How to get the vendor number that was created using xk01..?
Suppose i am creating a vendor with all the information by using a bdc program.
In the same program if i want to go to the XK02 of that particular vendor that was created recently....how it possible..?
Means how to get that particular vendor number that was created recently...?
Hi...
You Can Get the Vendor number after Calling the Transaction 'XK01' as below.
<b>Declare a table for Collecting messages :</b>
DATA: T_MSG TYPE TABLE OF BDCMSGCOLL,
WA_MSG TYPE BDCMSGCOLL.
<b>Then Call Transaction Statment:</b>
CALL TRANSACTION 'XK01'
USING T_BDCDATA
MODE 'N'
MESSAGES INTO t_msg.
if sy-subrc = 0.
READ TABLE T_MSG INTO WA_MSG WITH MSGTYP = 'S'.
MSGID = 'F2'
MSGNR = '175'.
<b>Note: Bcoz the XK01 will issue this message</b>
if sy-subrc = 0.
write: / WA_MSG-MSGV1. "This will contrain Vendor Number
endif.
endif.
And you can also Try the Other method i.e. after the Call transaction statement
<b> GET PARAMETER ID 'LIF' field V_LIFNR.
WRITE:/ V_LIFNR.</b>
Reward if Helpful.
Similar Messages
-
How to get the page number that which have page item?
i used Ilayouttarget .By using the selection target to get page number that which page have item to be.
i used Ilayouttarget .By using the selection target to get page number that which page have item to be.
-
Wanted to buy ipod nano, but got a problems with payment information. And now can't cancel an order.
Where did you try and order it? From Apple's website? Perhaps this page can help.
Viewing & Changing Orders
B-rock -
TS3988 How do I get the email account that was in icloud?
Hello, my manager handed me his phone off to resolve it and I restored and updated the iphone without knowing who was the account that was set up iCloud, and now I can not activate the phone. How do I get the email account that was in icloud that was configured on the phone? Starting email already know who is the account
No one can give you that. Ask your manager to contact the previous owner of the device. They are the only one who can help you with this, either by providing the correct ID and password, or erasing the phone and removing it from their account as explained here: http://support.apple.com/kb/TS4515.
-
Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts > Layer Comps to PDF"? And how do I get them to look the same?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How to get the users list that can Add/Remove or modify Vendors in Oracle?
How to get the users list that can Add/Remove or modify Vendors in Oracle?
I need to generate a report like name and responsibility. ThanksThat query gives the Supplier information.
But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
I assume it should be based on the Responsibility. -
last night I stole my ipad and not how to get the serial number I have the itunes account that I do
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1 -
How to change a phone number that was set-up when you first set Ipad up. Took wife's number instead of mine. Her number is on i-cloud and messaging, face time.
Goto -settings-iCloud-delete account u will then have to set up a new iCloud account.if u do this it will delete anything u may have backed up in iCloud on your old account.
-
How to get the total number of pages printed in a report?
Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.i found the solution, thanks
-
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer -
How to retrieve the vendor number during creation of Purchase Order?
Dear SAP experts,
For our Purchase Orders, during PO creation (t-code ME21 or ME21N) we want to achieve the following:-
1) default the delivery address to our plant A address if the vendor is local and
2) default the delivery address to our plant B address if the vendor is foreign.
At the moment, we are trying to use the user exit enhancement "MMDA0001" to achieve the above.
The problem is how to retrieve the vendor number from the screen so we could pass the vendor number to ZXM06U32 to check the ktokk field in LFA1 table in the whether the vendor is foreign or local.
Thank you in advance.
Regards,
Alexu can do one thing, create 2 partner function, like 1 for local, and second for import vendor.
or make 2 batch n activate vendor batch and make mandatory field from SPRO.
then goto SHD0, and do one by one step. first time take 1st requirement and second time take second . like that make two variant .
i dont know how much it will be helpful. bt i want to suggest smth like that only.
or, go for ABAPER help
thanks
nisha -
How to get the page number in the break section?
Hi expert,
The user wants the page number came right after the Break group name if the break section contains more than 1 page. E.g.
ABC Compnay
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 1
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 2
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
CDE Company
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
How to get the page number in section break level?Hi Wes
* Create a Field on the margin.
* Set its "Source" to "Page Number"/"Physical Page Number".
* Click "Page Numbering" button.
* In "Reset At" list box, choose the Repeating frame that surrounds your detail group in the layout.
This should cause Reports to increment the page number until the "Company" repeating frame resets.
Regards
Sripathy -
How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"
How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"?
I have an install SQL scripts that creates a Linked Server. I want to put some security on the Linked Server and only grant the Agent Job Signon (the "Run As" or "Executed as User") access to the linked server. I need to retrieve the
Agent Job Signon (something like "NT SERVICE\SQLAgent$FIDEV360BI02").
I could query certain jobs and SUBSTRING the Message column - using some form of the query below, which would return "Executed as user: NT SERVICE\SQLAgent$SSDEVBI02. The step succeeded." But that is pretty imprecise.
use msdb
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration,
[Retries] = HIST.retries_attempted
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
-- CHANGE THIS
-- WHERE JOB.name like '%GroupMaster%' or Job.name like '%etlv%'
ORDER BY HIST.run_date, HIST.run_timeby default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!! -
How to get the Page Number in CS3 with VB?
Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com -
How to get the document number for a ware house order.
Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advanceThere are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material.
Maybe you are looking for
-
How to Support IDS in ASA 5505 and 5520?
Dear All; we have the following HW configuration for the ASA 5505 and ASA 5520, We need to add the Intrusion Detection System (IDS) functionality to both ASA. My question is: what is/are the module(s) required to support this function, and what is t
-
Photos sent from my phone discarded
photos sent from my phone discarded
-
Query,insert,update and delete in forms6i
Hi i am new to forms6i, when i tried to update or delete the record it is giving error "FRM-40508 Oracle error: unable to insert record". when i hardcode the update statement it is executing fine. i have checked my sql statement at alert box, it is f
-
Can I embed audio files in a pdf document or epub file?
-
HT4437 how to record video from computer to iphone 4s
how to record a video from my computer to my iphone 4s?