How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

Similar Messages

Trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]]

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

Welcome to Apple Support Communities
Press Alt, Command and Esc keys, select the crashed app and force quit it. Then, open this app again.
If you didn't save this document, it's possible that you lost the changes you made unless you have OS X Lion or Mountain Lion and they saved your document automatically

How to get a Tree Node Value when a Tree is Expanded

My reqiurement is when i Expand a Tree i need the Expanded tree Node Value. For Example Consider Parent as a Root Node of a Tree, and Consider its two Children Child1 and Child2.
When + Parent Expanded
I will Get the Output as --Parent
- Child1
- Child2
so As when i expand the Tree i must Get the String Value Parent.

duplicate
How to get a Tree Node Value when a Tree is Expanded

I recently upgraded to the newest version of Firefox, and can't find the "Restore Last Session" command. Anyone know where it is? Thanks

The upgrade was in the last few weeks.
I've checked the "history" section, and don't see the link.

see :[https://support.mozilla.org/en-US/kb/Session-Restore Session Restore]
see also : [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page Restore the default home page]
(if you've set your home page to something other than the default Firefox home page)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How to keep the tables headers on top and never scroll with the table?

does anyone knows the code to do so?
urgent needed.
thx.

Hi
Do you need a window shows in the below website???
http://www.milonic.com/mfa/2004-August/004742.html
If so, view source the page.
Newt.

Can't remove the screen lock by PIN and can't use the screen to receive calls

Hello, I have a brand new SONY Xperia , Model Number D5803, Android version 5.0.2. , Baseband version 8974-AAAAANAZQ-00063-42, Kernel version 8974-perf-g3f600d1. , Build number 23.2.A.1.62.
I set a screen lock by PIN. However when I receive calls I can’t take them, because the screen in locked.
I tried to turn off the screen lock, but when I select the “ Screen lock” menu and after entering the correct PIN, the following items are not active “None”, “Slide” and “Pattern” . So I can't select “None”
The only active items are “PIN” and “Password” .
Please advice how to remove the screen lock by PIN. I hope this will help to be able to receive calls.
Thank you

To enable None and Swipe options, you need to go to Settings -> Security -> Clear credentials. Then those options will become active again.
However, you should be able to take calls even when you have PIN security, can you describe what shows on the screen when you have an incoming call while screen is locked?
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

HT4623 My iPhone will no longer connect to the internet or download my mail from iCloud. The software is OS6 and I have plenty of storage space on the phone and iCloud. I have checked all the obvious stuff in settings and can't resolve the issue.

Since late September my emails stopped arriving on my iPhone. Access to the internet via Safari now only ends in a message "Safari could not open the page because the server stopped responding" I don't recall changing any settings and have checked the settings many times to try to figure out whats happening but without success. Ideas anyone?
Thanks

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is preventing the backup from succeeding. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

Updated a page and now the "Publish Site" stays gray and can't update the site. What's up?

Updated my iWeb page and now it won't publish. "Publish Site" stays gray. What to do now? I'm not using Mobil Me. FTP published. Workd before. Haven't a clue now.

Try making a minor change to that same page, like moving an object a couple of pixels one way or the other, and see if the File ➙ Publish Site Changes menu option will work for you.
OT

How to get automatically sysdate in a field

How to get sysdate automatically in a field in ADF

As provided in the above blog post provided by Branislav,
use the groovy expressions for defaulting the date using the following expressions is the right & recommended approach:
Only date: adf.currentDate
Date with Time: adf.currentDateTime
see section 3.6.1 in ADF Developer's guide:
http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcintro.htm#CEGJJJBA
Thanks,
Navaneeth

I entered the redemption code awhile ago but can't find the serial number. how do I get it now?

I entered the redemption code awhile ago and can not find the serial number. I need to reload the bought program but need the serial number. Any ideas?@

Direct Updates
https://www.adobe.com/downloads/updates/
If you happen to own a Windows machine you might be able to get the serial number by running Belarc Advisor
http://www.belarc.com/free_download.html

How to get updated table values from objectlistdataproviders

how to get updated table values from objectlistdataproviders

Hi,
Here is a sample code
start-of-selection.
*Select the data you need into an internal table
loop at it_mara into wa_mara.
data that needs to be displayed in the output list
    write:/ box as checkbox,
            wa_mara-matnr under text-001,
            wa_mara-maktx under text-002,
            wa_mara-lgort under text-003.
Hide the data that needs to moved to internal table
    hide:wa_mara-matnr, wa_mara-maktx, wa_mara-lgort.
endloop.
clear wa_mara.
end-of-selection.
lines = sy-linno.
at line-selection.
clear:it_matnr.
do lines times.
    check sy-index > 1.
    box = space.
    read line sy-index field value box.
    if box = 'X'.
*data selected using check box is moved to internal table
      append wa_mara to it_matnr.
    endif.
enddo.
Regards,
Jisha.

How to get metadata option list values derived from a table/view using SOAP

I am writing an ASP.NET application that replicates some of the features of the SCS search interface. I have looked at the GET_DOC_METADATA_INFO service and its SOAP output. It has a few missing pieces of information, like the option list values for a field if that fields values are derived from a separate table/view. Some of the fields I am dealing with also make use of Dynamic Control Lists (DCL). Is there a way to get the DCL info using SOAP? I did notice that the dOptionListKey element contains the name of the view from which the option list values will be derived. However, I cannot find a service that takes the view name as a parameter to return the option list values. I have looked in the services reference manual, but I have not had any luck finding what I am looking for.
TIA
- Tyson
Message was edited by: Add the word 'get' to the subject.
Tyson

Hello,
What error you are getting? You code seems to be ok. I have tested below code and working fine
XPathNavigator rTable = MainDataSource.CreateNavigator();
String ddlSectionSelectedValue = Convert.ToString(rTable.SelectSingleNode("/my:myFields/my:ddlSection", NamespaceManager).Value);
One think you can check that keep dropdown value display name and id same.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

How to get the table of value field? and can we expand the technical limits

Similar Messages

Maybe you are looking for