How to get the recipient and Note for recipient in Medium 7 Simple Mail?

Dear friends,
I'm trying to send the shipment in the form of PDF attachment to the assigned user. I'm wondering how can I get the receiver and the note(which should be the content of the email) which can be configured in the "Communication Method"?
Thanks,
YiNing

Well, the maintained text doens't  show up as the text of the mail content. So I'm actually asking how can I (from which variant in program) I can get this text. Or is there any standard program shows me how to do this?
Thanks!

Similar Messages

  • How to get the salesprice and condition for a customer / material / date

    Hi all,
    how can I get the correct price and condition for a customer / material / date ?
    I know this is possible using the BAPI_SALESORDER_SIMULATE, but this bapi is using to much ressources on the system.
    I'm trying to get the correct price and condition WITHOUT using that BAPI.
    Does anyone know how it is possible ? As said before : I have the customer, material and a date.
    thanks in advance for your help

    Hi
    You need it because it's possible to have a complex pricing procedure, and you can't do it with a simple select on a table. Think that you can have pricing requirements, formulas (ie: VOFM) and so on in your pricing procedure (tcode V/08).
    I hope this helps you
    Regards
    Eduardo

  • How to get the present And Absent for Empoyee for any date..

    Hi Experts,
    I have a requirement to find the present and absecnt of  any PERNR  value from Infotype 2002 in the  Program For a particular Date..

    hai lakhan,
      By Using rp_read_all_time_ity pn-begda pn-enda macro you eill get all the absence details.
    Reward Points if usefull.
    Thanks & Regards.
    Shiva

  • How to configure the runtime and consolidation for a track in CMS.

    How to configure the runtime and consolidation for a track in CMS.
    I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
    I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
    Please advise , what are these required for. And how can we configure the same.

    The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
    Hope it helps..
    Regards,
    Shikhil

  • How to get the "last changed by" for a set of function modules?

    How to get the "last changed by" for a set of function modules?
    is there any table to get it??

    See [this|Re: Date of creation of function module] I posted earlier.
    >TFDIR will give you the name of the function group program and the include number.
    >E.g. SAPLZFUNCGROUP Include 01.
    >From this you can construct the include name: LZFUNCGROUPU01.
    >You can look this up in TRDIR to find the creation date (CDAT) of the function module.
    In your case, you need unam and udat.
    matt

  • How to get the current month value for a customer exit variable?

    How to get the current month value for a customer exit variable? 
    And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
    Thanks!

    Hi Kevin,
    Check here........
    Re: Customer Exist for "From Current Date To Month End"
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
    Cal month
    Regards,
    Vijay.

  • How to get the Windows Vista Driver for ATI Radeon 7500 card?

    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Thank you.
    regards,
    W. Thong

    wthong wrote:
    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    The Radeon 9000 driver works for the Radeon 7500 card.  I have successfully used it on a T43 with Vista Ultimate x86
    wthong wrote:
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Unfortunately no.  The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
    Cheers,
    Bill
    I don't work for Lenovo

  • How to hide the Columns and Views for Login user in SharePoint 2013

    Hi Friends,
    How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
    Could you please help on this.
    Thanks,
    Tiru
    Tiru

    Hello Tirupal,
    There is no OOB way to do this.
    Please check this codeplex solution to achieve the same.
    https://sp2013columnpermission.codeplex.com/
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • How to get the restriction pass code for iPhone ?

    How to get the restriction pass code for iPhone ?

    if you forgot it you have to restore your phone to get past that code

  • I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy to a DVD.

    I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy photos and videos to a DVD.

    Connect your iPhone to your computer. Tp your pc should recognize your iPhone as a camera. Use what ever application you have on the pc to transfer files from a camera to your computer.

  • HT1725 I purchased a album of various artist, however some of the songs did not download, an error message saying something about not having proper information to download??? any thoughts on how I get the songs I paid for but did not download?

    After purchasing a album of TV Theme songs, during the download some of the themes would not load, an error message came up saying to the effect I did not have the correct info to download.  Does anyone know about this issue & any thoughts on how I aquire the themes I paid for?  The themes that did not load still show up in the music list but are greyed out & have an "!" exclamation mark beside the number of the item in the list.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • How to get the lock and block occured for the full day

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
    Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
    Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
    There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
    mins and insert its record in table which you can refer at end of the day.
    This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
    If you are looking for doc for troubleshooting blocking  below is one you can refer
    http://support.microsoft.com/kb/224453
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • How to get the list of values for a dynamic parameter using Web Services SDK?

    <p>I am struggling to get the list of values for a dynamic parameter of a report.</p><p>I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.</p><p>First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?</p><p>Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.</p><p>Thx </p>

    <p>Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.</p><p>We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.</p><p>We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.</p><p>Please let me know if you can think of an alternative to look at.</p><p>Thanks a lot,</p><p>Catalin </p>

  • How to get the values and attributes of Longlived processes by using ProcessID.

    Hi Experts,
    For  every process we creates, LC ES2 creates processID.
    we know that if you creates  a long lived process, all  the  values which are in proces will be stored some where  in DB.
    Here my requirement is by using  processID I need to get all/some values/variables stored in database.
    I am not able to get values using processID. Here I don't have clue on  how to get the values.
    Please tell me  how to get the same by using  Process Management. Link/guide would be helpful
    Thanks
    Praveen.

    Searchable means you can put a filter criteria on it (e.g. where amount > 50000)
    Visible means you can add have this column returned as an output (and therefore you can add it as column in listview and see it in Task Details).
    These two attributes were provided so that queries could be done against the process variables, but the exact contents of the variables are not allowed to be seen.

  • How to get the first and second quarter from CRT

    Dear Freinds,
                    I have one scenario , the Functional SPEC says Read the payroll results and from the CRT  get all the 4 quaters
    for the wage type /5UH  and sum them and then pass on the to field in the main strucutre.
    Iam using the FM HR_GET_PAYROLL_RESULTS
      CALL FUNCTION 'HR_GET_PAYROLL_RESULTS'
        EXPORTING
          pernr                         = fp_v_pernr
          permo                         = fp_v_permo
          pabrj                         = fp_v_pabrj
          pabrp                         = fp_v_pabrp
          actual                        = 'A'
        TABLES
          result_tab                    = i_payresult
        EXCEPTIONS
          no_results                    = 1
          error_in_currency_conversion  = 2
          t500l_entry_not_found         = 3
          period_mismatch_error         = 4
          t549q_entry_not_found         = 5
          internal_error                = 6
          wrong_structure_of_result_tab = 7
          OTHERS                        = 8.
    Iam collecting all the Actual Result (current result) values
    on the selection screen iam passing for month april (04 2008)
    so this falls in the second quater .
    the internal table   i_payresult is picking up only the second quater (01-04-2008 to 30/04/2008 )  ,but since on the selection screen iam pasing as other period (04 2008) the internal table  i_payresult  returing from the FM  (HR_GET_PAYROLL_RESULTS) only   picks the second quater,
    could any one let meknow how i can pick up the first quarter as well and add the first and second quater to mee the requirement .
    Please help me in this regard
    Thanks & regards
    maduri

    Hi Manoj,
                 Thank you for giving me idea for going further  regarding this problem , so my final question for this is
    as per FS they said they are going to enter the payroll
    area and the other selection as 04 2008 
    In order to achieve the first quarter , because 04 2008 means they are going to enter for the second quarter , the payroll results will come only for second quarter and not for the first quater , if they want to sum all the two quarters then they shouldnt pass on the selection screen   the dates as 04 2008, instead they has to pas
    01 01 2008 to 30 06 2008 , as there is no point in they passing as 04 2008 as we are going to consider from 01 2008 to 062008 .   Please correst me if am correct regarding the dates passing on teh selection screen
    or if the user enters on theslection screen still enter 04 2008 and will be  able to acheive the first quarter ??
    Please answer me this point before i can change the logic of the code and tell to my FO regarding this point.
    thanks & regards
    Madhuri

Maybe you are looking for