How to get the Text name to pass in the parameter header in save_text

Hi,
I am trying to change the long text of operation for historical order by using the flat file.I am using the save_text to do this.I would like to know how to get the text name in order to pass the parameter header in save_text.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates and where is this value updated in the table so that i can link it thru the order no to get the link and pass it in the text_name.
can anyone help me out?
krishnan

Hi,
Your query is.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates
In above number
300 - Client
1000000092 - AUFPL - Routing number of operations in the order (You can fetch this from table HIVG)
00000001 - APLZL - General counter for order ( You can fetch this from table HIVG).
BR,
Vijay

Similar Messages

How to get the view name by passing the window name from table

Hi All,
would like to knew about the standard table from which we want to "retrieve the VIEW name by passing WINDOW name"
as we have standard tables like WDY_WINDOW, WDY_VIEW,WDY_APPLICATION but our ZComponent details
are not updated in this WDY_WINDOW table.
Is there any other table exists on the above condition
Regards
Jaipal.E

Hello friend,
There are many structure names started with WDY_WB_VC*where the details of the windows and views are stored just search those structures and see where its getting the tables in run time so that you can get the source tables.
I think this will be useful for you.
Thanks,
Sri Hari

A while ago i went to sync music onto my Ipod Touch. Not only did the computer erase my music i had no idea how to get it back :( I contacted Apple on the phone but the name was american and i found it really hard to understand him. How do i get it back!

A while ago i went to sync music onto my Ipod Touch. Not only did the computer erase my music i had no idea how to get it back I contacted Apple on the phone but the name was american and i found it really hard to understand him. How do i get it back! i bought most of my music on itunes but i just dont have any idea where to go and whjat to do can any help me??
Respond please!

Depending upon what country that you are in (music can't be re-downloaded in all countries) then see if you can redownload your past music purchases (those that are still in the store) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you are not in a country where music can currently be re-downloaded, then have you not got it on your computer and/or on a backup ? If not then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.

The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

How to get Long text in CJ20n

Hi,
I need to get the long text that we maintained in CJ20n tcode under long text at project level. I need to display the same in Script layout or report. I didnot find any table or functional module to get it. please help me out.
regards,
Chandra

Hi
Double click on the Long text, it will take you to Text editor
from the Menu GOTO-> HEADER
you will find the OBJECT,ID,OBJECTNAME and LANGUAGE parameters for that lang text which are to be passed to the READ_TEXT fun module
for displaying it on report use the above fun module and fetch the text in IT_LINES internal table and write it on report output
You can also see the doc of the read_text
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
IN SCRIPTS you can use the INCLUDE statement to print the Long texts
/: INCLUDE TEXT<name> ID <id> Lang <en> paragraph <za>
Regards
Anji

How to get Long text in report from FBL3N

Hi,
I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?

Hi
These long texts are not stored completely in any tables
where as the parameters of these texts like OBJECT,OBJECTNAME and ID, LANGUAGE are stored in STXH table
You have to pass these 4 parameters to the fun module READ_TEXT and to fetch the text.
Double click on the long text will goes to text editor
from menu GOTO-> HEADER you will see the above 4 paramters
see the doc of READ_TEXT fun module
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji

How to get Sales Text & Purchase Order Text in MM based on (MSEG-MATNR)

Hi
Am working on a Report based on Purchase order & Sales, Could any body tell How to get Sales Text & Purchase Order Text in MM based on (MSEG-MATNR).
the Field i need to get are : SALES TEXT, PO TEXT.
Sunil.

Hi Sunil,
For getting Material PO text and sales text, you have to rely on Purchase Order and Sales Order. And use READ_TEXT function module to fetch the text.
Below are examples of PO text and Sales Text:
1. PO text:
    CALL FUNCTION 'READ_TEXT'
     EXPORT
       ID = 'F03'
       LANGUAGE = SY-LANGU
       NAME = '450000011200010' conacte PO number and line item number
       OBJECT = 'EKPO'
     TABLES
       LINES = INT_TLINES "you will get text in this table
2. Sales order text:
        CALL FUNCTION 'READ_TEXT'
     EXPORT
       ID = '0001'
       LANGUAGE = SY-LANGU
       NAME = '0000000036000010' conacte SO number and line item number
       OBJECT = 'VBBP'
     TABLES
       LINES = INT_TLINES "you will get text in this table
ref: STXH and STXL tables.
Hope it will solve the problem.
Regards
Krishnendu

How to store data file name in one of the columns of staging table

My requirement is to load data from .dat file to oracle staging table. I have done following steps:
1. Created control file and stored in bin directory.
2. Created data file and stored in bin directory.
3. Registered a concurrent program with execution method as SQL*Loader.
4. Added the concurrent program to request group.
I am passing the file name as a parameter to concurrent program. When I am running the program, the data is getting loaded to the staging table correctly.
Now I want to store the filename (which is passed as a parameter) in one of the columns of staging table. I tried different ways found through Google, but none of them worked. I am using the below control file:
OPTIONS (SKIP = 1)
LOAD DATA
INFILE '&1'
APPEND INTO TABLE XXCISCO_SO_INTF_STG_TB
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
COUNTRY_NAME
,COUNTRY_CODE
,ORDER_CATEGORY
,ORDER_NUMBER
,RECORD_ID "XXCISCO_SO_INTF_STG_TB_S.NEXTVAL"
,FILE_NAME CONSTANT "&1"
,REQUEST_ID "fnd_global.conc_request_id"
,LAST_UPDATED_BY "FND_GLOBAL.USER_ID"
,LAST_UPDATE_DATE SYSDATE
,CREATED_BY "FND_GLOBAL.USER_ID"
,CREATION_DATE SYSDATE
,INTERFACE_STATUS CONSTANT "N"
,RECORD_STATUS CONSTANT "N"
I want to store file name in the column FILE_NAME stated above. I tried with and without constant using "$1", "&1", ":$1", ":&1", &1, $1..... but none of them worked. Please suggest me the solution for this.
Thanks,
Abhay

Pl post details of OS, database and EBS versions. There is no easy way to achieve this.
Pl see previous threads on this topic
SQL*Loader to insert data file name during load
Sql Loader with new column
HTH
Srini

How do I write a vi that will save graph data and text data (related to the graph) so the next time I want to view the graph data the text data is included in the read vi?

I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
Attachments:
force.vi ‏500 KB

What you want is a DATALOG file:
When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
Write the same bundle output to the DATA input of a WRITE FILE function.
Use a CLOSE FILE function to (ahem) close the file.
When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
offer files of the correct type.
When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
Use a CLOSE FILE function to....
Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
Hope that helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

How to get a computer name in teststand step ?

how to get a computer name in teststand step ?

Hi,
Use an ActiveX Automation Adapter with the following settings,
ActiveX Reference : RunState.Engine
Automation Server: TestStand API (depends on your version)
Object Class: Engine (IEngine)
Action: Get Property
Property: ComputerName
Then set your Parameters: to pickup the String ComputerName.
Regards
Ray Farmer
Regards
Ray Farmer

How to get carrier company name on windows phone 8.1?

how to get carrier company name on windows phone 8.1?

excuse me, i referrer the link http://stackoverflow.com/questions/26973111/get-carrier-name-cellular-mobile-operator-name-using-windows-phone-8-1 to
modify my universal app.
but i always get 0 count from the GetNetworkNames() method.
if my sim card is for 3G, but i setting 4G in highest connection speed. i got the "the pipe is being closed".
how can i solve the problem? thank you.

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?
I use the Tools > Annotate > Add Text feature, and when I click away after adding text, it automatically changes the text box size such that the last letter -- or last word -- gets bumped off into an invisible line below it, forcing me to manually adjust every single text box. It is highly annoying when trying to complete PDF forms (e.g. job applications).
It appears to be a glitch, quite honestly, an error resulting from Apple's product design. Has it been fixed in the new operating system (for which they want $30)?
I would very much appreciate any help you can provide! Thank you for your time.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How to get Sequence File Name ?

Hello everybody !!
I'm using TestStand 3.1 and i would like to get sequence file name. I've tried to use NameOf() function, but without success.
Of course, I've searched previous posts about the same question, but nothing works.
Is there someone able to tell me how to get sequence file name ?
Thanks a lot.
MrOrange

MrOrange,
first of all, the solution i will present only works for saved sequence files.
you got all information you need within TestStand itself, just browse for RunState.SequenceFile.Path. here you can find the filename. but the path of the file is also included in the string, so this is a part you have to get rid off.
you can use statements to extract the filename from the path. just search the string for the last occurence of "\\" (searchinreverse!) and then you can retrieve the right() part of the path. beware that right() needs the number of characters you want to extract, not the startindex!!
hope this helps,
Norbert B.
NI Germany
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to get mobile model name for different types mobile devices

Hi,
I have checked few thread in this forum about getting mobile model name at server. So far, i noticed the mobile name is set manually in the midlet as user-agent .
HttpConnection connection = null; connection = (HttpConnection)Connector.open(url); connection.setRequestMethod(HttpConnection.POST); connection.setRequestProperty("User-Agent","Nokia7110 Profile/MIDP-1.0 Configuration/CLDC-1.0");
i retrieve the header information from servlet like below :-
String userAgent = request.getHeader("User-Agent");
How to get mobile model name for different model devices , not by manually adding the model name in midlet?
Thanks in advance :-)

Hi,
In J2ME there is no method to get the model number from the device. how ever you can use the APIs provided by the device manufacturer if available. But still the APIs will not work with devices from other manufacturer or sometimes it will not work with the devices of the same manufacturer if the API is not supported. so it is better to send the device model name through the header.

How to get XI host name & IP address in Message Mapping

Hi,
Does anyone have an idea how we can get XI host name & IP address dyanamically in our mapping.
Thanks in advance.
Regards,
Sarvesh

Hi,
Please find the code below for the UDF which serves the function: to check value for the PI system id (probably use System.getProperty("SAPSYSTEMNAME")) - if the system name is PIP then the function returns u201CPu201D; otherwise the function should return u201CTu201D
String SystemID = null;
SystemID = System.getProperty("SAPSYSTEMNAME");
if (SystemID.equals("PIP"))
result.addValue("P");
else result.addValue("T");
No input is required for the UDF and also no import packages required apart from the default ones in UDFs..
regards,
Kishore

How to get the Text name to pass in the parameter header in save_text

Similar Messages

Maybe you are looking for