How to handle clips properly (recording and cutting)

Hi Adobe Forum
I have alittle problem, I need to be educated in Adobe Preimere Pro (5.5)
I do some recording and I end up with a .TS file, which idd like to cut to short videos for Youtube.
However there sometimes is black around the footage, which needs to be cut away.
I know how to do that, but when I render it the Quality loss is so high that I believe I must be doing things wrong.
I am thinking that, it might have something to do with the presets I use.
I have the original clip, it looks good and sharp and then the rendered preview is blur'ed and not that good
How is this done correctly?

littlebear9 wrote:
I just got a Samsung Intensity. I got on my phone and downloaded a bunch of songs I want to use as ringtones, especially using a specific tone for each caller in my contact list (ie. contact id). But, when I went to manage them online here, it doesn't show them. And, even tho I set a ringtone for each contact, all that plays when any one of them calls is my "default" ringtone. Did I download from the wrong place? What did I do wrong?
If you downloaded whole mp3's (songs) then they would be in your My_Music folder - and you can't use a whole song as a ringtone, just a 30 second or less clip. If you downloaded actual ringtones, then you need to save them as a ringtone from the text message (right soft key Options>>Save as ringtone)
If we are talking about songs, you'll need to use an audio editor (Audacity is free to download to your computer; online services like phonezoo are also free) to create 20-30 second clips that you can send to your phone as a text message and save as a ringtone from there.
Once the files are listed in your ringtones folder on the phone, you can assign them to your contacts, either from the ringtone list, or from within your contact list. In your post you said you set a ringtone for each contact....did you SAVE the contact after assigning the ringtone?
When you say "manage them online" - you don't manage ringtones online, but you do manage ringBACK tones online....are we talking ringBACK tones or ringtones?

Similar Messages

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the bad record while using bulk collect with limit.

Hi
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
Example:
I am inserting into table with LIMIT of 1000 records and i've got error at 588th record.
i want to commit the transaction with 588 inserted record in table and log the error into
error logging table then i've to continue with transaction with 560th record.
Can anyone suggest me in this case.
Regards,
yuva

>
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
>
Use the SAVE EXCEPTIONS clause of the FORALL if you are doing bulk inserts.
See SAVE EXCEPTIONS in the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/tuning.htm
And then see Example 12-9 Bulk Operation that continues despite exceptions
>
Example 12-9 Bulk Operation that Continues Despite Exceptions
-- Temporary table for this example:
CREATE TABLE emp_temp AS SELECT * FROM employees;
DECLARE
TYPE empid_tab IS TABLE OF employees.employee_id%TYPE;
emp_sr empid_tab;
-- Exception handler for ORA-24381:
errors NUMBER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(dml_errors, -24381);
BEGIN
SELECT employee_id
BULK COLLECT INTO emp_sr FROM emp_temp
WHERE hire_date < '30-DEC-94';
-- Add '_SR' to job_id of most senior employees:
FORALL i IN emp_sr.FIRST..emp_sr.LAST SAVE EXCEPTIONS
UPDATE emp_temp SET job_id = job_id || '_SR'
WHERE emp_sr(i) = emp_temp.employee_id;
-- If errors occurred during FORALL SAVE EXCEPTIONS,
-- a single exception is raised when the statement completes.
EXCEPTION
-- Figure out what failed and why
WHEN dml_errors THEN
errors := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE
('Number of statements that failed: ' || errors);
FOR i IN 1..errors LOOP
DBMS_OUTPUT.PUT_LINE('Error #' || i || ' occurred during '||
'iteration #' || SQL%BULK_EXCEPTIONS(i).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error message is ' ||
SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE));
END LOOP;
END;
DROP TABLE emp_temp;

How to restrict the last record and not moving to next reocrd

1) how to restrict the last record and not moving to next reocrd.
2) Also for the F6 key(for new record).

When you are on the last record, next-record will create a new one, so that my question is do you want to forbid new record creation.
Francois

How to insert a sound recording and save it to iTunes?

How to insert a sound recording and save it to iTunes?
I have 5 voice recording on my iPhone, but the fifth was not detected on iTunes.So i can't sync

Hi,
According to my analysis, for Digital Signatures: Adobe has changed the behavior around digital signatures and SharePoint-hosted PDF files. Now, when digitally signing a SharePoint-hosted PDF file, it will be saved directly to SharePoint if that PDF file
is already checked out. If not, the user will be prompted to check it out. When digitally signing a SharePoint-hosted PDF file in Acrobat X, Version 10.0, the user would be prompted to save that file locally and would then need to upload it separately to SharePoint
as a new version.
I suggest that you use Acrobat X, then check the result. For more information about Acrobat X, please refer to
http://blogs.adobe.com/pdfitmatters/2011/06/whats-new-in-acrobat-x-version-10-1.html
In addition, you can also consider the following third-party tool:
http://www.arx.com/digital-signature/sharepoint
Thanks,
Rock Wang

How do I insert new record and get results on a landing page

how do I insert new record and get results on a landing page

It's not clear from your post what you are asking. In a SQL database, you use the INSERT statement to insert a row into a table. You use the SELECT statement to retrieve rows. Here's some basic info on how to do that within PHP
PHP MySQL Insert Into
PHP MySQL Select

How to handling ecxeptions on alv and how to write subrotiens on scripts

Hi abapers..
tell me how to handle ecxeptions on ALV, and how many exceptions are there ,which exception i have to use.
AND is it possible to write subrotiens on script, if it is possible tell to me how to write

There are already enough Exceptions provided for ALV .
yes you can write sub-routines in scripts , search SDN and you will get answer for the same

How to handle the selected record

how to handle the selected record when using alv classes

Hi,
use method : get_current_cell
CALL METHOD grid1->get_current_cell
                      IMPORTING es_row_id = ls_row_id
                                es_col_id = ls_col_id
                                 e_value = l_value.

How to handle the failed records from the table when using DB Adapter

Hi,
I am reading some records from table using DB Adapter inside my synchronous BPEL process. Say like reading 100 records from table in between after successful reading of 90 records an error occured in 91st record due some various reasons(like DB down, Connection interrupted etc.). Then how to handle this situation, whether i have to read all the records from the begining and is there any option to continue from where it stopped reading.
Can please anybody help me out in the regard?
Thanks in advance
Regards,
Aejaz

we had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M.

How to handle table type record in OAF

Hi ,
Req:
There is a search page that can be accessed from different locations .
The result set should be different when accessed from each location .
Approach to be used :
Call a PL/SQL api which returns a table type input parameter for different search conditions . Each record that is returned by the table type input needs to be iterated and a new row should be created in a transtient VO to show results on the UI
Problem :
How to handle to table type input returned from pl/sql in java and show the results?
Thanks in advance.

There is a requirement to fetch records from cursor into a collection .Following is the code snippet that I have used.
/** creating an object **/
CREATE OR REPLACE TYPE XXCRM_GBL_DSW_AUDIT_RSTLS_O_TP AS OBJECT (
CUSTOMER_NAME VARCHAR2(360),
PROJECT_NAME VARCHAR2(40),
BOARD_NAME VARCHAR2(40),
ARROW_UNIQUE_NO NUMBER,
FIELD_NAME VARCHAR2(2000),
OLD_VALUE VARCHAR2(2000),
NEW_VALUE VARCHAR2(2000),
USER_ID NUMBER,
USER_NAME VARCHAR2(100),
AUDIT_DATE DATE,
AUDIT_TYPE VARCHAR2(1),
SUPP_SYS_LAST_UPDATE_ON DATE,
SUPP_TRACKING_NUM VARCHAR2(50),
CONSTRUCTOR FUNCTION XXCRM_GBL_DSW_AUDIT_RSTLS_O_TP
RETURN SELF AS RESULT
/** initializing the object **/
CREATE OR REPLACE TYPE BODY XXCRM_GBL_DSW_AUDIT_RSTLS_O_TP IS
CONSTRUCTOR FUNCTION XXCRM_GBL_DSW_AUDIT_RSTLS_O_TP
RETURN SELF AS RESULT IS
BEGIN
self.customer_name := fnd_api.g_miss_char;
self.project_name := fnd_api.g_miss_char;
self.board_name := fnd_api.g_miss_char;
self.arrow_unique_no := fnd_api.g_miss_num;
self.field_name := fnd_api.g_miss_char;
self.old_value := fnd_api.g_miss_char;
self.new_value := fnd_api.g_miss_char;
self.user_id := fnd_api.g_miss_num;
self.user_name := fnd_api.g_miss_char;
self.audit_date := fnd_api.g_miss_date;
self.audit_type := fnd_api.g_miss_char;
self.supp_sys_last_update_on := fnd_api.g_miss_date;
self.supp_tracking_num := fnd_api.g_miss_char;
return;
END;
END;
/** creating a collection of object**/
CREATE TYPE XXCRM_GBL_DSW_AUDIT_RSTLS_C_TP AS TABLE OF XXCRM_GBL_DSW_AUDIT_RSTLS_O_TP;
/**Inside the package body **/
CURSOR c_proj_cur is
SELECT NULL CUSTOMER_NAME,
(SELECT project_name
FROM xxcrm_gbl_dsw_projects_all
WHERE project_id = xgda.project_id) PROJECT_NAME,
DECODE(xgda.board_id,NULL,'test',
(SELECT board_name
FROM xxcrm_gbl_dsw_boards_all
WHERE board_id = xgda.board_id)) BOARD_NAME,
DECODE(xgda.internal_dwr_id,
NULL,NULL,
(SELECT internal_dwr_id
FROM xxcrm_gbl_dsw_regstrations_all
WHERE internal_dwr_id = xgda.internal_dwr_id)) ARROW_UNIQUE_NO,
fielslu.meaning FIELD_NAME,
xgda.old_value OLD_VALUE,
xgda.new_value NEW_VALUE,
xgda.created_by USER_ID,
'kuldeep' USER_NAME,
xgda.Creation_Date AUDIT_DATE,
xgda.audit_Level AUDIT_TYPE,
SYSDATE SUPP_SYS_LAST_UPDATE_ON,
't001' SUPP_TRACKING_NUM
FROM XXCRM_GBL_DSW_AUDIT_ALL xgda ,
FND_LOOKUP_VALUES_VL fielslu
WHERE xgda.project_id =174
AND fielslu.lookup_type = 'XXCRM_DSW_REV_FIELD_NAMES'
AND fielslu.lookup_code = xgda.FIELD_NAME
AND enabled_flag = 'Y'
AND TRUNC(SYSDATE) BETWEEN TRUNC(NVL(fielslu.start_date_active,sysdate))
AND TRUNC(NVL(fielslu.end_date_active,sysdate))
ORDER BY xgda.creation_date;
Tab XXCRM_GBL_DSW_AUDIT_RSTLS_C_TP ;
BEGIN
OPEN c_proj_cur;
LOOP
FETCH c_proj_cur BULK COLLECT INTO tab; --ERROR type mismatch found at 'TAB' between FETCH cursor and INTO variables
END LOOP;
END;
/**Error */
When the above script is executed it gives an error “type mismatch found at 'TAB' between FETCH cursor and INTO variables” (at line highlighted above).
I have validated the data type of cursor and object too. But still the error is not resolved .
Did anyone of you come across a similar requirement, fetching the values from cursor into a collection? Please help.

How to Handle the chaned rows and new added rows into ALV in OPPS alv .

Hi All,
I have developed a [program in which i am able to append a row or change and existing row.
when i press save button and handle the user command in PAI of Screen, in the internal table of ALV some records are missing which are inserted in the last.
Could You please guide me how can i handle the change rows and appended rows
Regards,
Deepak

Hi ,
as avinash said , u need to use check_changed_data Method in order to get all records ,
code will be like this
PAI
user-command.
case sy-ucomm.
when 'ENTER'.
call method G_grid->check_changed_data.
call method g_grid->refresh_table_display.
when 'SAVE'.
call method G_grid->check_changed_data.
call method g_grid->refresh_table_display.

Certain web sites try to open a tab for billing or other info. fire fix 3 worked fine , 4 & 5 bring up a box asking how to handle a aspx file and nothing will work. am running XP service pack 3. how do I reload 3 again?

with firefox 3 everything works fine. with 4 and 5 when I try to complete billing info I get a question about how to handle aspx files. nothing works. all I get is a new tab with a blank screen, not data no nothing. When I loaded firefox 4 and had the problem I reinstalled 3 to solve it. I hoped when 5 came along it would include a fix, no such luck. I read many questions about AOL logon that is the same as my problem and have tried all the suggestions with no luck.

What are you expecting when the aspx window comes up, a PDF or a regular web page?
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (it usually worked with Firefox 4) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

How to loop through report records and update the record

I have a updateable report. And there is a select LOV in that report. How to loop though the report and save all the changes to the LOV.

1. Please tell us your first name and put it in your handle and/or profile to help us.
2. Explain your question in more detail, perhaps with an example and by showing code you already are using.
Scott

How to handle the deleted records from R3

Hello,
We have created a generic data source on a database table in R3 side and now we have a case where there is a huge volume of data gets deleted and new records get updated every day.
By doing a delta load we are able to load the New records and also the changed ones but we are unable to identify the deleted records from that table and move them to BI for deleteing those records in BI also.
Can any one please suggest a solution for the handling the deleted records.
Thanks,
Ravindra.

we had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M.

How to print the error records and success records in bdc

how to print the number of error records and success records in bdc

hai,
plz refer this program,
Z_130399130271_A
REPORT Z_130399130271_A
       NO STANDARD PAGE HEADING LINE-SIZE 325.
*INCLUDE YVALIDATE.
*include bdcrecx1.
INCLUDE YINCLUDE399.
DATA ITAB LIKE TABLE OF FILE_TABLE WITH HEADER LINE.
PARAMETERS: DATASET(132) LOWER CASE.
DATA : RC TYPE I,
ERR(40) TYPE C,
SUCCESSCNT TYPE I VALUE 0,
FAILCOUNT TYPE I VALUE 0.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
DATA: BEGIN OF RECORD OCCURS 0,
data element: LIF16
        LIFNR_001(016),
data element: KTOKK
        KTOKK_002(004),
data element: ANRED
        ANRED_003(015),
data element: NAME1_GP
        NAME1_004(035),
data element: SORTL
        SORTL_005(010),
data element: STRAS_GP
        STRAS_006(035),
data element: PFACH
        PFACH_007(010),
data element: ORT01_GP
        ORT01_008(035),
data element: ORT02_GP
        ORT02_009(035),
data element: LAND1_GP
        LAND1_010(003),
data element: REGIO
        REGIO_011(003),
data element: SPRAS
        SPRAS_012(002),
data element: TELF1
        TELF1_013(016),
data element: TELF2
        TELF2_014(016),
data element: BANKS
        BANKS_01_015(003),
data element: BANKK
        BANKL_01_016(015),
data element: BANKN
        BANKN_01_017(018),
      END OF RECORD.
DATA:   BEGIN OF ERRORITAB OCCURS 0,
        LIFNR_001 LIKE LFA1-LIFNR,
        KTOKK_002 LIKE LFA1-KTOKK,
        ANRED_003 LIKE LFA1-ANRED,
        NAME1_004 LIKE LFA1-NAME1,
        SORTL_005 LIKE LFA1-SORTL,
        STRAS_006 LIKE LFA1-STRAS,
        PFACH_007 LIKE LFA1-PFACH,
        ORT01_008 LIKE LFA1-ORT01,
        ORT02_009 LIKE LFA1-ORT02,
        LAND1_010 LIKE LFA1-LAND1,
        REGIO_011 LIKE LFA1-REGIO,
        SPRAS_012 LIKE LFA1-SPRAS,
        TELF1_013 LIKE LFA1-TELF1,
        TELF2_014 LIKE LFA1-TELF2,
        BANKS_01_015 LIKE LFBK-BANKS,
        BANKL_01_016 LIKE LFBK-BANKL,
        BANKN_01_017 LIKE LFBK-BANKN,
        ERRORMSG(60) TYPE C,
        SERIAL TYPE I VALUE '1',
    END OF ERRORITAB.
End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR DATASET.
CALL FUNCTION 'TMP_GUI_FILE_OPEN_DIALOG'
EXPORTING
    WINDOW_TITLE            = 'select a file '
    DEFAULT_EXTENSION       = 'TXT'
    DEFAULT_FILENAME        = 'ASSIGN5.TXT'
FILE_FILTER             =
INIT_DIRECTORY          =
MULTISELECTION          =
IMPORTING
RC                      =
    TABLES
      FILE_TABLE              = ITAB
EXCEPTIONS
   CNTL_ERROR              = 1
   OTHERS                  = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE ITAB INDEX 1.
DATASET = ITAB-FILENAME.
WRITE DATASET.
START-OF-SELECTION.
*perform open_dataset using dataset.
*perform open_group.
DATA T TYPE STRING.
T = DATASET.
IF T EQ ' '.
    MESSAGE E110(ZX).
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = T
FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    TABLES
      DATA_TAB                      = RECORD
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
    CLEAR RC.
    CLEAR ERR.
*read dataset dataset into record.
    IF SY-SUBRC <> 0. EXIT. ENDIF.
    RECORD-KTOKK_002 = '0001'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                                  RECORD-LIFNR_001.
    PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                                  RECORD-KTOKK_002.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-TELX1'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'LFA1-ANRED'
                                  RECORD-ANRED_003.
    PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                                  RECORD-NAME1_004.
    PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                                  RECORD-SORTL_005.
    PERFORM BDC_FIELD       USING 'LFA1-STRAS'
                                  RECORD-STRAS_006.
    PERFORM BDC_FIELD       USING 'LFA1-PFACH'
                                  RECORD-PFACH_007.
    PERFORM BDC_FIELD       USING 'LFA1-ORT01'
                                  RECORD-ORT01_008.
    PERFORM BDC_FIELD       USING 'LFA1-ORT02'
                                  RECORD-ORT02_009.
    PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                                  RECORD-LAND1_010.
    PERFORM BDC_FIELD       USING 'LFA1-REGIO'
                                  RECORD-REGIO_011.
    PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                                  RECORD-SPRAS_012.
    PERFORM BDC_FIELD       USING 'LFA1-TELF1'
                                  RECORD-TELF1_013.
    PERFORM BDC_FIELD       USING 'LFA1-TELF2'
                                  RECORD-TELF2_014.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=VW'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_FIELD       USING 'LFBK-BANKS(01)'
                                  RECORD-BANKS_01_015.
    PERFORM BDC_FIELD       USING 'LFBK-BANKL(01)'
                                  RECORD-BANKL_01_016.
    PERFORM BDC_FIELD       USING 'LFBK-BANKN(01)'
                                  RECORD-BANKN_01_017.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=UPDA'.
    PERFORM BDC_TRANSACTION USING 'XK01' CHANGING ERR RC.
    DATA: SERIAL TYPE I VALUE 1.
    IF RC <> 0.
      FAILCOUNT = FAILCOUNT + 1.
      CLEAR ERRORITAB.
      ERRORITAB-SERIAL = SERIAL.
      ERRORITAB-LIFNR_001 = RECORD-LIFNR_001.
      ERRORITAB-KTOKK_002 = RECORD-KTOKK_002.
      ERRORITAB-ANRED_003 = RECORD-ANRED_003.
      ERRORITAB-NAME1_004 = RECORD-NAME1_004.
      ERRORITAB-SORTL_005 = RECORD-SORTL_005.
      ERRORITAB-STRAS_006 = RECORD-STRAS_006.
      ERRORITAB-PFACH_007 = RECORD-PFACH_007.
      ERRORITAB-ORT01_008 = RECORD-ORT01_008.
      ERRORITAB-ORT02_009 = RECORD-ORT02_009.
      ERRORITAB-LAND1_010 = RECORD-LAND1_010.
      ERRORITAB-REGIO_011 = RECORD-REGIO_011.
      ERRORITAB-SPRAS_012 = RECORD-SPRAS_012.
      ERRORITAB-TELF1_013 = RECORD-TELF1_013.
      ERRORITAB-TELF2_014 = RECORD-TELF2_014.
      ERRORITAB-BANKS_01_015 = RECORD-BANKS_01_015.
      ERRORITAB-BANKL_01_016 = RECORD-BANKL_01_016.
      ERRORITAB-BANKN_01_017 = RECORD-BANKN_01_017.
      ERRORITAB-ERRORMSG = ERR.
      SERIAL = SERIAL + 1.
      APPEND ERRORITAB.
      MODIFY RECORD TRANSPORTING KTOKK_002.
      DELETE RECORD WHERE KTOKK_002 = '0001'.
    ELSE.
      SUCCESSCNT = SUCCESSCNT + 1.
    ENDIF.
ENDLOOP.
display output********************************************************
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records successfully uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: SUCCESSCNT.
Displaying the success table******************************************
IF SUCCESSCNT <> 0.
    SKIP.
    FORMAT COLOR 4 INTENSIFIED OFF.
    WRITE:/ 'Successful Records'.
    FORMAT COLOR 7 INTENSIFIED ON.
    WRITE:/(261) SY-ULINE,
          / SY-VLINE,
            'S.NO',                               007 SY-VLINE,
            'VENDOR ACC.NUM',                     023 SY-VLINE,
            'VENDOR ACC GROUP',                   041 SY-VLINE,
            'TITLE',                              048 SY-VLINE,
            'VENDOR NAME',                        064 SY-VLINE,
            'SORT FIELD',                         076 SY-VLINE,
            'HOUSE NO.& STREET',                  101 SY-VLINE,
            'PO.BOX NO',                          116 SY-VLINE,
            'CITY',                               129 SY-VLINE,
            'DISTRICT',                           141 SY-VLINE,
            'COUNTRY KEY',                        156 SY-VLINE,
            'REGION',                             166 SY-VLINE,
            'LANGUAGE KEY',                       180 SY-VLINE,
            'TELEPHONE NO 1',                     196 SY-VLINE,
            'TELEPHONE NO 2',                     213 SY-VLINE,
            'BANK COUNTRY KEY',                   231 SY-VLINE,
            'BANK KEY',                           241 SY-VLINE,
            'BANK ACC.NO',                        261 SY-VLINE,
            /1(261) SY-ULINE.
    FORMAT COLOR 4 INTENSIFIED ON.
    SERIAL = 1.
   SORT RECORD BY LIFNR_001.
    LOOP AT RECORD.
      WRITE:/ SY-VLINE,
      SERIAL LEFT-JUSTIFIED,          007 SY-VLINE,
      RECORD-LIFNR_001(016),          023 SY-VLINE,
      RECORD-KTOKK_002(004),          041 SY-VLINE,
      RECORD-ANRED_003(015),          048 SY-VLINE,
      RECORD-NAME1_004(035),          064 SY-VLINE,
      RECORD-SORTL_005(010),          076 SY-VLINE,
      RECORD-STRAS_006(035),          101 SY-VLINE,
      RECORD-PFACH_007(010),          116 SY-VLINE,
      RECORD-ORT01_008(035),          129 SY-VLINE,
      RECORD-ORT02_009(035),          141 SY-VLINE,
      RECORD-LAND1_010(003),          156 SY-VLINE,
      RECORD-REGIO_011(003),          166 SY-VLINE,
      RECORD-SPRAS_012(002),          180 SY-VLINE,
      RECORD-TELF1_013(016),          196 SY-VLINE,
      RECORD-TELF2_014(016),          213 SY-VLINE,
      RECORD-BANKS_01_015(003),       231 SY-VLINE,
      RECORD-BANKL_01_016(015),       241 SY-VLINE,
      RECORD-BANKN_01_017(018),       261 SY-VLINE.
      WRITE:/(261) SY-ULINE.
      SERIAL = SERIAL + 1.
    ENDLOOP.
    WRITE:/1(261) SY-ULINE.
ENDIF.
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records not uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: FAILCOUNT.
*Displaying the error table
IF FAILCOUNT <> 0.
    SKIP.
    FORMAT COLOR 4 INTENSIFIED OFF.
    WRITE:/(320) SY-ULINE,
            'Error Records'.
    FORMAT COLOR 7 INTENSIFIED ON.
    WRITE:/ SY-ULINE, SY-VLINE,
            'S.NO',                               007 SY-VLINE,
            'VENDOR ACC.NUM',                     023 SY-VLINE,
            'VENDOR ACC GROUP',                   041 SY-VLINE,
            'TITLE',                              048 SY-VLINE,
            'VENDOR NAME',                        064 SY-VLINE,
            'SORT FIELD',                         076 SY-VLINE,
            'HOUSE NO.& STREET',                  101 SY-VLINE,
            'PO.BOX NO',                          116 SY-VLINE,
            'CITY',                               129 SY-VLINE,
            'DISTRICT',                           141 SY-VLINE,
            'COUNTRY KEY',                        156 SY-VLINE,
            'REGION',                             166 SY-VLINE,
            'LANGUAGE KEY',                       180 SY-VLINE,
            'TELEPHONE NO 1',                     196 SY-VLINE,
            'TELEPHONE NO 2',                     213 SY-VLINE,
            'BANK COUNTRY KEY',                   231 SY-VLINE,
            'BANK KEY',                           241 SY-VLINE,
            'BANK ACC.NO',                        261 SY-VLINE,
            'ERROR MESSAGE',                      320 SY-VLINE.
    WRITE:/(320) SY-ULINE.
    FORMAT COLOR 4 INTENSIFIED ON.
   SORT ERRORITAB BY LIFNR_001.
    LOOP AT ERRORITAB.
      WRITE:/ SY-VLINE,
            ERRORITAB-SERIAL LEFT-JUSTIFIED,          007 SY-VLINE,
            ERRORITAB-LIFNR_001 ,       023 SY-VLINE,
            ERRORITAB-KTOKK_002,       041 SY-VLINE,
            ERRORITAB-ANRED_003,       048 SY-VLINE,
            ERRORITAB-NAME1_004,       064 SY-VLINE,
            ERRORITAB-SORTL_005,       076 SY-VLINE,
            ERRORITAB-STRAS_006,       101 SY-VLINE,
            ERRORITAB-PFACH_007,       116 SY-VLINE,
            ERRORITAB-ORT01_008,       129 SY-VLINE,
            ERRORITAB-ORT02_009,       141 SY-VLINE,
            ERRORITAB-LAND1_010,       156 SY-VLINE,
            ERRORITAB-REGIO_011,       166 SY-VLINE,
            ERRORITAB-SPRAS_012,       180 SY-VLINE,
            ERRORITAB-TELF1_013,       196 SY-VLINE,
            ERRORITAB-TELF2_014,       213 SY-VLINE,
            ERRORITAB-BANKS_01_015,    231 SY-VLINE,
            ERRORITAB-BANKL_01_016,    241 SY-VLINE,
            ERRORITAB-BANKN_01_017,    261 SY-VLINE,
            ERRORITAB-ERRORMSG,        320 SY-VLINE.
      WRITE:/(320) SY-ULINE.
    ENDLOOP.
    WRITE:/ SY-ULINE.
ENDIF.
hope this ll help you..
regards,
prema.A

How to handle clips properly (recording and cutting)

Similar Messages

Maybe you are looking for