How to get the list of users who has access for list of tcodes.
How to get the list of users who has access for list of tcodes.
Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.
Similar Messages
-
List of users who has access to current community
Hi,
Is there an API which provides list of users who have access to current community in ALUI? Will there be huge performance impact in retrieving the list of all users who have access to current communty?
Thanks
SampathSorry,
I am not quite following you..
Users can only view a community if the permissions exist for that specific community. I dont understand what do you meant by
"I need to let user type a name and show his/her user ID from the list of users who have access to the current community".
Are you trying to look at user permissions based on a list of communities existing in the portal? The user can't even get to that community if he doesn't have permissions. -
How to get the name of user who last changed the settings of process chain
Hi All,
I have a process chain which runs daily. At one atep it would load data till PSA then there was a separate process to update data from PSA. But recently someone changed the settings and data is loaded in PSA and data target in parallel. But the process update data from PSA is also there still and as a result giving error as data already reached infocube. I wish to know who changed the settings. I searched and found about tcode SGL1 but not getting any fruitful result. Can anyone pls suggest anything.
Thanks in advance,
SanandaHi There,
In your case, nobody has changed the settings in process chains. However, it appears that someone has changed the Processing mode in the Info package. Since now the infopackage has already run after the change was made, I don't think there is any way to find who has changed the setting in the infopackage.
However, the solution would be to just switch back the processing mode from "PSA and Data Targets in Parallel" to "Only PSA".
Regards,
Hemant Khemani -
How to find out list of users who have access to particulat SID
HI
How to find out the list of users who has access, to a particular SID?
Satish.jurjen,
Thanks for replying, actually i was trying to navigate and execute the report using, SUIM...
could you help me to find out the list of users who has access to a particular system.. using SUIM.
satish. -
How can I find out the list of users who has the access to IT 0008
All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS -
I have a requirement where I have to give the list of users who can access a specific computer define in AD.
I am new with PS.
Do you have a script to list users that can access a computer object of AD ?
I have executed the following script but it does not give me the access rights of who can access the computer 'computername'
How can i have this information. please help
Import-Module activedirectory
$computer=get-adcomputer "computername" -properties ntSecurityDescriptor
$omputer.ntsecurityDescriptor.Access | select-object -expandproperty IdentityReference | sort-object -uniqueI would say that, since the OP has so little info, there are no policies in use. It there were then this question would never be asked the way it is being asked.
I had a client call with a letter from their insurance company; an accountant with malpractice insurance. THey asked the same question inmuch the same way. "What computer can you users access?" The question should be more like
"Do you have a policy that restricts access to computers and do you audit for compliance?"
I have had other clients whose insurance asked the question in that way. It produces a better view of what should be happening and how to show compliance.
I recommend that companies being asked these questions by their legal departments or insurance companies should contract with a god computer security consultant to assist with answering these very tricky questions. Of course if it is just you boss's
curiosity then you may need to discuss his requirements with him in more depth.
¯\_(ツ)_/¯ -
How to get the room id & user id in our component
Hi Experts,
Collaboration -> Rooms -> Room Directory
It will show the available rooms
Select restricted room tab in that.
That will show the restricted room list, if you are not a member of the room you can request the room by clicking context menu of the room and select the Request Membership option. Then it will send the mail to the owner of the room.
In that UI commend they mapped with the roomid and userid.
I need to know how to get the room id & user id in our component.
How to get the Room Id dynamically?
Can anybody help me for this?
Helpful answers will appreciate.
Thanks and Regards,
Kathiresan RHi Kathiresan,
you can get the Room ID and the User ID over the API.
Getting User ID within WebDynpro application:
IUser user = WDClientUser.getCurrentUser().getSAPUser();
String logonId = user.getUniqueId();
Getting User ID within custom Portal Component:
IPortalComponentRequest request = (IPortalComponentRequest) httpRequest;
IUser user = request.getUser();
String logonId = user.getUniqueId();
Getting Room Id of a user who belongs to this room:
IUser user = request.getUser();
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
IRoom[] myRooms = roomsAPI.getAllRoomsForUser(user);
String roomId = "";
for (int i=0; i<myRooms.length; i++) {
IRoom room = myRooms<i>;
if (room.getName.equals('nameOfRoomToFind')) {
roomId = room.getId();
Greets
Denis -
How can I list all users who have access to a particular TABLE or VIEW
Hi,
Can someone tell me how I can list all users who have access to a particular TABLE or VIEW.
AbhishekHi,
Take a look on this link: http://www.petefinnigan.com/tools.htm
Cheers -
How to get the ESS & MSS users in ECC 6.0 into portal
Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
DayaHi,
You need to have SSO in between ECC and portal and use ABAP engine as your UME.
then ECC users can directly login to portal using the same user id and password.
Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
Thanks,
gopal -
How to get the active application users IP address in R12 by sql command
Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein -
How to get the name of User NT
I need to get the name of user NT that access to my web site (intranet),
I was used the class NTSystem but this return the name of user NT of the server, but I need the current user that access to the site.
Thanks a lot!
yaguipnot sure if this is what you're after, but it returns the os user of the jvm..
try this...
System.getProperties().getProperty("user.name");
Takis -
List of users who have authorization for a particular transaction?
Hi All,
Can anyone guide me how to know the list of users who have authorization for a particular transaction?
I need this to find out the list of authorizations that are obsolete ,when the particular trnsaction is obsolete in an Upgrade process.
Thanks in advance.we can get the list of users for a particular transaction as below.
get the tcode and place in AGR_TCODES and we get the list of roles .
loop the roles and pass each role to AGR_USERS and we get list of users for that role.
finally we got the list of users for that tcode. -
List of users who have access to multiple mailboxes
Hi,
I got the list of around three hundred generic mailboxes
Please help me with the command which can help me to get the report of all users who has access on those generic mailbox.Hi,
If you want to export these permissions to a csv file, you can use the following cmdlet:
Get-Mailbox -ResultSize Unlimited | Get-MailboxPermission | Where {$_.user -notlike "NT AUTHORITY\SELF" -and $_.IsInherited -eq $false} | Select Identity,User,@{Name='Access Rights';Expression={[String]::join(‘, ‘, $_.AccessRights)}} | Export-Csv
C:\MailboxAccess.csv -NoTypeInformation
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Generate a list of users who has admins rights in BO XI.
Post Author: bstn82
CA Forum: Administration
Any one has an idea how to produce a list of users who has admins rights?Post Author: TAZ
CA Forum: Administration
launch query builder from the admin launchpad
enter this query
select * from ci_systemobjects where si_parentid=19
this will give you a list of all the members of the administrators group.
You can experiment with query builder and possibly ask for help in the DEV forum if you need to write a more complex query.
Regards,
Tim -
My phone will not send emails even after the IOS 8 update. I continue to get the message of user name or password for my email are incorrect.
Did you try to delete the mail account, restart the phone and add the mail account again?
iOS: Setting up an email account
This article provides morse tips, if you can't connect or you receive an error in Mail.
Maybe you are looking for
-
Prep for Migration from PC to Mac (Ext Drive)
I plan to purchase a Mac desktop in a few months. I need to backup my PC files (cause I never have!) and create some hard drive space on my sluggish PC. Can I do the following: 1) Use an external hard drive and back-up all files 2) Upon Mac purchase,
-
SAP Menu disappeared in GUI 7.10p4 after update from rel.6.20
Hi Guys, you are my last chance! I'm going to update the SAP GUI in all our PCs (about 1500) from rel 6.20 to 7.10 Patch 4. Our PCs are WinXP SP2. This is a requirement due to a system upgrade from 4.6c to ECC6. I made some tests and I'm facing this
-
Permissions and memory problems with Yosemite HELP!
I have had nothing but problems since I upgraded to Yosemite. My graphics programs crash and run impossibly slow. I have to restart constantly to clear maxed out memory. My internet speed drags to a crawl, and I constantly have to repair permissions
-
Submit Back ground job with error log
Hi Gurus Can anyone help with Back ground job with error log. i want put all the error logs in to 1 internal table and submit the back ground .how can i do that .please help me
-
SQL Organise via dates and match via logic
<p> Dear All, <strong> My apologies I missed out what makes it a little hard. Please read below:</strong> I have a a table like these: custDetails custID custName 11112 John Smith 11113 Jane Smyth 11114 Barry Bell 11115 Jonny Ball faultDetail custID