How to get the sql query result?

Hi,
Currently I am using LV2012 to connect a Oracle database server. After the installations/settings for Oracle Express and Oracle ODBC driver done.
I am sucessfully to use the SQL command to query the data through my window command prompt.
Now the problem is, how I do the same task in Labview by using the database connectivity toolkits?
I have build a VI for query as attached, but i have no idea what pallete to use to get the query result.
Please help me ~~
Solved!
Go to Solution.
Attachments:
Query.vi ‏9 KB

Here is a piece of code I use to test SQL commands, you can use the part that retrieves sql results.
It is also possible to get the column headers back, but that is for next lesson!
Attachments:
RunSQLCommand.vi ‏30 KB

Similar Messages

How to get the SQL Query statement of a Search Form ?

Hi all,
We have a requirement to send the query result of an ADF Search Form into report application (Crystal rpt).
Crystal can accept data source as query statement. SO I think of getting the exact query statement "generated" by the ADF Search form and send it to crystal.
Is this possible ?
Thank you very much,
xtanto

Try the various get methods of the viewObject such as getQuery:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtAnchor.getQuery%28%29/vtTopicFile.bc4jjavadoc%7Crt%7Coracle%7Cjbo%7CViewObject%7Ehtml/

How to get the dynamic query result

If in one query, there is the amount range dimension, based on different dimension value combination, the customer revenue should be refreshed into different range, how to make it by cube?
eg.
Customer Store    Material Month    Amount
C001     M & S    Tennis    2005/01   "10"
C001     Douglas Tennis    2005/02   "60"
C002     M & S    Soccer    2005/01    "1"
C002     M & S    Soccer    2005/02    "50"
C002     M & S    Tennis    2005/02    "50"
C003     Douglas Tennis    2005/01    20
Query condition:
Time Customer Amount Range     Amount
2005 C001     0~50_____________0
2005 C001     51~100___________70
2005 C001     100 +____________0
2005 C002     0~50_____________0
2005 C002     51~100___________0
2005 C002     100+_____________101
2005 C003     0~50_____________20
2005 C003     51~100___________0
2005 C003     100+_____________0
However, if I drill down Time into month, the result is total different, I only list the result related to customer C001
Time     Customer Amount Range    Amount
2005/01 C001      0~50____________10
2005/01 C001      51~100__________0
2005/01 C001      100 +___________0
2005/02 C001      0~50____________0
2005/02 C001      51~100__________60
2005/02 C001      100 +___________0
Any good solution on that? Thanks for any input.
Message was edited by: Lei Shao

Hi, Sen,
I used your solution in my infocube and query, where I created a structure with 'between'. However, it is still the simple summation in different amount range.
Just like the following:
Sales ORG / Sales Office / Sales Rep / Amount
East      / Atlanta      / 1001      / 3
East      / Atlanta      / 1002      / 4
So the query result is the same:
S-ORG / S-Office / S-Rep / Amount Range / Amount
East / Atlanta / 1001 / 0~5          / 3
East / Atlanta / 1001 / 5+           / 0
East / Atlanta / 1002 / 0~5          / 4
East / Atlanta / 1002 / 5+           / 0
When I remove 'drill down' for Sales Rep, the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 7
East / Atlanta / 5+           / 0
However our expection for the result is different, because in business traction, if we remove sales rep, the sales org and sales office will get the sub-total like this: (we can image it with ABAP program sub-total)
Sales ORG / Sales Office / Amount
East      / Atlanta      / 7
So our expection for the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 0
East / Atlanta / 5+           / 7
Therefore, any good suggestion for this?
Thanks a lot
Regards,
LS

How to get an sql query result to a textbox?

i am working with jdk1.4 and office 2003.
i need to run the following SQL Query: "SELECT max(BookId) as BookId FROM Books" where BookId is an autonumeric generated number obtained from the field autonumber in access 2003 database.
now, the result of this must be placed in a textbox.
does anyone knows how to do this?
I ve tried this but nothing happens and niether any error comes
st = con.createStatement ();     //Creating Statement Object.
long bookNo;          //Use for Comparing the Book's Id.
try {     //SELECT Query to Retrieved the Record.
String q = "SELECT max(BookId) as BookId FROM Books";
ResultSet rs = st.executeQuery (q);     //Executing the Query.
bookNo = rs.getLong ("BookId");          //Storing the Record.
bookNo =(bookNo+1);
txtBookId.setText (""+bookNo);
catch (SQLException sqlex) { }
does anyone knows how to do this?????plz help me out.
Thanks
Aanchal

Hi Aanchal,
If an SQL error occurs now, you cannot see it in your code. You should do something with the exception you catch, e.g. printing it: sqlex.printStackTrace(), so that you can see if something goes wrong.
For your number, you should move the cursor in the resultset to the first row - either by: calling first( ) or next ( ), then you can retrieve your booknumber.
Best Regards,
Martijn

How to convert the sql query result into xml ? PLease..Please..

I have a table Submission Record which contain a field with mix with text string and xml data type.
Table name: Submission Record
Field name: RCA
Jason
Tomato
<Record>AA</Record>
Fish
Brother
<Record>BB</Record>
<Record>CC</Record>
Tom is a girl
Its mixing with text and xml data.
I wish to convert all into xml data as per request from management.
my select statement is like below...but i think it may contain syntax error. Wish to get help from here.
sqltestagain = "select '<DATA>' || RCA || '</DATA>' from Submission Record".
Expect below will display
<DATA>Jason</DATA>
<DATA>Tomato</DATA>
<DATA><Record>AA</Record></DATA>
or any other solution for it ??
I've tried FOR XML....DBMS_XML......but none of it worked.....

also look at xmlelement
SQL> select xmlelement("DATA", rca).getstringval() from
2 (
3 select 'Jason' RCA from dual union all
4 select 'Tomato' from dual union all
5 select '<Record>AA</Record>' from dual
6 )
7 /
XMLELEMENT("DATA",RCA).GETSTRI
<DATA>Jason</DATA>
<DATA>Tomato</DATA>
<DATA><Record>AA</Record></DATA>
SQL>

How to get physical SQL query

Hi All,
How to get the physical SQL query for the OBIEE reports.
Thanks in advance,
Haree.

Hi Anitha,
Thanks for your reply,
I am getting XML script in log file. (Settings > Administration > Manage Sessions > View Log).
How to get physical SQL query ?
Thanks,
Haree

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"?
I have an install SQL scripts that creates a Linked Server. I want to put some security on the Linked Server and only grant the Agent Job Signon (the "Run As" or "Executed as User") access to the linked server. I need to retrieve the
Agent Job Signon (something like "NT SERVICE\SQLAgent$FIDEV360BI02").
I could query certain jobs and SUBSTRING the Message column - using some form of the query below, which would return "Executed as user: NT SERVICE\SQLAgent$SSDEVBI02. The step succeeded." But that is pretty imprecise.
use msdb
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration,
[Retries] = HIST.retries_attempted
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
-- CHANGE THIS
-- WHERE JOB.name like '%GroupMaster%' or Job.name like '%etlv%'
ORDER BY HIST.run_date, HIST.run_time

by default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!!

How to insert the select query result into table?

How to insert the select query result into table?
SELECT top 20 creation_time
,last_execution_time
,total_physical_reads
,total_logical_reads
,total_logical_writes
, execution_count
, total_worker_time
, total_elapsed_time
, total_elapsed_time / execution_count avg_elapsed_time
,SUBSTRING(st.text, (qs.statement_start_offset/2) + 1,
((CASE statement_end_offset
WHEN -1 THEN DATALENGTH(st.text)
ELSE qs.statement_end_offset END
- qs.statement_start_offset)/2) + 1) AS statement_text
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
ORDER BY total_elapsed_time / execution_count DESC;
Thanks,
Tirumala

1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Storing the SQL Query results as XML

Hi All,
I have a proc to select all the data from emp table and insert into another table. For some reason it inserts only one column and one record.
I don't have any row limit or skip ...
CREATE OR REPLACE procedure Convert_Data_Into_XML1
as
-- Var Declartion
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := dbms_xmlgen.newContext('SELECT * from emp');
-- set the row header to be EMPLOYEE
DBMS_XMLGEN.setRowTag(qryCtx, 'Employee-ROW');
DBMS_XMLGEN.setRowsetTag(qryCtx, 'Employee-rowset');
LOOP
-- now get the result
result := DBMS_XMLGEN.getXML(qryCtx);
DBMS_OUTPUT.PUT_LINE ('In the Loop');
EXIT WHEN DBMS_XMLGEN.getNumRowsProcessed(qryCtx) = 0;
INSERT INTO temp_clob_tab VALUES (result);
END LOOP;
COMMIT;
--close context
DBMS_XMLGEN.closeContext(qryCtx);
exception
when others then
dbms_output.put_line(TO_CHAR(sqlerrm));
END;
Basically I got this sample proc from Oracle website. As per the website I should be able to store all the records from emp table.
How can I debug this.
Here is the output from SQLPLUS>
SQL> select result from temp_clob_tab;
RESULT
<?xml version="1.0"?>
<Employee-rowset>
<Employee-ROW>
<EMPNO>7369</EMPNO>
>>>>>>>>>>
Thanks in advance
Siva

I am able to convert the SQL query output and I am able to store it in a XMLTYPE column.
But the code doesn't work when I took the same code and try to Implement inside a Trigger. The reason I am doing this is, when there is an update or delete, I want to store the whole record as a XMLTYPE doc (before and After). But the code compiles fine, but when I tried to update a record it gives error.
CREATE OR REPLACE TRIGGER INS_UPDDEV_EMP3_F
BEFORE UPDATE OR DELETE ON EMP
FOR EACH ROW
DECLARE
V_DBUSER VARCHAR2(50);
V_CHANGETYPE VARCHAR2(20) := 'INSERT' ;
QRYCTX DBMS_XMLGEN.CTXHANDLE ;
OLDVALUE XMLTYPE;
NEWVALUE XMLTYPE;
BEGIN
IF :OLD.EMPNO <> :NEW.EMPNO or DELETING then
---------- old Value
QRYCTX := DBMS_XMLGEN.NEWCONTEXT ('SELECT :OLD.EMPNO, :OLD.ENAME, :OLD.JOB, :OLD.MGR, :OLD.HIREDATE, :OLD.SAL, :OLD.COMM, :OLD.DEPTNO FROM EMP WHERE EMPNO=:OLD.EMPNO ');
DBMS_XMLGEN.SETROWTAG (QRYCTX, 'DEPTROW');
DBMS_XMLGEN.SETROWSETTAG(QRYCTX, 'DEPTSET');
OLDVALUE := XMLTYPE(DBMS_XMLGEN.GETXML(QRYCTX));
------------------------- new Value
QRYCTX := DBMS_XMLGEN.NEWCONTEXT ('Select * WHERE EMPNO=:NEW.EMPNO '); -- WHERE :OLD.EMPNO
DBMS_XMLGEN.SETROWTAG (QRYCTX, 'DEPTROW');
DBMS_XMLGEN.SETROWSETTAG(QRYCTX, 'DEPTSET');
NEWVALUE := XMLTYPE(DBMS_XMLGEN.GETXML(QRYCTX));
V_CHANGETYPE := 'UPDATE' ;
INSERT INTO ADM_RECAUDITHISTORY VALUES ('table emp', 'fIELD all', OLDVALUE, OLDVALUE,
V_CHANGETYPE , SYSDATE, 'TIGER TRIG');
commit;
END IF;
END;
I am getting the following error while updating the record.
>>>>
ERROR at line 1:
ORA-19206: Invalid value for query or REF CURSOR parameter
ORA-06512: at "SYS.DBMS_XMLGEN", line 83
ORA-06512: at "SCOTT.INS_UPDDEV_EMP3_F", line 13
ORA-04088: error during execution of trigger 'SCOTT.INS_UPDDEV_EMP3_F'
>>>>>
Is anyone knows why I am getting this error.
Thanks
Siva

How to get the SQL queries based on SQL_ID.

Hi Experts,
I want to get the SQL queries based on SQL_ID.
I have tried the following query,but I am not getting full query.
[code]SET linesize 132 pagesize 999
column sql_fulltext format a60 word_wrap
break on sql_text skip 1
SELECT   REPLACE (TRANSLATE (sql_text, '0123456789', '999999999'), '9', ''),sql_id
FROM   dba_hist_sqltext s
WHERE   s.sql_id = '7tvurftg8zryb';[/code]
One of my friend said use grid to get full query text.
Can you please help me how to use grid ,else any other method to get the full query based on SQL_ID.
Please help me.
Thanks in advance.

You have these many options to set, if sql_text is really huge. But better use a tool(TOAD) as it's really helpful and easy to use instead! (See my previous comment).
column sql_text format A10000
set echo off
set head off
set feed off
set verify off
set termout off
set lines 10000
set long 1000000
set trimspool on
set pages 0
Thanks!

How to get the SQL Execution Plan from complex Extractors ?

Hi
I am looking for a way to get the
SQL Execution Plan(s!)
from
Complex Extractors like 0CO_OM_CCA_9 ?
Anybody has got a suggestion ?
How to get this in SM50 ?
ThanXs
Martin

Identifying the query is the hard part. If you can identify it(based on table access or some such parameter, getting the execution plan is easy in ST04 .

How to get the SQL file name in SQL*plus

hi all,
     I have created two sql file at C drive as "c:\Createtable.sql" and "c:\Deletetable.sql"
afterwards i open
C:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jan 30 11:37:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: scott/tiger
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @C:\Createtable.sql'
Table created.
SQL> @'C:\Deletetable.sql'
Table dropped.
SQL>My problem is to get the name of the file as "c:\createtable.sql" and "C:\Deletetable.sql" in sql*plus enviornment.
Thanks & Regards
Singh

Dear Damorgan,
     >>your version number to three decimal places
     My Oracle DB Version i have already stated in my previous post is 10.2.0.1.0
Actually my problem is to get the sql files name we run in sqlplus enviornment with @ symbol. like
i have created one sql file in c drive as
"C:\Createtable.sql"
afterwords i have connected to sqlplus as
sql> conn scott/tiger
sql>@c:\createtable.sql
Now i want some query to get the name of the file which is run.
In actual my problem is as
i have suppose 10 or more SQL files in some folder ( sql1.sql, sql2.sql, sql3.sql ....).
i created one file to call all the 10 sql files (main.sql)
i have also one track_table which will keep track that which sql file is runned.
I want some automated script which will insert the record in that track_table....... for that i need the name of sql file which is runned.
Hope this will help you.
Thanks & Regards
Singh

How to get the SQL statement

I cannot figure how to get the text(SQL statement) from a system view(i guess it is in a system view... but witch??). 'Till now i have the sql_address and the sql_hash_value..
I know it is possible.. EM does it ... so i should be able to do the same..
ps:I use 9.2

v$sql ?

How to get the Sql inside Omni SQL portlet.

Hi,
We are trying to find a table/view which stores/holds the Sql and Pl/Sql code of Omni Pl/sql portlets.
Thanks,
Ram.

by default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!!

How to get the sql query result?

Similar Messages

Maybe you are looking for