How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

Similar Messages

How to get 4G to work (when I don't have WiFi access)?

OK, I just got my Droid Raxr Maxx yesterday, and so far, I love it. However, now that I'm out of my house and away from a WiFi connection, I am unable to use the browser, check Facebook, shop Google Play, etc. because it tells me I have no internet connection. Any suggestions? I assumed the 4G would take over whenever a WiFi connection wasn't available, but that doesn't seem to be happening. Any help would be much appreciated. Thanks in advance.

I know you haven't had your phone long but here's one feature that is neat to have an i got on my Maxx an it Deals with Wi-Fi an the NetWork i will Show how to set this Up: The Video below shows how to set up smart Action in General...
To start this go to the Smart Actions App in your app draw: tap to go in while there on the main page tap the Green + sign to start you will have 3 choices go with ( Start from Scratch )
You will then see Triggers an Actions Tap the + for the triggers Select Wi-Fi Connection then you will need to select your Wi-Fi say for example bigbluesky11 once selected you will need to tap it to Enable it. While still on this screen you will see a white box above triggers With New Rule an a bar flashing Tap the Box an put {Home} that's what i put for mine
Next you need to set up an Action to do that you tap the + for the Action Select Cellular Data once you select that It will pop up asking to Enable or to Disable Select Disable!
Once you are done with setting up these Settings down on the bottom of the phone are {Add Rule} or {Cancel} Choose Add Rule an your Set is complete.
What does this do you ask it shuts off the Cellular Radio automatically when your home an when leave home an your out of range of the Wi-Fi the Cellular radio kicks back on Automatically. You don't have to mess with turning it on an off all of the Time
Smart Actions work really well you just got figure How you want to set them Up an an what turns off what an When. Like when i want to Listen to my Ear Phones when i plug them in it automatically kicks on my selection witch is Winamp an all need to do is tap the station i have selected to play my Music. I hope this helps ya out an Question please ask at this Post. b33

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. MY question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this aren't working

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!

That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html

Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?

Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?
It starts up and asks for a language. After English, it goes to the OS X Utilities screen. I have gone to disk utility and verified the disks. They both say they are okay. If I click repair, it comes back with an error saying "Live file system repair is not supported." I just want my computer back to normal! Please help! I am still in Mavericks if it matters.

Do you have a backup? If so, in the Recovery Partition go to Disk Utility/Erase, select Mac OS Extended (Journaled), click Option GUID, and erase the disk. Then re-install the OS. Reboot and use Setup Assistant to recover your data.

How to get the cursor position in the text edit box?

Hi, all.
I want to get the cursor position in the text edit box
to insert some data.
But I don't know how to get.
Can someone give me some advice?
BestRegard.
Miya.

Hi Miya,
Write your own textSelectionSuite for this.
and use ITextTarget->GetRange() function.
Thanks and Regards,
Yopangjo.

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan

My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

http://discussions.info.apple.com/thread.jspa?messageID=12248238&#12248238
http://discussions.apple.com/thread.jspa?threadID=2649035&tstart=0

How do i get an externally loaded movie clip to inherit the playhead position of the main timeline?

Hi Flash experts, i'm hoping that someone can help me with this annoying problem.....
I have been approached to design a configurator for a new television product. The Application will let users specify the colours of certain parts of the product and also attach addons, which then updates a cost total.
In the main interface i have a looping animation of the product slowly rotating around 360 degrees that i rendered in 3ds max. When a user clicks a button on the interface i need to load an external movieclip on top of the main animation so it looks as though a certain part has changed colour, this i have acheived. The problem is that when i load the external clip over the original, the loaded clip starts playing from frame 1 and i need it to inherit the playhead position of the main animation so the two layered pieces look as though they are rotating as one. I'm sure this must be possible, unless i need to approach the problem in a different way?
I hope this makes sense,
Any help on this subject would be hugely appreciated.
Many Thanks
Matt

Hi again Ned,
I've almost got it i think, my code now looks like this....
on (release) {
         var loader:MovieClipLoader = new MovieClipLoader();
         loader.loadClip("Bezel/Bezel_Red/Bezel_Red.swf",Empty_MC);
         var loadListener:Object = new Object();
         loader.addListener(loadListener);
         loadListener.onLoadComplete = function() {
         Empty_MC.gotoAndPlay(_root._currentframe);
This code loads the external clip fine and i know the onLoadComplete listener is working because if i change the last line to: Empty_MC.gotoAndStop(1);
it works. I think its just that last line: Empty_MC.gotoAndPlay(_root._currentframe); that is causing the problem?
Many Thanks for all your help, it is greatly appreciated
Matt

How to make the new Array start at the same position as the previous and randomise only the newObjec

So i am currently trying to make 5 boxes/ships (3Blue and 2 Green)appear in a random position(1st-Gree,2nd- Blue,3rd-blue,4th-Green,5th-Green or in some other random way) i the upper corner of the stage.Make them move down.Then make a new 5 boxes and position them in the same starting position as the previous 5 and make only them get randomised (not with the previous 5,what it is doing at the moment).And do this while they are moving down. so the code so far i have is this :
import flash.events.Event;
var shipCount:Number;
var shipCount2:Number;
var shipArray:Array = new Array();
var shipArrayPosition:Array = new Array();
var counter:int = 0
var positionsX:Array = ["50","100","150","200","250",]
addEventListener(Event.ENTER_FRAME, everyFrame)
function everyFrame(ev:Event):void{
          counter++
          if(counter % 70 == 0){
                         doShips()
          positionShips()
          trace(shipArray.length )
function doShips() {
          shipCount = 3;
          shipCount2 = 2;
          var gap = 10;
          for (var i:int = 0; i < shipCount; i++) {
                    var s = new Ship;
                    shipArray.push(s);
                    //s.x = s.width/2 + (s.width* i) + gap*i
                    //addChild(s)
                    //shipArrayPosition.push(s);
          for (var j:int = 0; j < shipCount2; j++) {
                    s = new Ship2;
                    shipArray.push(s);
          var array:Array=new Array();
          while (shipArray.length>0) {
                    var index:uint = Math.floor(Math.random() * shipArray.length);
                    array.push(shipArray[index]);
                    shipArray.splice(index,1);
          shipArray = array;
          //shipsArray has been randomized
          for (var k:int = shipArray.length - 1; k >= 0; k--) {
                    shipArray[k].x = positionsX[k]
                    addChild(shipArray[k])
function positionShips() {
          for (var i:int = shipArray.length - 1; i >= 0; i--) {
                    shipArray[i].moveDown() //what the code in the Ship and Ship2 class does -> only: this.y += 3
and how to make them stay at one position.Not to move in any X position when the new 5 are added

This one is more efficient yet because it removes ships that moved out of view:
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.events.Event;
var numShips:int = 5;
var shipCount:int = 3;
var shipArray:Vector.<Sprite> = new Vector.<Sprite>();
var counter:int = 0
var positionsX:Array = [];
init();
function init():void
          // populate positions
          for (var i:int = numShips - 1; i >= 0; i--)
                    positionsX.push(50 * i);
          addEventListener(Event.ENTER_FRAME, everyFrame);
function everyFrame(e:Event):void
          counter++
          if (counter % 70 == 0)
                    doShips();
          positionShips();
          trace(shipArray.length);
function doShips():void
          var gap = 10;
          var s:MovieClip;
          var shipsLine:Sprite = new Sprite();
          shipsLine.cacheAsBitmap = true;
          addChild(shipsLine);
          shipArray.push(shipsLine);
          shuffle(positionsX);
          for (var i:int = numShips - 1; i >= 0; i--)
                    s = i < shipCount ? new Ship() : new Ship2();
                    s.x = positionsX[i] + gap;
                    shipsLine.addChild(s);
          shipsLine.y = -shipsLine.height;
function shuffle(a:Array):void
          for (var i:int = a.length - 1; i >= 0; i--)
                    var r:int = Math.floor(Math.random() * (i + 1));
                    var t:Object = a[r];
                    a[r] = a[i];
                    a[i] = t;
function positionShips():void
          for each (var shipLine:Sprite in shipArray)
                    shipLine.y += 3;
                    // remove line that moved out of stage
                    if (shipLine.y > stage.stageHeight + shipLine.height)
                              removeChild(shipLine);
                              shipArray.splice(shipArray.indexOf(shipLine), 1);

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

How can I retrieve my password when the retrials email was not recoverable? I also can't use or pass the othere menace of recovery? Not being able to pass or answer the security questions?

How can I retrieve my password when the retrials email was not recoverable either? I also can't use or pass the othere means of recovery? Not being able to pass or answer the security questions?
I created a new ID but never being able to update the iTunes that were purchased/saved using the old id?
I can't also delete.

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Hi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang

How can I return to the same position in the calling order details form

I am Calling a form for creating a new item from order details form, so after creating The new item I want to returned the item code to the calling form to same position in The order details form , how can I return to the same position in the order details form
Waiting for your valuable answer .
Best regards
Jamil Alshaibani

Dear Friends
My actual problem description as the following
I have a form for production order screen , and this form contain header and details blocks , so the user in the details will select Type Code , and he will go the next field that is Item Code Field search for specific Item Code if it is not exist he has to call the Item Definition Form by using this script
CALL_FORM(ITEM_DEFINITION);
Then when he finished defining the Item , and I assign the item code as the following in the :
WHEN-BUTTON-PRESSED TRIGGER
:GLOBAL.ITEM_CODE_VAR := :ITEM_CODE;
DO_KEY('exit_form');
But I don't know where to keep this assignment
:ITEM_CODE := :GLOBAL.ITEM_CODE_VAR;
inside the caller form in which trigger do I have to use when it return from the caller form it should assign the :GLOBAL.ITEM_CODE_VAR to the :ITEM_CODE and the cursor it should show inside the ITEM_CODE , and as I mention it does not return to the same location of The ITEM_CODE when it return from the calling form
Waiting for your valuable answer .
With example please .
Best Regards
Jamil Alshaibani

TS2755 How do I turn of imessage when i no longer have the iphone!?

How do I turn of imessage when i no longer have the iphone it was activated on? so frustrating dont get any messages from iphone friends also it seems like there is no solution to this problem and to make it worse apple cant help without a serial number!!

please
Allan Sampson
wjosten
can you do something about my message, to much personnal info. Possible to make it diseappear ?

How to get the Useru2019s position when the user doesnu2019t have CP relation

Similar Messages

Maybe you are looking for