How To Give Print Option In Module Pool

Hi ,
I am displaying the Output in table control. I have to give the Print option. I have tried to enable the same in the PF status but it is not working as it is in Report.
Regards,
Srinivas

Use FM FITRV_PRINT_TABLE_CONTROL_DATA. It's the efficient and best way to print table control data.
check the link
Print Table Data.

Similar Messages

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

Please help me out with the function code of print option in module pool

please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asif

Hi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LP01'                       "'Printer name
    list_name              = 'TEST'
    list_text              = 'SUBMIT ... TO SAP-SPOOL'
    immediately            = ' '
    line_size              = '2000'
    no_dialog              = 'X'             "pass space to Pop screen for Print option
IMPORTING
    out_parameters         = wa_pri_params
    valid                  = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
     "and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas

How to make select option in module pool

Hello,
Can anybody tell me how to create a select option in module pool screen..?
thanks

Easiest way is to create a subscreen and embed this in your dynpro.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

Provide print option on module pool screen

Experts,
There is a urgent requirement where in I have to provide PRINT option just as in standard SAP screens, on to my module pool screen, ie I need to provide a option in the menu of the module-pool screen,up on selecting it should work as in the standard SAP-screen print option.
Correct answers will be promptly rewarded.
Regards,
Ram.

Hi,
Enable the print function from Menu painter and code the printing functionality.
For coding the print functionality refer to the link :
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dba5ef35c111d1829f0000e829fbfe/content.htm
Thanx & Rgds.

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

Getting select options in module pool screen

hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijay

Hi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
 IF NOT vbeln_low LE vbeln_high.
 MESSAGE e899 WITH text-007. "high value is smaller than low value
 ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
 r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
 r_vbeln-option = 'BT'. "if user takes both low & high value
 r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 title = text-002
 text = ' '
 signed = 'X'
* lower_case = ' '
* no_interval_check = ' '
* just_display = ' '
* just_incl = ' '
* excluded_options =
* description =
* help_field =
* search_help =
 tab_and_field = tab
 TABLES
 range = r_vbeln
 EXCEPTIONS
 no_range_tab = 1
 cancelled = 2
 internal_error = 3
 invalid_fieldname = 4
 OTHERS = 5.
IF sy-subrc EQ 2.
 MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Select Option on Module Pool screen

How to display select options on Module Pool screen ?

Via the search functionality, you will find something like :
SELECTION-SCREEN BEGIN OF SCREEN 101 AS SUBSCREEN.
SELECT-OPTIONS: S_CARRID FOR SPFLI-CARRID,
S_CONNID FOR SPFLI-CONNID.
SELECTION-SCREEN END OF SCREEN 101.
and to use a CALL SELECTION-SCREEN xxxx in your module pool.
regards,
Hans

How can i decleare select-options in module pool table control?

Hi everybody!!
Can anyone tell me how can I decleare select-options in module pool table control screen?. I have declared it in a screen with a table control but a dump is triggered due to an error when generating the selection screen.
Regards...

My suggestion will be try to use fm
call function 'FREE_SELECTIONS_DIALOG'
Please search this forum you can find lot of threads related to this.
a®

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating select-option is dialog prog follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request], use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

How to get calender in f4 helpfor select options in module pool (urgent)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi,
Check this Example..
Tables:Mara.
Select-options:s_matnr for mara-matnr.
Types:Begin of i_mara,
       matnr like mara-matnr,
       end of i_mara.
data:it_mara type standard table of i_mara.
At selection-screen on value-request for s_matnr-low.
Select matnr from mara into table it_mara.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'MATNR'
    PVALKEY                = ' '
     DYNPPROG               = SY-REPID
     DYNPNR                 = SY-DYNNR
     DYNPROFIELD            = 'S_MATNR-LOW'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = IT_MARA
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
   EXCEPTIONS
     PARAMETER_ERROR        = 1
     NO_VALUES_FOUND        = 2
     OTHERS                 = 3

How to attach FCODE to select option in Module Pool

Hi all,
 I have created Select option in Module pool by attaching a Subscreen. Now when user enters any value into the select option I need to fetch values from the database in to the table control based on the value entered in select option.
Is it possible and how?
Thanks.

Hi
If u have one select options in module pool programming,Then there is no need for FCODE
bcoz FCODE is needed for push button,check box..like etc.
But select option is a input field.
So u can trace the input as u have done in report
Like
select * from dtab1 into corresponding fields of table itab where field1 in selectoption.
Or if u want that program to be executed after giving input in select option then user will press F8
So Use FCODE 'F8'.
Regs
Manas Ranjan Panda
Message was edited by:
 MANAS PANDA
Message was edited by:
 MANAS PANDA

Select-option in module pool with table Control

HI,
How to use the select-option in Module Pool and how Can i use the Table control in it.
Can any body give me some Clues.
with rgds
Ranjith

Hi ..
PBO.
LOOP at <table contriol>
module --- Inside the module
DATA: g_uti TYPE REF TO cl_fobu_input_util.
if rollname <> space.
 CREATE OBJECT g_uti
 EXPORTING typename =rollname.
*....convert to external pattern
 CALL METHOD g_util->output_convert
 EXPORTING
 field_value_int = p_value " This is Tablecontrol-low
 IMPORTING
 field_value_ext = p_value. " Retrun value for Low
ENDLOOP.
lly you have code in PAI
DATA: g_util_1 TYPE REF TO cl_fobu_input_util.
if rollname <> space.
 CREATE OBJECT g_util_1
 EXPORTING typename = rollname.
*....convert to internal pattern
 CALL METHOD g_util_1->input_convert
 EXPORTING
 field_value_ext = p_value
 IMPORTING
 field_value_int_c = p_value.
The above code should be written for tablecontrol-high aswell..
you can also refer: Inlcude LSE16NF10 line no 341 & 434 (SE16n)
Nag

How To Give Print Option In Module Pool

Similar Messages

Maybe you are looking for