How to get the latest Version of Interface Mapping

Hi
I made some changes in IR, and when I am sending the Request...as per Monitor..it is not picking up the latest Interface Mapping Object. I am checking it from Trace in Monitor and then cross checking it with Object Version ID in Repository for Interface Mapping.
I cleaned all the cache as well (from Design, Config and also from Admin), but still I am seeing old version id.
Any suggestion....?

Right now I do not have access to XI system but I remember these are the places you can check.
Did you go to http://host:5<sysnr>00/rep/start
There click on the Administration, and log on using XISUPER. Click on Cache and there is a drop down for mapping programs list. Check that out.
regards
SKM

Similar Messages

  • How to get the latest versions of Internet Explorer t

    We are running Single Primary Site with SCCM 2012 R2. 
    I
    cant seem to find out how to get the latest versions of Internet Explorer to be included in software updates?  Do you have to download this separately and install manually?

    Like Henrik said, make sure you have the Classifications selected that you want to address. IE 11 is the current browser, that was added to the catalog a few months back. If you are searching for this month you wont find it.

  • How to get the latest version from DTR

    Hi all,
              I have all the latest code in my system 1 and i checkined the activites.Now i want all that code in my system 2.
    Now i used sync from sources to get the lateset code.
    But i am not able to get all the files and the build is getting failed.
    Can any one plz help me out
    Regards
    Padma N

    Hi,
             Inorder to get the lateset version from DTR i used the procedure given by you.But at the second time if i want to get the lateset version from DTR wat to do??I didnt find the option of create project again because i already have to project in my workspace.
    wat to do inorder to get the lateset source code from DTR 2nd time???
    Regards
    Padma N

  • How to get the latest versions of SCOM MP

    Hi,
    Last week I installed Update Rollup 5 on my SCOM 2012 SP1. There are many Retail MPs in this SCOM instance like IIS, SQL , DNS, DHCP, Operating Systems, HP, Dell, etc..
    I wanted to know how will I get notified if there are newer versions of these MPs available.
    I know that I can download them from the MP Catalog center through SCOM console but If I don't get some information on which newer MPs are available then will I have to manually check in the catalog if newer versions are available or not.
    Thanks, S K Agrawal

    I got the answer I think -
    1) In SCOM console, click on Download MP.
    2) In the MP catalog page, under 'View' select 'Updates available for installed MPs'.
    3) This will provide the list of all MPs that needs to be updated.
    Thanks, S K Agrawal

  • How to get the latest version of FCPX? new iOS make it doesn't work :(

    i really need help about this

    FFCP is a Mac application. It works with OS X not iOS and not on mobile devices.

  • Code to get the latest version of an entitiy using wcf?

    Hi,
    I am using WCF services to get entities in MDS. I want to get the entities only in the l;atest version. Can you please share code/api asto how to get the latest version of a model in MDS using WCF?
    Thanks

    You can use MetadataGet API to get all versions associated with the model and then sort them by CreatedDateTime or
    UpdatedDateTime depending how you define "the latest version" .
    The code would be like :
    var mdGetRequest = new MetadataGetRequest
    SearchCriteria =
    Models = new Collection<DC.Identifier>()
    new DC.Identifier() {Name = "Account"}
    ResultOptions = {Versions = DC.ResultType.Identifiers},
    // Call MDS service
    MetadataGetResponse mdGetResponse = MyServicesApiUtility.MdsService.MetadataGet(mdGetRequest);
    if (mdGetResponse.OperationResult.Errors.Count == 0 && mdGetResponse.Metadata.Versions.Count != 0)
    var versions = new List<DC.Version>(mdGetResponse.Metadata.Versions);
    versions.Sort(
    (ver1, ver2) => ver2.AuditInfo.CreatedDateTime.CompareTo(ver1.AuditInfo.CreatedDateTime));
    return versions.First();
    else
    throw new Exception(string.Format("No version related to model {0}.", "Account"));

  • Why Can't I get the latest version of Adobe Muse?!

    After reading countless forums, I came to the conclusion that if I have a 32-bit operating system, I am unable to get the latest version of Muse? Can somebody please confirm this for me or at least give me instruction on how to get the latest version. Currently I have version 7.4 Build 30, CL 784238 AIR Runtime: 17.0.0.144
    I have tried countless workarounds:
    1. Uninstalled & re-installed Adobe Creative Cloud
    2. Deleted the OOBE.db files
    3. Run Adobe Creative Cloud Utility Tool
    4.Manually installing Adobe Muse (separate from the Creative Cloud)

    System requirements | Muse

  • I need to get the latest version of Adobe Reader.  Is this still free?  How can I receive automatic upgrades?

    I need to get the latest version of Adobe Reader.  Is this still free?  How can I receive automatic upgrades?

    Of course the free Reader is still available: http://get.adobe.com/reader/
    To get automatic updates set the Updater in the Reader Preferences.

  • I am running on OS X 10.5.8, how to I get the latest version of iCal??? I have my computer since 2009, I am running on OS X 10.5.8, how to I get the latest version of iCal??? I have my computer since 2009

    I am running on OS X 10.5.8, how to I get the latest version of iCal??? I have my computer since 2009, I am running on OS X 10.5.8, how to I get the latest version of iCal??? I have my computer since 2009

    You need to install a newer Mac OS X version to get a newer version of iCal. If you're using a PowerPC Mac, you can't upgrade the OS or iCal further.
    (60198)

  • How do i get the latest version of safari on my macbook pro? where is this in the apple store??

    How do I get the latest version of safari on my macbook pro?

    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • How do I get the latest version of iTunes on my pad?

    How do I get the latest version of iTunes on my iPad?

    Any reference to a newer version of iTunes is actually referring to the version on your computer. The version on the iPad is set by the iOS.

  • How to Find the Latest Version of Cluster Binary Files available at Microsoft website

    How we can find the latest version of Cluster binary files available for download at Microsoft Website and which Cluster Binaries should be update to make the Cluster services stable healthy.

    @AnatolySV : I believe you need to put some efforts to understand what he is asking.
    You may find the latest version of Cluster Binaries by entering the required keywords for Microsoft Failover Clustering. Some of the main Cluster binaries(Keywords) are:-
    Clusres.dll (For Cluster Resources like Disk, Application or Service, Cluster IP)
    Clussvc.exe (Cluster Service)
    TCPIP.sys (If the Storage is presented to the cluster Nodes via ISCSI Network).
    MPIO.sys / ISCSIprt.sys (If we are using Multipathing for the disks to be presented).
    RHS.exe (Resource Host Subsystem)
    So, the Answer to your question is: You need to enter the binary name "Clusres.dll" and mention the Operating System you want to install your binaries to "Windows Server 2008 R2 Sp1" on Bing (Preferred for Microsoft Hotfixes). In Result you will get the
    list of hotfixes for clusres.dll
    You need to try this multiple times in order to get the latest version as Microsoft does not have a single Link.
    Hope this answers your query. Feel free to leave a message incase you need more help.
    Maybe) 
    But hey, you`ve got +1 from me for clarification) 
    Anyway, I still think that the initial question could be more clear and exact. 

  • How to get the last version of flash in MSI format automatically?

    How to get the last version of flash in MSI format automatically?
    Roberto Neigenfind
    Bravo Tecnologia
    www.bravotecnologia.com.br

    Hi Barbara,
    Flash Professional CS5.5 is a 32-bit application which can be installed on computers with either 32-bit or 64-bit operating systems.
    You can purchase this by Adobe's backward Licensing policy :
    " Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA. "
    Please check the doc : http://www.adobe.com/volume-licensing/policies.html

  • I have a mac  book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

    I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

    10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
    You can get it only by phone now from Apple.
    In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
    For other countries, check here; http://support.apple.com/kb/HE57
    Don't forget to ask for Sales; the tech support guys can't help.
    If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
    To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
    Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

  • How to get the latest credit limit values per each customer in the report.

    Hi All,
    Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
    I have below requiremnt.
    I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
    This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
    So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
    one more thing these credit limits should roll up correctly at the HTR level.
    One HTR having number of customers .
    for example HTR 100 can have customer number 200,300,400.
    Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
    Example below :
    Cube DATA :
    HTR Customer Doct number Credit managment view
    100 200 10001 200
    100 200 10002 200
    100 300 10004 300
    100 300 10005 300
    100 400 10006 400
    100 400 10007 400
    100 400 10008 400
    Master data tabel (P Table)(Credit managment view)
    Credit managment view Credit limits
    200 1000.00
    300 50000.00
    400 90000.00
    Please remeber :
    We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
    one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .

    Create a formula variable of type replacement path with reference as attibutes of Credit management view and choose your key figure credit limit,say zcredit.
    Now create a formula or CKF and use zcredit.
    This should display the credit limit in your report as normal key figure.
    I didnot get this part "one more thing these credit limits should roll up correctly at the HTR level.", may be the above will solve this too.Try it.
    Hope this helps.

Maybe you are looking for

  • IMovie '09 keeps crashing and now I can't export my work.

    I've been having nightmares with iMovie '09 until I've upgraded my OSX to Yosemite. It seemed to be working fine since then. Now, out of the blue, all the issues are back: iMovie has crashed at least 20 times in the last 1 hour while doing very simpl

  • Weird Errors in PDF Printing! Please help!

    Hi All, I am facing two different problems in PDF printing. Any suggestions would be welcome. I would really be glad to understand what is going wrong. Problem 1: I have a page with 2 report regions, each with its own header. My PDF report was workin

  • Looking for Source Codes

    hi everyone! I am looking for source codes with the following characteristics: - significant data processing (like fft or image processing algorithms) - use of just a few classes and/or packages (it must not use awt or swing) - code is not so big (20

  • Calling SQL*Loader from OCCI

    Hi All, I need to access SQL*Loader from C++. I know there is an interface for OCI to access SQL*Loader. I also know there is a gnu project of a c++ wrapper to the OCI-SQL*Loader interface (odpd). According to the OCCI documentation it is just a C++

  • Compress files: NEED HELP

    does anyone know how to compress mp4/mp3 files without compromising the sound quality too much? As soon as I go to 64kps it sounds rubbish.