How to handle multiple part appraisers in OSA

how do I configure the system for two part-appraisers and one final appraiser?
1. do I need to configure two standard columns PAPP?
2. how do I autorize partappr1 to access PAPP column 1 and partappr2 to access PAPP column2?
3. how to specify who the part appraisers are? ex. john doe is partappr1 and mary jones is partappr2.
4. do I need two process steps in the process flow (step1="partappr1 feedback completed", step2="partappr2 feedback completed" )
Thanks,
Tiberiu

Hi Tiberiu,
1. do I need to configure two standard columns PAPP?
- No, one column is enough. system will occupy separate columns for each of the part appraisers.
2. how do I autorize partappr1 to access PAPP column 1 and partappr2 to access PAPP column2?
- In column access tab you can select "Phase dependent access for owner" ,in the Default field
3. how to specify who the part appraisers are? ex. john doe is partappr1 and mary jones is partappr2.
- There part appraiser names are determined when the form is first created by the HR specialist or the appraiser.
4. do I need two process steps in the process flow (step1="partappr1 feedback completed", step2="partappr2 feedback completed" )
- When you select part appraiser column, in status flow In Process - Part Appraiser in process substatus is automatically selected. You don't need a separate status. Please make sure that you hit "Set status" field while maintaining Part Appraiser in process substatus and determine the target status/substatus -probably In Process (by final appraiser)- when the last part appraiser is finished with the document.
Regards,
Dilek

Similar Messages

How to handle multiple tables data in Entity Beans?

How to handle multiple tables data in Entity Beans?
i mean, my bean (non trivial) is responsible for frequent
insertion in one table and some deletion on another table.
Can anyone of you...please..?

Is your data model right? If you are adding in one and deleting in another it sounds to me more like a process that an entity, in which case you may revisit your data model and simplify it, add in a session bean with the process method to co-ordinate between the two.
However, if you want to map multiple different tables within a single entity bean it is possible and just part of the mapping. How you actualyl specify it depends on which implementation you are working with.
Cheers,
Peter.

How to handle multiple connection or user with l2cap

hi friends,
I need your help please a.s.a.p
how to handle multiple connection with l2cap protocol in j2me
sorry,
I'm a new programmer in j2me
thanks all...

Please stick with the original thread http://forum.java.sun.com/thread.jspa?threadID=5200413&tstart=0
Cross-posting is very rude, and JSch has nothing to do with JSSE, directly. It is an SSH2 API. It does (AFAIK) use some parts of JSSE, but those parts are definately not your problem.
You already have answers in the other thread.

How to handle multiple datasources in a web application?

I have a J2EE Web application with Servlets and Java ServerPages. Beside this I have a in-house developed API for certain services built using Hibernate and Spring with POJO's and some EJB.
There are 8 databases which will be used by the web application. I have heard that multiple datasources with Spring is hard to design around. Considering that I have no choice not to use Spring or Hibernate as the API's are using it.
Anyone have a good design spesification for how to handle multiple datasources. The datasource(database) will be chosen by the user in the web application.

Let me get this straight. You have a web application that uses spring framework and hibernate to access the database. You want the user to be able to select the database that he wants to access using spring and hibernate.
Hopefully you are using the Spring Framework Hibernate DAO. I know you can have more that one spring application context. You can then trying to load a seperate spring application context for each database. Each application context would have it's own configuration files with the connection parameters for each datasource. You could still use JNDi entries in the web.xml for each datasource.
Then you would need a service locater so that when a user selected a datasource he would get the application context for that datasource which he would use for the rest of his session.
I think it is doable. It means a long load time. And you'll need to keep the application contexts as small as possible to conserve resources.

How to handle multiple actions in the webservice ?

Hi Guys,
I have multiple operations in the webservcie and under soap action in the receiver soap adapter, i dont know how to handle multiple soap operations.
can anybody guide me, how to acheive this ?
Thanks,
srini

Hi Srini !
This weblog shows the general design of a scenario with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
This link:
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
show how to insert a predefined BPM pattern. You could use one of the BpmPatternSerialize.... patterns to see how you BPM should look like...
Basically it should be:
1) Receive Step (async/sync, as you need) to trigger the BPM
2) Send step (sync) for first webservice
3) Send step (sync) for second webservice
N) Send step (sync) for N webservice
N+1) if the whole communication is sync, here you need to use a send step to return back the answer to sender.
Regards,
Matias.

How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

Hi All,
I am using checkbox as an ItemRenderer in spark list.
I have a query.
how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
how to retrieve the selected item label?
Thank you in advance.

Hi there, I'll tweak your code a little bit to something like this:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="vertical">
    <mx:Script>
        <![CDATA[
             import mx.events.ListEvent;
             import mx.controls.CheckBox;
           [Bindable]
           private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
            private function onChange(e:ListEvent):void
               if(CheckBox(e.itemRenderer).selected){
                         mySelectedIndexes.addItem(e.rowIndex);
               }else{
                              mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));
               chkList.selectedIndices=mySelectedIndexes.toArray();
        ]]>
    </mx:Script>
<mx:ArrayCollection id="collection">
        <mx:Object label="Test A"/>
        <mx:Object label="Test B"/>
        <mx:Object label="Test C"/>
        <mx:Object label="Test D"/>
        <mx:Object label="Test E"/>
        <mx:Object label="Test F"/>
        <mx:Object label="Test G"/>
    </mx:ArrayCollection>
<mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox" itemClick="onChange(event);" allowMultipleSelection="true"/>
</mx:Application>

How to handle multiple request in the servlet

how to handle multiple request in the servlet...
Example:
java forum...
i'm login in the java forum at this time 1000 members make login in this....how happended in servlet?
if we use thread how to implement in servlet ?

Serlets are already threaded. The application container instantiates the servlet, then uses this instance in a new thread for every use.
This is the reason that you should use (almost) no instance variables in a Servlet, but rather that (almost) everything should be local to the method.

How to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configrations

how to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configurations
before ver 8.3 and after version 8.3 ...8.4.. 9 versions..

Hi,
To my understanding you should be able to attach the same cryptomap to the other "outside" interface or perhaps alternatively create a new crypto map that you attach only to your new "outside" interface.
Also I think you will probably need to route the remote peer ip of the VPN connection towards the gateway IP address of that new "outside" and also the remote network found behind the VPN connection.
If you attempt to use VPN Client connection instead of L2L VPN connection with the new "outside" interface then you will run into routing problems as naturally you can have 2 default routes active at the sametime (default route would be required on the new "outside" interface if VPN Client was used since you DONT KNOW where the VPN Clients are connecting to your ASA)
Hope this helps
- Jouni

How to handle multiple save exceptions (Bulk Collect)

Hi
How to handle Multiple Save exceptions? Is it possible to rollback to first deletion(of child table) took place in the procedure.
There are 3 tables
txn_header_interface(Grand Parent)
orders(parent)
order_items (Child)
One transaction can have one or multiple orders in it.
and one orders can have one or multiple order_items in it.
We need to delete the data from child table first then its parent and then from the grand parent table.if some error occurs anywhere I need to rollback to child record deletion. Since there is flag in child table which tells us when to delete data from database.
Is it possible to give name to Save exceptions?
e.g.
FORALL i IN ABC.FIRST..ABC.LAST SAVE EXCEPTIONS A
FORALL i IN abc.FIRST..ABC.LAST SAVE EXCEPTIONS B
if some error occurs then
ROLLBACK A; OR ROLLBACK B;
Please find the procedure attached
How to handle the errors with Save exception and rollback upto child table deletion.
CREATE OR REPLACE
PROCEDURE DELETE_CONFIRMED_DATA IS
TYPE TXN_HDR_INFC_ID IS TABLE OF TXN_HEADER_INTERFACE.ID%TYPE;
TXN_HDR_INFC_ID_ARRAY TXN_HDR_INFC_ID;
ERROR_COUNT NUMBER;
BULK_ERRORS EXCEPTION;
PRAGMA exception_init(bulk_errors, -24381);
BEGIN
SELECT THI.ID BULK COLLECT
INTO TXN_HDR_INFC_ID_ARRAY
FROM TXN_HEADER_INTERFACE THI,ORDERS OS,ORDER_ITEMS OI
WHERE THI.ID = OS.TXN_HDR_INFC_ID
AND OS.ID = OI.ORDERS_ID
AND OI.POSTING_ITEM_ID = VPI.ID
OI.DW_STATUS_FLAG =4 --data is moved to Datawarehouse
MINUS
(SELECT THI.ID FROM TXN_HEADER_INTERFACE THI,ORDERS OS,ORDER_ITEMS OI
WHERE THI.ID = OS.TXN_HDR_INFC_ID
AND OS.ID = OI.ORDERS_ID
OI.DW_STATUS_FLAG !=4);
IF SQL%NOTFOUND
THEN
EXIT;
END IF;
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM ORDER_ITEMS OI
WHERE OI.ID IN (SELECT OI.ID FROM ORDER_ITEMS OI,ORDERS
OS,TXN_HEADER_INTERFACE THI
WHERE OS.ID = OI.ORDERS_ID
AND OS.TXN_HDR_INFC_ID = THI.ID
AND THI.ID = TXN_HDR_INFC_ID_ARRAY(i));
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM ORDERS OS
WHERE OS.ID IN (SELECT OS.ID FROM ORDERS OS,TXN_HEADER_INTERFACE THI
WHERE OS.TXN_HDR_INFC_ID = THI.ID
AND THI.ID = TXN_HDR_INFC_ID_ARRAY(i));
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM TXN_HEADER_INTERFACE THI
WHERE THI.ID = TXN_HDR_INFC_ID_ARRAY(i);
COMMIT;
DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE, 'DD-MON-YY HH:MIPM')||':
DELETE_CONFIRMED_DATA: INFO:DELETION SUCCESSFUL');
EXCEPTION
WHEN OTHERS THEN
ERROR_COUNT := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE, 'DD-MON-YY HH:MIPM')||':
DELETE_CONFIRMED_DATA: ERROR:Number of errors is ' ||ERROR_COUNT);
FOR indx IN 1..ERROR_COUNT LOOP
DBMS_OUTPUT.PUT_LINE('Error ' || indx || 'occurred during
'||'iteration'||SQL%BULK_EXCEPTIONS(indx).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error is '
||SQLERRM(-SQL%BULK_EXCEPTIONS(indx).ERROR_CODE));
END LOOP;
END DELETE_CONFIRMED_DATA;
Any suggestion would be of great help.
Thanks in advance
Anu

If you have one or two places in your code that need multiple exceptions, just do it with multiple catch statements. Unless you are trying to write the most compact Programming 101 homework program, inventing tricks to remove two lines of code is not good use of your time.
If you have multiple catches all over your code it could be a code smell. You may have too much stuff happening inside one try statement. It becomes hard to know what method call throws one of those exceptions, and you end up handling an exception from some else piece of code than what you intended. E.g. you mention NumberFormatException -- only process one user input inside that try/catch so it is easy to see what error message is given if that particular input is gunk. The next step of processing goes inside its own try/catch.
In my case, the ArrayIndexOutOfBoundsException and
NumberFormatException should be handled by the same way.Why?
I don't think I have ever seen an ArrayIndexOutOfBoundsException that didn't indicate a bug in the code. Instead of an AIOOBE perhaps there should be an if statement somewhere that prevents it, or the algorithm logic should prevent it automatically.

How to handle multiple exception types in JSF 2?

I'm trying to handle multiple exception types in JSF2, including a default error page for any unexpected exception types. The problems I'm having are:
1) ViewExpiredException is handled only when no generic exception handler is specified
2) "Regular" exceptions like NullPointerException are never handled
My managed bean:
@Named
@SessionScoped
public class MyController implements Serializable {
/* A method that does nothing */
public void doNothing() {
    //do nothing
/* Generate a null pointer exception on purpose */
public void generateNpe() throws NullPointerException {
    Object x = null;
    x.toString();
My test page to generate the exception:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core">
<h:head>
    <title>Test page</title>
</h:head>
<h:body>
    <h:form>
        <h:commandButton id="button1" value="do nothing" action="#{myController.doNothing}" />
        <h:commandButton id="button2" value="generate NPE" action="#{myController.generateNpe}" />
    </h:form>
</h:body>
</html>
My web.xml:

<error-page>
    <exception-type>java.lang.NullPointerException</exception-type>
    <location>/error/error003.jsf</location>
</error-page>

<error-page>
    <exception-type>javax.faces.application.ViewExpiredException</exception-type>
    <location>/error/error002.jsf</location>
</error-page>

<error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/error/error001.jsf</location>
</error-page>My questions are as follows:
1) How can we handle "regular" java exceptions like NPE?
2) How can we define a catch-all for unexpected exception types, while still respecting specific exception handlers for VEE, etc?
Thanks,
Benjamin

Is your data model right? If you are adding in one and deleting in another it sounds to me more like a process that an entity, in which case you may revisit your data model and simplify it, add in a session bean with the process method to co-ordinate between the two.
However, if you want to map multiple different tables within a single entity bean it is possible and just part of the mapping. How you actualyl specify it depends on which implementation you are working with.
Cheers,
Peter.

How to handle multiple records in BPMN process

Hi All,
We are using Oracle BPM 11g.In my requirement,I am using the database adapter to get the data from table and I need to validate the each record and update the status of that record from the BPM Process.But I dont know how to handle if multiple records come at a time.Can anybody please helpout from this problem.
Thanks in advanced.
Narasimha Rao.

Can you have a look at this post: http://redstack.wordpress.com/2010/09/30/iteratingtraversing-arrays-in-bpm/
It's solving a different problem, but the key is that it's using a multi-instance subprocess to iterate over an array of "things" that need to be acted in. In your case it's the set of results from the db query rather than the set of tests in the example. But the principle is the same. You'd take collection of rows from the DB and process them in a multi-instance subprocess. The text that begins with the following would be good place to start:
"Now let’s implement the body of our process. We will use the Subprocess object to handle the traversal of the array of tests. Drag a Subprocess from the component palette on the right into the process and drop it on the line between the Start and End nodes."
In the loop characteristics you'd define whether you want to execute serially or in parallel.

How to handle multiple clients with DatagramSocket

I am trying to handle multiple clients with 1 datagramSocket bind to one port (basically I have only one port to use, and I can not use TCP or any other ports). At the server side I have two threads one for receiving packets and buffering them, another for processing the packets in the buffer and sending replies.
I can have multiple clients sending datagramPackets to me and I will have to process the packets and send them to DIFFERENT clients. Ex. Client 1 sends datagramPacket to Server which sends the processed packet to Client 2. Also Client 2 sends a datagramPacket to Server which again processes the packet and sends it to Client1. May have Client 3 and 4 doing the same thing at the same time... and so on...
My root class is creating the datagramSocket(somePort) and two threads (receiver and sender). How can I use the socket that I created in these two threads??
I have done the following and I am getting "java.net.bindexception". When I am sending stuff from Client1 to Client2 everything is fine but when I start sending something from Client2 to Client 1, I get the bindexception... Client 1 is using port 3000, Client 2 is using port 4000.
I really don't have a lot of experience in socket programming so I am not sure if there is a much simpler way to do this. I appreciate all the tips and help that I can get...
Thanks...
class UDP_serv
     static DatagramSocket udpSocket;
     final static int SERVER_PORT     = 2000;
     public static void main(String[] args) throws SocketException
          udpSocket= new DatagramSocket(SERVER_PORT);
          new DataReceiver().start ();
          new DataSender().start ();
     static class DataReceiver extends Thread
          DataReceiver()
               Thread.currentThread().setName("DataReceiver");
          public void run()
               while (true)
                    byte pckt[] = new byte [MaxMsgSize];
                    DatagramPacket dp = new DatagramPacket (pckt, pckt.length);
                    try
                         udpSocket.receive (dp);
                         //PUSH TO RECEIVE BUFFER
                    catch(Exception e)
                         e.printStackTrace();
     static class DataSender extends Thread
          DataSender()
               Thread.currentThread().setName("DataSender");
          public void run()
               while (true)
                    processDataMsg();
      static void processDataMsg()
         DatagramPacket op;
         InetAddress DA = null;
         int DP = 0;
         byte [] outPacket = null;
         // POP FROM RECEIVE BUFFER
         // SOME PROCESSING HERE
         // Set Destination Address (DA)
         // Set Destination Port (DP)
         // DA and DP are the forwarding IP and Port addresses
         // not the addresses original packet was sent from.
         try
          op = new DatagramPacket (outPacket, outPacket.length,DA, DP);
          udpSocket.send(op);
         catch (IOException e)
          e.printStackTrace();
}Also for development and testing purposes, I am running the two clients and the server on the same machine (windows xp-32b) so all of the Destination IP Addresses are 127.0.0.1. and as I said Ports that I am using are 2000, 3000, 4000 (Server, Client1, Client2).

Hmm I have minimized the code and it seems to be working now.
I think I have an error in the header portion of the data I am sending, where I am storing the source IP/Port and destination IP/Port. I think the server in the middle is messing these values up while sending them to the destination Client. Because the destination client actually receives the stuff and sends the reply back to the server, but the reply packet's headers has 0/0 as the dest IP / Port...
Server is giving me java.net.BindException: Cannot assign requested address error when it tries to forward the reply it received from the client2 as the address it is trying to send is 0!
I guess it doesnt just give this error when you try to open two sockets to the same port...
Paul, Thanks for the direction on how to proceed... took me a while get the minimized code but at least figured out the problem. Well still have to make sure that is THE problem though :)
As far as the statics goes how can I change those to non static ones? Where do I make an instance of the top level class that creates the threads? and how do I pass the DatagramSocket to the threads/ if I dont need to pass how do I call or use the datagramSocket I created in the top level class? I mean do I still kinda have it like a global variable on the top?? A very simple example would be much appreciated...
I think these might be really basic questions but I am having a rough time with the hierarchy in java...

How to handle multiple / dual MRP in RMS , RPM ?

hi all ,
can some one share how to handle dual MRPs in RPM & RMS.
regards,
deepak

Hi Deepak,
Do you mean Multiple Max Retail Price (MMRP)?
This is discussed e.g. in the India Localization Version of RMS12.0.5, http://docs.oracle.com/cd/B31318_01/rms/pdf/India/1205/rms-1205in-rn.pdf at the start.
If not having this in mind, please elaborate.
Bye for now,
Erik

How to handle multiple attachments in XI mail sender adapter?

Hi,
is it possible to handle multiple attachments in a mail receiving in XI?
Our customer wants to send us mails with multiple attachments and we have to convert each attachment to an idoc.
But as I know XI (receiving mails) can handle only a single attachment in a mail. Is it true?
Any ideas?
Thanks a lot!
Regards
Wolfgang

Hi Wolfgang,
Well, although I have never tried a scenario of picking more than two attachments from one mail, I wonder if its possible in the first place!
Here are the reasons why I think it is possible:-
It is not mentioned anywhere in the SAP Notes for mail adapter that it is not possible.
*It is not mentioned anywhere in the SAP help documentation that it is not possible
*Also, I think if the receiver mail adapter can create more than one attachment, the sender should be able to pick more than one!:)
Have you tried defining a PayloadSwapBean module to pick up more than one attachment?
Just try experimenting with this particular part of the module code:-
Content-Disposition: attachment;filename="MailAttachment-1.xml"
Content-Description: MailAttachment-1
I think even the following weblog might be able to help you to a certain extent:-
"Receiving E-Mail and processing it with ABAP - Version 610 and Higher" - /people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
Regards,
Sushumna
Regards,
Sushumna

How to handle multiple line items in lsmw

hi all,
how can i handle multiple line items in lsmw either by using direct input method or BDC recording.
first preference is Bdc recording in lsmw . can u tell me the steps in detail.
thanks,
harini.c

Hi Harini,
Check this link.
BDC - Header with multiple line items.
Regards,
Arun

How to handle multiple part appraisers in OSA

Similar Messages

Maybe you are looking for