How to get the owner name for the file in ftp using abap ?

Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa Vanarchi

Hi
dont you  have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no  clarity.
Plz elaborate your requirement  before anybody can help.
Regards
sateesh

Similar Messages

  • How to get a server name through the load balancer

    Hi.
    I'd like to get the server name where is my application installed. There are some servers and clients access there throuth the load balancer. When I try to get it with request.getServerName(), I get the virtual address of the load balancer.
    Any suggestions?
    Thanks.

    Dear Sikindar;
    THanks for your cooperation, but I believe that these Tcodes will eb helpful if I know the table name, actually we don't know its name and that's what I'm asking about, how can I get the table name for the ABAPer?
    Appreciating your cooperation.
    Best Regards;
    Lobna

  • How to find out the printer name for the Idoc

    Hi guys
    I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
    Regards
    Madhoo

    Hi,
    For ALE/IDOC the  medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
    Regards,
    Nagaraj

  • Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

    Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

    Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
    Attachments:
    channel_name.JPG ‏69 KB

  • How to get mobile model name for different types mobile devices

    Hi,
    I have checked few thread in this forum about getting mobile model name at server. So far, i noticed the mobile name is set manually in the midlet as user-agent .
    HttpConnection connection = null;           connection = (HttpConnection)Connector.open(url);          connection.setRequestMethod(HttpConnection.POST);          connection.setRequestProperty("User-Agent","Nokia7110 Profile/MIDP-1.0 Configuration/CLDC-1.0");
    i retrieve the header information from servlet like below :-
    String userAgent = request.getHeader("User-Agent");
    How to get mobile model name for different model devices , not by manually adding the model name in midlet?
    Thanks in advance :-)

    Hi,
    In J2ME there is no method to get the model number from the device. how ever you can use the APIs provided by the device manufacturer if available. But still the APIs will not work with devices from other manufacturer or sometimes it will not work with the devices of the same manufacturer if the API is not supported. so it is better to send the device model name through the header.

  • I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!

    I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!
    Partner Type
    Partner Type Desc
    Partner no
    Partner Name
    Partner Address 1
    Partner Address 2
    Partner Address 3
    Partner Address 4

    Hi Jyotirmoy ,
                        You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
    Sirish

  • How to get a organization name for a particular user using API's

    Hi alll,
    How to get a organization name for a particular user using API's

    You need to do something like this:
    SearchCriteria criteria = new SearchCriteria("User Login", "XELSYSADM", SearchCriteria.Operator.EQUAL);
                   UserManager usrService = oimClient.getService(UserManager.class);
                   Set<String> retAttrs = new HashSet<String>();
                   retAttrs.add(UserManagerConstants.AttributeName.USER_ORGANIZATION.getId());
                   List<oracle.iam.identity.usermgmt.vo.User> users = usrService.search(criteria, retAttrs, null);
                   System.out.println("ORG KEY :: " + users.get(0).getAttribute("act_key"));

  • The storage name for the MIDlet suite was not given

    I am trying to RUN my application (MIDP 2.0 CLDC1.0) using OTA option in net beans IDE.
    But it gives this message
    **The storage name for the MIDlet suite was not given**
    and abort the execution
    I am using Push registry.
    Also I am sending and receiving sms through mobile.
    Please help me in this topic?

    midlet1, I asked you less than 12 hours ago not to post to old threads that are long dead.
    [http://forums.sun.com/thread.jspa?threadID=5353188]
    If you continue to ignore the request, your user account is liable to be blocked.
    I'm locking this thread now.
    db

  • My ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

    my ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

    You're gonna have to restore the iPhone from your last backup with iTunes. You did do a backup before you attempted to update the software didn't you?

  • Is marvel the code name for the next Portal version?

    I played around a bit in Marvel and I notice similar functionality in Portal.
    Is marvel the code name for the next Portal version?

    actually, joep, project marvel differs from portal in several respects. primarily, though, oracle portal is geared more towards content management whereas project marvel focuses more on application development.

  • How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

    I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

    Does this happen with each bookmark?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • How to get fully qualified name for a class with just the class name

    I want to get the fully qualified name of the class at runtime. The only piece of information which I have is the class name.
    I want to create a runtime instance of a class with the class name [Just the class name].
    Is there is any way to achieve this using ClassLoader?
    Could anyone suggest me an idea?
    Cheers,
    Vinn.

    Nope. If you are given "List", will you decide that means "java.util.List" or "java.awt.List"? Of course you could prompt the user to make the decision for you, I suppose. But using a class loader isn't going to make the task any easier.

  • How to change the machine name for the admin server?

    Hi, I've incorrectly set the machine name for my admin server. I now need to change this, but it's not editable (WLS 10.3.3).
    Is there a way to edit configuration files to get it changed?
    Thanks
    Jason

    Seems all I needed to do was edit config/config.xml (under my domain's path) and change the machine name manually (before shutting the admin server down).
    Regards
    Jason

  • How to hide the owner name on the client

    Hello,
    I would like to ask is there any possibility to hide the owner and description details while selecting the report on the client end i.e. Discoverer viewer.
    My client has issues in the owner name being displayed over there...
    Thanks!

    Hi,
    take a look at MOS DOC ID 306832.1
    You may have a problem doing that since a report can be saved with the same name by different users so you will get duplicated names without the
    ability to identify the report you need (most common are users that saves as workbook1).
    Tamir

  • How to get ther servlet name from the Httprequest / servletContext

    Hi,
    How can I get the servlet name from the Http Request / Servlet conext?
    Arthik

    I have a requirement to call the business logic either in local server / external server.
    Local / External server
    The original / main request is made to the server from the client and from the server if the main request requires some resource (second request from server side) available in the external server then I need to make a URL connection. If the requested resource is the local resource then I need to by-pass the HTTP call. So I need to verify the server name , port with the originally requested server.Then I need to check if the request servelt is available in local or not.
    Can you please help me.

Maybe you are looking for

  • NoScript won't uninstall / isn't listed as an Extension and getting angry about it, try this, it worked for me

    Your reviews of the standard articles by forum junkies that just shoot out links of more engineering pages like this one are resulting in slamming the mouse, pounding the keyboard and cussing aloud that even your cat probably won't be emerging for a

  • Releasing of many activities at once from NWDS failed

    Hi I have created several actvities in my NWDS and checked in and actvated them. I have created a track connection from this track to the other in CMS. Now i tried to release all my actvities and my colleagues activities too at once. It give a big na

  • HELP!! Half of my files from my media folder won't open!!

    I've been using iMovie for years and have never seen this before. I created a large project some time ago, and only about 50% of the files from the projects media folder will open. They show up in he media folder as the little black Unix executable f

  • Export MXF with 5.1 Audio

    Hi, i want to export a MXF-File with 5.1 Audio out of Premiere CC 2014.0.1, but the only options that i get in the audio export-menu are 2-channels, 4-channels, 6-channels, ..., 32-channels. Is it possible to export with 6-channels arranging the mono

  • PO release

    HI, In PO release strategy, Net order Value throws the error - "The output field is too small to display the value" when it's length exceeds 30. Need help .... Regards, Rahul