How to get TLF textboxes to format text properly

I am attempting to use the Adobe Flash Professional CS5 Classroom in a book. When performing lesson 7, which is about TLF text, the text doesn't format properly in the textboxes that are linked textboxes. When copying and pasting text into the linked textboxes the text is bunched up like the lines are stacked one on top of another and it looks like a blob of black ink. According to the Adobe book it supposed to automatically spread out and format between all the linked textboxes. It doesn't. It stays all bunched up. Does anyone know what is causing this and how to make the TLF linked textboxes format properly?
Thank you.

hi Michael,
Thanks for the reply, I found some filter suggestions from another website as follows:
Get-MailboxPermission "[email protected]" | where { ($_.AccessRights -eq “FullAccess”) -and ($_.IsInherited -eq $false) -and -not ($_.User -like “NT AUTHORITY\SELF”) } | ft User -AutoSize
Get-RecipientPermission "[email protected]" | Where { ($_.AccessRights -eq “SendAs”) -and -not ($_.Trustee -like “NT AUTHORITY\SELF”) -and ($_.IsInherited -eq $false)} | ft Trustee -AutoSize
They work for the moment, but since they are not Office 365 official I don't know whether it will break if I have more users.
Also is it possible to get output in CSV or XML format instead of text. If not possible, can you provide me how to parse the text format?
thanks and regards,
--Leo

Similar Messages

How to get iPhone Safari to format text for its screen

My wife loves her iPhone, but there's one thing that's very frustrating: Safari likes to format pages so that only a small portion fits on the screen, and you have to scroll left and right to read the text. If you use a "pinch" to shrink the window, the font size also shrinks so that the text becomes unreadable.
I've tested this with a few very simple HTML pages that I've created, just text with a few andtags, and nothing with a width= or size= attribute. We still have the same problem. Safari doesn't seem to want to wrap the text at all; it either displays a page at a tiny font or in a readable font with most of the text off the screen.
I've also tested these pages with assorted other browsers, including Safari and the other dozen browsers I've installed on this Macbook Pro. All of them automatically wrap the text to fit whatever size window I use, including some very tiny windows. Also, the browser on my G1 "google" phone handles the pages just fine, using my default font and reformatting automatically when I rotate the phone to landscape format so that the text fits within the window.
The only browser I've seen this problem with is on the iPhone. found the Settings screen, looked through the Safari settings and didn't see anything relevant.
Any ideas what's wrong here? Or is the iPhone's Safari just flakey for simple text?

The pinching gesture is used to zoom in and out on a page. It's not resizing the window.
OK; I obviously don't know the right jargon. That's why I posted on a general discussion "support" forum rather than looking for a more technical one; I was hoping that my incorrect n00b terminology could be tolerated enough for people to try to understand the problem and point at some clues.
To try to explain it in different (and probably still not correct) terminology, Safari on the iPhone acts like it's formatting the text of even my simple HTML text pages for a large physical "page", and giving me a choice of how I want to view it. I can zoom out and see the whole piece of text, but the font is so tiny that it's unreadable (even with a magnifying glass . Or I can zoom in, in which case the screen becomes a small window that shows only a small portion of the text, and I have to pan left and right to read it, because the "page" width is now several times the screen width. Both choices make for slow, difficult reading.
I don't see this behavior in any other of the couple dozen browsers on 4 or 5 machines. What they do is respond to a change in the "window" size by reformatting the text so it fits within the window's width, scrolling off the bottom if there's too much text. This is easy to read, because vertical scrolling works well on all of them, and there's no need to pan left and right while reading a line of text.
This was pretty much how HTML and browsers were originally intended to work, with the browser doing line wrapping as needed to fit the available screen width. The screen as a window into a much larger page is seen much less often. When it is seen, it's mostly because the web designers included lots of "width=" attributes to force the page to be some minimum width, typically much wider that any smartphone's screen. But my test pages don't do this, and all other browsers successfully format them to be readable even in very narrow windows. Our iPhone's Safari doesn't seem to do this formatting; it formats the text for a width wider than the screen even when there's no formatting information in the HTML.
The obvious question is: Can the iPhone's Safari be persuaded to use more common scheme of doing line-wrapping to make the text fit into the visible screen?
The G1's browser has an especially impressive demo of how it could be done. If I rotate that gadget, it reformats between portrait and landscape mode on the fly, and the text is always line-wrapped to fit the current screen width. So a paragraph that takes, say, 7 lines in portrait mode will switch to 4 lines as I rotate it to landscape mode, with the same font size. The iPhone has the same sort of switching, of course, but it "reformats" the text by changing the zoom factor, which isn't nearly the same thing. And for some of my test pages, the text runs off the right margin in both portrait and landscape mode. I have no clue why it chooses a "page" width that's so much wider than the screen, sometimes 4 or 5 times the screen width, but that's what it does, and it's very hard to read.
So is there a way to tell it to stop doing this, and use line wrapping like other browsers do to fit the text into the visible screen width?

How to get report in excel format instead of pdf from oracle forms.

Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdf

create a report using report builder.
call the report from form using the following procedure
DECLARE
     RO_Report_ID REPORT_OBJECT;
     Str_Report_Server_Job VARCHAR2(100);
     Str_Job_ID VARCHAR2(100);
     Str_URL VARCHAR2(100);
     PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
     IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
     END IF;
     PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
     RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
     Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
     Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
     Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
     Str_URL      := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
     WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
     DESTROY_PARAMETER_LIST(PL_ID);
END;

How to get summary columns in delimited text file

How to get summary columns in delimited text file
I am trying to generate a delimited text file output with delimited_hdr = no.The report is a Group above report with summary columns at the bottom.In the text file the headers are not getting repeated & thats ok.The problem is the summary data is getting repeated for each row of data.Is there a way where i will get all the data & summary data will get displayed only once.I have to import the delimited text file in excel spreadsheet.

Sorry there were a typos :
When I used desformat=DELIMITEDDATA with desttype=FILE, I get error "unknown printer driver DELIMITEDDATA". When you look for help, DELIMITED is not even listed as one of the values for DESTFORMAT. But if you scroll down and look for DELIMITER it says , this works only in conjuction with DESTFORMAT=DELIMITED !!!!!!??!! This is in 9i.
Has this thing worked for anybody ? Can anyone please tell if they were able to suppress the sumary columns or the parent columns of a master-detail data for that matter ?

How to get rid of the main text box in the back of the page AND move things

I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

Hi, Dylan. Welcome to Discussions.
If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
Also, you can create a text box the width of the page and then set it for 2 or more columns.
When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
Hope this helps to get you started.
Walt

How to get paragraph number of selected text in ID CS4

Hi,
Can anybody help me how to get paragraph number of selected text in Indesign cs4.
Thanks,
Gopal

Ah, I see -- thanks. Turns out that there's no difference in speed between texts.itemByRange(), characters.itemByRange(),and insertionPoints.itemByRange(). In a document with 170 pages of text, and with the cursor in the last paragraph, the second and third lines, below (and your function), give exactly the same result:
t = app.selection[0];
t.parentStory.texts.itemByRange (t.parentStory.insertionPoints[0], t).paragraphs.length;
t.parentStory.characters.itemByRange (t.parentStory.characters[0], t).paragraphs.length;
Peter

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

How to get Default (System) Date Format Pattern?

How to get system default date format which is defined in Regional Setting of Control Panel.
We can get an instance of DateFromat using DateFormat.getDateInstance(DateFormat.SHORT) but problem is that there is no toPattern() exist in class DateFormat.
However toPattern() exist in class SimpleDateFormat but there is no costructor like SimpleDateFormat(DateFormat)
So please advise me, how can I get system short date format pattern?
Thanks
GAJESH TRIPATHI

I reterieve the system date format but not which is currently defined in regional setting of control panel but it returns the format which is installed by default when windows(os) is installed.
Edited by: gajesh on ? ????????, ???? ??:?? ?????????
Thanks to provide me solution. My source code related problem is solved but still I am not getting format which is defined in control panel. but By Letting that it is not possible in Java,... I am doing my next work...so CLOSE THIS TOPIC Thanks'n Bye.

How to get the date time format in OCI

How to get a date time format in OCI instead of only date

You would have to use the OCIDateTime datatype for this. Refer to
OCI documentation for more details.

How Adobe gets DATE and its format?

Hello,
I am getting current (todays) date by using below JS in some flds, and by using below FormCalc for some flds into my_form,
JS:
var currentTime = new Date()
Form Calc:
$.rawValue = num2date(date(), DateFmt(MM/DD/YYYY))
But, i dont have much idea that how adobe is getting this date? For my company this is the very first form, hence they are asking me how adobe gets date and its format whether,
1) From local IP/Interner provider address's date, format?
2) or user PC/laptop's LOCAL settings date, format? if so, for example, if Germany user (Laptop settings) has a DD.MM.YYYY configured, if this user comes to US on a busines trip and if that user opens the form, then how the date looks like for this user? as per user laptop settings DD.MM.YYYY or local internat provider date format MM//DD//YYYY?
Thank you

Hi,
the date() function returns the number of days since 01.01.1900 for the local date of the current system (related to the system clock of the OS).
If you travel from Germany to the US but don't update your date/time settings, then it returns the same date in the US as in Germany.
You can check the behavior by changing your local date/time setting or the timezones.

Does anyone know how to get a white line across text like the USA basketball logo?

does anyone know how to get a white line across text like the USA basketball logo?

Draw the shape which is to be knocked out (a line in the example) in a layer above the logo. The colour doesn't matter because it will be made invisible.
Double-click in the space to the right of the layer's name in Layers panel to open its Layer Style window where advanced blending can be modified.
Set Fill Opacity to zero and Knockout to "Deep" or "Shallow" depending on whether the knockout should be limited to a containing Group.

How to get the system date format string?

Hello, everybody!
I want to create a MaskFormatter with a mask for dates. So, I could suply as the constructor parameter: "##/##/####'. However, what if the year comes first in the current system date format settings, or the month is in the second place or in the first?... So, I can't just suppose that the current locale format for dates is like the one above. So, my question is: is there a way to get the SYSTEM DATE FORMAT STRING in Java? Searching in google I saw that this was already asked in this forum:
http://forum.java.sun.com/thread.jspa?threadID=301034&messageID=1193794
but there was no effective answer. Does someone already know how to get this?
Thank you.
Marcos

Hi, not sure, but
import java.text.*;
SimpleDateFormat sdf = new SimpleDateFormat();
System.out.println(sdf.toPattern());
will output something like dd/MM/yy HH:mm
hthThank you very much. It worked.

How to get values of all input text of a form?

Hi,
I would like to know how to get all input text value of a form?
I try this:
        List values = new ArrayList();
        values = getBindings().getAttributeBindings();
        for (Iterator iterator = values.iterator(); iterator.hasNext();) {
            Object o = iterator.next();
            if (o != null) {
                if (o instanceof FacesCtrlAttrsBinding) {
                    System.out.println("Trace iterator=" + ((FacesCtrlAttrsBinding)o).getName());
src
In my jspx, I use panelTabbed component which is in af:form
With this code, I get all bindings name.
So I change the [structure |http://h.imagehost.org/0922/jdev.png] putting af:form in each item of my af:panelTabbed without succes.
The code trace all bindings again, and I just want to get the input text of the form (like *$_POST*, or *$_GET* in php)
How to do that?
Thanks for your help.

Hi,
I try this:
private UIComponent getUIComponent(String name) {
      FacesContext facesCtx = FacesContext.getCurrentInstance();
      return facesCtx.getViewRoot().findComponent(name) ;
src
I post the structure again.
I try:
// f1 id of af:form
UIComponent test = getUIComponent("f1");
test is not null
// pfl1 id of af:panelFormLayout
UIComponent test = getUIComponent("pfl1");
but here test is null
I try
// f1 id of af:form
// pt1 id of af:pageTemplate
// pt2 id of af:panelTabbed
// sdi1 id of af:showDetailItem
// ps1 id of af:panelSplitter
// pgl32 id of af:panelGroupLayout
// pfl1 id of af:panelFormLayout
UIComponent test = getUIComponent("f1:pt1:pt2:sdi1:ps1:pgl32:pfl1");but I have this:
Error 500--Internal Server Error
javax.servlet.ServletException: java.lang.IllegalArgumentException: f1So I add
private static final char SEPARATOR_CHAR = ':';But I have the same error.
getUIComponent returns null with pt2,sdi1, ps1, pgl32, pfl1 and not null with f1, pt1.
I don't know why...
How can I get children (af:inputText) of pfl1 ?
Thanks

How to get the medium and long text for PRODUCT HIERARCHY?

hi experts,
i am using data source called 0prod_hier_text. in ECC there is description for medium and long.
but in BW it is mapped to 0TXTSH which is short text, and in the transformations medium text is mapped to short text of BW (0TXTSH) which is having length only 20.
IF it exceeds more than 20 it is now showing.
so how to get add 0TXTMD which is medium text so that i can see the description for MEDIUM.
i did try to add to 0PROD_HIER but i cannot add.
i need to show medium text description in the Report.
plz provide me the input.
regards
venuscm

Hi Venu,
Check in RSD1 screen which text you have chossen .....for object 0product
try to check for medium & long text(if not checked) ..
so that you can add mdtxt & long txt in transformations........
hope this will help you.
Thanks,
Vijay.

How to get peoplepicker multiple value in text box?

Hi All,
How to get multiple selection people-picker value into text box while using InfoPath?
Thanks in advance!

Hi,
According to your post, my understanding is that you wanted to get peoplepicker multiple value in text box.
You can set the default value of the text box to:
eval(eval(Person, 'concat(pc:DisplayName, "; ")'), "..")
Or change XPath (advanced) to
xdMath:Eval(xdMath:Eval(../my:group/pc:Person, 'concat(pc:DisplayName, "; ")'), "..")
More information:
Use Person/Group Picker in Infopath form to send multiple contacts to a SharePoint Workflow
InfoPath Forms – Show Person/Group Picker Values in Text Box
InfoPath Reference to Undeclared Namespace Prefix: ‘PC’
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to get TLF textboxes to format text properly

Similar Messages

Maybe you are looking for