How to give out a status message indicating the number of fields selected

Hi experts,
I hope some one might have done what I'm trying to do. Could some one please show me how to give out a status message saying for example how many fields have been give out(or selected) in the t_ouput in an alv grid? Is there a FM that could do this? I mean like giving the FM the t_output and it will show a status message with the number of fields selected?
Thank you for your input.
Nadin
Message was edited by:
nadin ram

Hi Ram,
Write this code,
Message 'Select Only Ten Fields' type 'I'.
It displays The Message in Message Box.
Or if you want the Error Message means,
Message 'Select Only Ten Fields' type 'E'.
Thanks,
reward If Helpful.

Similar Messages

When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message. How can I change the mail settings so that every reply is listed

When I receive and answer e-mail, the correspondence is usually "nested" "behind" the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox. How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message. I'm afraid I might accidentially overlook messages the way they are handled now.

Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread". I think that will make each message show individually.

Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

When selecting a song to play in iTunes, I get an error message indicating the song could not be used because the original file could not be found. Would you like to locate it. I have no idea where to look since the library hold all my files.

When selecting a song to play from iTunes library, I continually get an error message indicating the original file could not be found. Then asks, would you like to locate it? Does anyone know how to fix this? I'm not even able to play the songs I purchased due to this error message. Any ideas how to remedy this problem?
Thanks

It would help to have more background about your iTunes collection such as if you keep it on an external drive, or if you have moved or renamed anything recently. iTunes is very sensitive to you renaming or moving files or folders involved with your media. iTunes only keeps a reference to where a media file is located and then goes to look for it when you try to play it. If you have changed things since it was added to itunes then it's like me sending you to look for a friend in my addressbook but that friend has moved.
The other possibility is your computer is starting to lose files. Again, the computer uses a reference database to tell it where on the drive to look for a file. If that database gets corrupt then it starts losing files. Use Dsk Utility's first aid to verify your hard drive.

How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?

How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.

You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
HL-DT-ST DVD-RW GH41N:
Model:          HL-DT-ST DVD-RW GH41N
Revision:          PQ06
Serial Number:          K3D9BH92251
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Hitachi HDP725050GLA360:
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          Hitachi HDP725050GLA360
Revision:          GM4OA5CA
Serial Number:                GEA534RJ06E63A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
OSXLION:
Capacity:          499.25 GB (499,248,103,424 bytes)
Available:          192.76 GB (192,758,513,664 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk1s3
Content:          Apple_Boot
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity:          2 TB (2,000,398,934,016 bytes)
Model:          WDC WD2002FYPS-02W3B0
Revision:          04.01G01
Serial Number:               WD-WCAVY7048785
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk3
Rotational Rate:          5400
Medium Type:          Rotational
Bay Name:          Bay 2
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk3s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk3s1
Content:          EFI
BU2TB-Time:
Capacity:          2 TB (2,000,054,960,128 bytes)
Available:          1.1 TB (1,096,926,654,464 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2
Mount Point:          /Volumes/BU2TB-Time
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD10EAVS-00D7B1
Revision:          01.01A01
Serial Number:               WD-WCAU43604330
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
Data:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          715.55 GB (715,549,786,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
Intel ICH10 AHCI:
Vendor:          Intel
Product:          ICH10 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1003FBYX-01Y7B0
Revision:          01.01V01
Serial Number:               WD-WCAW31850957
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk2
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 4
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk2s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk2s1
Content:          EFI
BUOSXLION:
Capacity:          999.86 GB (999,860,912,128 bytes)
Available:          697.88 GB (697,881,690,112 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk2s2
Mount Point:          /Volumes/BUOSXLION
Content:          Apple_HFS

How to find out web-inf path from the physical drive?

How to find out web-inf path from the physical drive?
I have some user profiles in web-inf directory.SO I want to know the path from root directory like
d:/program files/allaire/jrun/appname/web-inf/profiles/username like that.
Presently I am able to get the path upto the application directory and from that I am concatinationg web-inf/profiles/username .
But it is giving problems when it is deployed under unix or linux.Because web-inf there it treats as WEB_INF
SO I want to get the path of web-inf directory with out hard coding.
Thanku

String path = application.getRealPath("/WEB-INF/profiles/username");
Note sure why you need this, but you don't need the real path to read the file - you can get an InputStream using the relative path. See ServletContext getResource() and getResourceAsStream().

How do I forward a text message with the iPhone?

How do I forward a text message with the iPhone?

You could take a screen shot (hold and release both buttons simultaneously) and then email the resulting image to someone.
// crude workaround for now...

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem?

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.

It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

How can we get a alert message in the current browser we are using the mom

how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AM

pauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way..

How do I keep my status bar at the top and not moving from side to side and bottom of phone

how do I keep my status bar at the top of my phone? I let my grandsn play a game on my phone and after he gave it back I noticed my status bar would move from the top to the side or bottom etc

Reset, hold both home and power buttons until the iPhone begins to restart itself, ignore the slide to power off slider. Let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.
Probably do not need this, but Portrait Lock can be set by, pressing home button twice quickly, slide bottom row of icons to the right one time, tap the Portrait Lock icon.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

How to find out which objects are at the end of the datafiles

My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.

>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

How to find out which data control do the page layout components come from?

hi,
work in Jdev 11.1.2.3
After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
--i cannot find data control related information in the property pallete for the page layout component.
Regards.

This information can be found in the page definition file.
Select the field in the page and then click the binding tab.

How to find out the number of fields in generated proxy structure?

Hi All,
Can anybody help me to find out the number of fields in generated proxy structure in back end system along with controller fields.
i know how to get number of fields in XI system but i want the number of fields in back end system when we generate proxy including automatically generated controller fields.
Thanks in advance.
Regards,
Ujwalkumar

U mean u want to know at runtime?
Get the output from ur proxy as a string, count the number of "<" characters and divide it by 2. :-P
Of course, you'll have to treat the header fields separately.
Regards,
Henrique.

How to find out if your Mac has the new Virus ?

How to find out if your Mac has the new Virus, and how to fix it ???

Helpful Links Regarding Flashback Trojan
A link to a great User Tip about the trojan: Flashback Trojan User Tip
A related link in the tip to a checker: Malware Checker Dowload Link
A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started.
For now I recommend the User Tip from etressoft to detect and remove:
Checking for and removing the "Flashback" trojan
Kaspersky Flashback Trojan Site:Flashback Trojan Detection and Removal
Also see Apple's article About Flashback malware.

How to give out a status message indicating the number of fields selected

Similar Messages

Maybe you are looking for