every time Firefox opened
    == Several weeks ago.

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the ''updates'' and ''updates\0'' folder:
    Vista/Windows7:
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
    C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
    %LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

  • I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

    I have the trial version of the latest premiere and the audio works in that but not cs6

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -especially your sound hardware, and the details of your video

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

    My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
    So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
    I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
    Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
    I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
    Kind Regards

    iTunes 11
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

  • DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

    Hi Experts,
    Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
    So, I am keeping a single character just SPACE at the END of each record.
    Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
    Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
    But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
    Am doing every thing same in both cases.
    So,
    1 - Why its happening in case of UNIX file?
    2 - How to get a SINGLE SPACE  at the END in the downloaded file from UNIX?
    thanq

    Hi,
    I don't know if this works:
    perform SET_TRAIL_BLANKS(saplgrap) using 'X'.  
    perform SET_FIXLEN(saplgrap) using '0' '060'.   "put length of your line from-to
    ... download ...
    It will put space at the end of your line, according to the length.
    Hope it works,
    Chang

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • How to get values/data stored in the database into a list-item.

    how to get values/data stored in the database into a list-item.
    i tried to make a list item without any values assigned to it...but i got the below error.
    FRM-30191: No list items defined for required poplist.
    or
    FRM-32082: Invalid value for given item type.
    List EMPNO
    Item: EMPNO
    Block: EMP
    Form: MODULE5
    FRM-30085: Unable to adjust form for output.
    then according to some docs, i tried the the following for the trigger
    when-new-form-instance
    declare
         rg_name varchar2(40) := 'emp_rec';
         status number;
         groupid recordgroup;
         it_id item;
    begin
         it_id := Find_Item('empno');
         groupid := create_group_from_query(rg_name, 'select empno from emp');
         status := populate_group(groupid);
         populate_list(it_id, groupid);
    end;
    but yet didnt work... :(
    so how the heck do i get values fetched from the database table into the list item?

    for list items you need to values in the record group, one is the shown value and one is the returned value.
    Check out the online help for the populate_list built-in.
    You'll need something like select ename,ename from emp as the record group query.

  • I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

    I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

    You can't.
    Change your iTunes (Apple ID) password along with any other password that was stored in the iPod.  If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number).  If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
    The only real protection you have is with the personal information on the device rather than the physical device itself.  This requires action before the device is lost/stolen.  If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Flash Player. Even though it's already installed. How can I fix that?

    After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
    Can I fix that just doing the upgrade for the Yosemite?

    Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
    Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
    I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
    This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
    Thanks fore responding to my question.
    DFelice

  • How to get a check box on the selection screen

    Hi all
    can any body tell me how to get a check box on the selection screen

    parameter: pa_check   as checkbox.
    To define the input field of a parameter as a checkbox, you use the following syntax:
    PARAMETERS <p> ...... AS CHECKBOX ......
    Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
    If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
    REPORT DEMO.
    PARAMETERS: A AS CHECKBOX,
    B AS CHECKBOX DEFAULT 'X'.

  • Every time I try to download the new version of Adobe Flash Player it saves as a .txt file and I do not know how to get it to save in the correct format.

    Every time I try to download the new version of Adobe Flash Player it saves as a .txt file and I do not know how to get it to save in the correct format.

    Please post in the Adobe Flash Player forum.

Maybe you are looking for

  • Photos still in iCloud with no connection

    When I disconnect from wifi and cellular I can still see the photos that I have in iCloud. Its not a problem but I thought this photos should disappeared since I don't have an internet connection. How does it work? thanks!

  • Validation in F110 or User exit

    Gurus, Is Validation called in F110 (Automatic Payment Run) Transaction ? If yes then how can i implement the following Validation ? In F110 during Payment Proposal or Payment run time ,We have to allow specific user to process the Payment for the co

  • PCI6534 not reading the data correctly

    Hi, I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

  • 2-D image averaging

    My 16-bit ADC supplies a stream of "Raw 1D I16" data at 1MS/s to fill a 2-D array to form an image at a rate of 4 frames/sec. To get a better image I have to average 10 frames before displaying it to the monitor and then storing this "averaged" 16-bi

  • Web Gallery does'nt stop updating & exporting

    Everytime I click on the Web button, Lightroom sems to go directly ( without any possibility for me to re-arrange my photos position or new photos ) to updating / uploading mode! Is there a way to have this 'web' function stop so I can decide what ge