How to handle rpc/encoded style messages using BizTalk?

I am integrating with a lot of services and one of our customers has a service with rpc/encoded style
I could consume and generate schema from their wsdl file via BizTalk consume WCF wizard.
Once I am trying to call the service with request message that generated from the schema, it is giving an error that can not desterilize the first element of the message.
No Deserializer found to deserialize a 'FieldName' using encoding style 'null'
I compared the stub xml request message from SaopUI and I noticed that the xml expecting the data type with the element like this .
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<sozlesmeNo xsi:type="xsd:string">?</sozlesmeNo>
<bankaKodu xsi:type="xsd:string">?</bankaKodu>
<anahtar xsi:type="xsd:string">?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
On the other hand, I got the request of the message from Fiddler using the BizTalk , and the generate xml of the BizTalk schema without the data type.
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama>
<sozlesmeNo>?</sozlesmeNo>
<bankaKodu>?</bankaKodu>
<anahtar>?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
In SoapUi, if I remove a datatype from the message, I will get same error from the BizTalk request.
I read some articles that rpc/encoded style are not supported but I am not sure and these articles are not clear.
I also read that it was supported with Soap adapter but now it is deprecated.
So, Is there any one has an experience in rpc/encoded style messages and how to handle these message in BizTalk or is there any work around to handle these messages?
Your inputs really appreciate it.
Thanks in advance,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi,
Please refer to the document which might help you:
#RPC/Encoded Style
http://www.c-sharpcorner.com/UploadFile/martinkropp/DesigningInteroperableWebService11232005044847AM/DesigningInteroperableWebService.aspx

Similar Messages

RPC/encoded style webservice

Hi Experts,
How to expose RPC/encoded style webservices from XI? As far as I know, we can expose Document literal style webservice from PI7.0.
Could you please tell me, for this question where I can get the exact answer?
Regards
Sara

Hi,
please go through below links
Using XML-RPC in NetWeaver
/people/sap.user72/blog/2004/09/23/using-xml-rpc-in-netweaver
External Data Loads for CRM 4.0 using XIF adapter
/people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter
XML-RPC protocol and XIF Adapter
XML-RPC protocol and XIF Adapter
Thanks
Swarup

How to handle system errors in XI using BPM? please help!

Hi Experts,
I have a requirement where I have to handle system errors. For example when I am making RFC call using RFC adapter if the remote destination is down then I have create a understandable error message and store it in another SAP table.
How to handle it? I am using BPM. I can see that there is "Exceptions" in the send step. How to use this?
Thanks
Gopal

Hi Gopalkrishna,
In this case whenever you get Mapping Exception , you can raise an Exception with the help of BPM and you can send the status to the RFC. But with the help of BPM.
For a Simple case refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through <a href="/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping Exceptions in SAP XI Mapping</a> and see if it helps you solve the problem.
Also go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
Please do let know if it helped.
Regards,
Abhy

RPC/encoded style

Hi Experts,
I have read it in some forum thread stating that, we can't use RPC/encoded style in XI. Even if we get RPC style wsdl files from other platforms we have to first convert it into Document style to access XI.
Question:
When we create wsdl thro' XI also, it automatically creates with document style. Do we have any option to create a wsdl file with RPC style? If it is not possible with XI then, is there any other way to create RPC style wsdl file for the XI service.
Regards
Sara

Yes its possible,
Please check following :-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c018da90-0201-0010-ed85-d714ff7b7019
RPC WSDL in XI
Vishal
Reward points for useful Help

How to handle the system error messages?

Hi...
I was doing File to RFC scenario with BPM. If i give the correct values for the Bapi Input it is working . If i give the some wrong input to the BAPI, it is not executing and the scenario is stopping. If i click on PE , it is going to the Inbound Queue.
If this type of issue occurs i need to capture the system error and store it in a database. Could you pelase help in this issue.
Thanks,
Leela
Edited by: leelaratnam morampudi on Nov 21, 2008 2:24 PM

Hi Leela,
You need to handle this in BPM. Check the thread describing how to catch exceptions in BPM.
How to handle system errors in XI using BPM? please help!
Thanks!

How to handle the bad record while using bulk collect with limit.

Hi
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
Example:
I am inserting into table with LIMIT of 1000 records and i've got error at 588th record.
i want to commit the transaction with 588 inserted record in table and log the error into
error logging table then i've to continue with transaction with 560th record.
Can anyone suggest me in this case.
Regards,
yuva

>
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
>
Use the SAVE EXCEPTIONS clause of the FORALL if you are doing bulk inserts.
See SAVE EXCEPTIONS in the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/tuning.htm
And then see Example 12-9 Bulk Operation that continues despite exceptions
>
Example 12-9 Bulk Operation that Continues Despite Exceptions
-- Temporary table for this example:
CREATE TABLE emp_temp AS SELECT * FROM employees;
DECLARE
TYPE empid_tab IS TABLE OF employees.employee_id%TYPE;
emp_sr empid_tab;
-- Exception handler for ORA-24381:
errors NUMBER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(dml_errors, -24381);
BEGIN
SELECT employee_id
BULK COLLECT INTO emp_sr FROM emp_temp
WHERE hire_date < '30-DEC-94';
-- Add '_SR' to job_id of most senior employees:
FORALL i IN emp_sr.FIRST..emp_sr.LAST SAVE EXCEPTIONS
UPDATE emp_temp SET job_id = job_id || '_SR'
WHERE emp_sr(i) = emp_temp.employee_id;
-- If errors occurred during FORALL SAVE EXCEPTIONS,
-- a single exception is raised when the statement completes.
EXCEPTION
-- Figure out what failed and why
WHEN dml_errors THEN
errors := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE
('Number of statements that failed: ' || errors);
FOR i IN 1..errors LOOP
DBMS_OUTPUT.PUT_LINE('Error #' || i || ' occurred during '||
'iteration #' || SQL%BULK_EXCEPTIONS(i).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error message is ' ||
SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE));
END LOOP;
END;
DROP TABLE emp_temp;

How to handle "Memory Low" warning message?

Recently users have been getting a warning message when they log on: "Memory low. Leave the transaction before taking a break." When we look at SM50 the user has a status of "On Hold" and the reason column says "PRIV". We are on ECC 6.0 (since January 2010) and V7R1 (March 2011).
Usually the message is received as soon as the user logs on so it is not like it is related to a particular program. We can go weeks without any reported instance of the message so it is not a regular occurrence. Fortunately there does not seem to be any other symptom other than getting the message.
I have seen a post on an SAP forum that said to adjust the instance profile with these parameters:
rdisp/max_priv_time
rdisp/wppriv_max_no
I do not have any entries for this now and am not sure what the values should be.
Does anyone have any suggestions on how to handle this on an AS/400? Thanks in advance.
Alan

Hi Alan,
what 1024 ???
then we definetely do NOT need as4/MAXSHR64 !
I would normally at least go for em/initial_size_MB = 8000 - as you are having issues right now ...
Or is this a small DEV-system ?
then 4000 might be sufficient ...
(the 4096 is just crap - make it simple and use e.g. 4000 then ...)
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

Can SAP handle RPC/encoded WSDLs

I am not sure whether this is the right forum for this question, but i'll give it a try:
I have a WSDL file (web service decription) from a 3rd party tool, which is RPC/encoded, and I tried to generated an ABAP proxy class (SAP Basis 7.01). During the generation I get a couple of different errors, and the one that bothers me most is
"incorrect value for attribute use: "encoded"".
When I replace all occurrences of "use="encoded"" with "use="literal"", then the proxy generation will work, but in this case, the web service call will not work anymore (probably because the encoded response from the webservice cannot be read by the proxy class).
What can I do?
Any hints are welcome.

Hi,
It seems only RPC with literal will be supported in future.
Quote from wiki Please see this:
"Some of these combinations are rarely used in practice, such as document/encoded. In general, the literal use is gaining importance, and as far as RPC/encoded is concerned, the Web Services Interoperability Organization (WS-I) in its Basic Profile Version 1.0a of August 2003 ruled out the use of SOAP encoding with web services. Document/literal and RPC/literal will be the only allowed style/use combinations in the future."
Detail wiki is available here: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c018da90-0201-0010-ed85-d714ff7b7019
Regards,
Gourav
Edited by: Gourav Khare on Oct 13, 2009 12:28 AM

How to handle duplicate price creation while using RV_CONDITION_COPY

Hi,
I using FM RV_CONDITION_COPY in my BAPI to create the price but if the same record is being passed again either with same validation date or different validation dates then system pops up a window with message "The validity period of the condition created overlaps with conditions with shorter validity periods. These conditions will be deleted when you save." and other detail. This screen is same as when we try to create price using VK11.
Does anybody know how to handle this issue.
Thanks and Regards,
Seema

this may helps you.
Look at the below thread ....
Check if the below code can help you:
U can try like this
CONSTANTS:
CON_A(1) TYPE C VALUE 'A',
CON_B(1) TYPE C VALUE 'B',
CON_C TYPE C VALUE 'C',
CON_D TYPE C VALUE 'D',
CON_E TYPE C VALUE 'E',
CON_F TYPE C VALUE 'F',
CON_G TYPE C VALUE 'G',
CON_K TYPE C VALUE 'K',
CON_T TYPE C VALUE 'T',
CON_S(1) TYPE C VALUE 'S',
CON_V LIKE T681A-KAPPL VALUE 'V',
CON_X TYPE C VALUE 'x',
CON_XX TYPE C VALUE 'X',
CON_T074 LIKE T681-KOTABNR VALUE '074',
CON_PREF LIKE T685A-KSCHL VALUE 'PREF',
CON_ULTIMO LIKE RV13A-DATAB VALUE '99991231',
CON_DATA_LOG_NAME(8) TYPE C VALUE 'PREF',
CON_ERROR_LOG_NAME(8) TYPE C VALUE 'ERROR',
CON_CUSTOM_LOG_NAME(8) TYPE C VALUE 'P_CUSTOM'.
Verkaufsmengeneinheit
PERFORM f3_vkme_ermitteln.
Hauswährung
IF t001w-werks NE cstmat-werks.
PERFORM f3_waehrung_ermitteln USING cstmat-werks.
ENDIF.
pro Zollgebiet Konditionssatz anlegen
LOOP AT t_matwerte.
CHECK t_matwerte-noupd_cond IS INITIAL.
CLEAR: komk,
komp,
komg,
w_komv.
REFRESH w_komv.
Schlüssel füllen
komg-werks = w_marc-werks.
komg-matnr = w_marc-matnr.
komg-gzolx = t_matwerte-gzolx.
komg-land1 = t001w-land1. "101298
Preisinfo füllen
w_komv-kappl = 'V '.
w_komv-kschl = con_pref.
IF t_matwerte-kp = kp_max.
w_komv-kpein = 1.
MOVE kp_max TO w_komv-kbetr.
ELSE.
w_komv-kpein = pm_peinh.
COMPUTE w_komv-kbetr = t_matwerte-kp * pm_peinh / hlp_ameng.
ENDIF.
IF w_komv-kbetr = 0.
COMPUTE w_komv-kbetr = 1 / 100 * -1.
ENDIF.
w_komv-waers = t001-waers.
w_komv-kmein = hlp_ame.
APPEND w_komv.
CHECK f3_kz_update_cond IS INITIAL OR
NOT pm_simu IS INITIAL.
IF NOT pm_mdmps IS INITIAL.
MOVE komg-werks TO bg_kond-werks.
MOVE komg-matnr TO bg_kond-matnr.
MOVE komg-gzolx TO bg_kond-gzolx.
MOVE w_komv-kpein TO bg_kond-kpein.
MOVE w_komv-kbetr TO bg_kond-kbetr.
MOVE w_komv-kmein TO bg_kond-kmein.
MOVE w_komv-waers TO bg_kond-waers.
*{ REPLACE D20K904946 1
APPEND bg_kond.
Siemens: Fehlerkorektur SAP-Standard
READ TABLE BG_KOND TRANSPORTING NO FIELDS
WITH KEY WERKS = BG_KOND-WERKS
MATNR = BG_KOND-MATNR
GZOLX = BG_KOND-GZOLX
BINARY SEARCH.
INSERT BG_KOND INDEX SY-TABIX.
*} REPLACE
ENDIF.
CHECK f3_kz_update_cond IS INITIAL.
CALL FUNCTION 'RV_CONDITION_COPY'
EXPORTING
application = con_v
condition_table = con_t074 "Konditionstabelle
condition_type = con_pref "Konditionsart
date_from = sy-datlo "Von jetzt an
date_to = con_ultimo "Bis Ultimo
enqueue = 'X' "Sperren ist besser
i_komk = komk
i_komp = komp
key_fields = komg "Schlüssel
maintain_mode = 'A' "Lieber A als B
no_authority_check = 'X' "X wie nix
keep_old_records = ' '
OVERLAP_CONFIRMED = 'X'
IMPORTING
e_komk = komk
e_komp = komp
new_record = i_new_record
TABLES
copy_records = w_komv
EXCEPTIONS
enqueue_on_record = 01
invalid_application = 02
invalid_condition_number = 03
invalid_condition_type = 04
no_authority_ekorg = 05
no_authority_kschl = 06
no_authority_vkorg = 07
no_selection = 08
table_not_valid = 09.
CASE sy-subrc.
WHEN 0.
WHEN OTHERS.
MESSAGE A???
ENDCASE.
CALL FUNCTION 'RV_CONDITION_SAVE'.
CALL FUNCTION 'RV_CONDITION_RESET'.
ENDLOOP.

How to create RPC encoded wsdl for the bpel project created in jdeveloper?

Hi,
I have to create a bpel project in jdeveloper with the wsdl of the project in rpc encoded format. By default when we create a bpel project in jdeveloper it creates a wsdl file of document literal format, but i need the wsdl to be rpc encoded format. Please let me know how can i achieve this.
Thanks.

Hi Nico,
Thanks for your reply.
You mentioned to specify type in place of element, from where do you get this type and what more changes we need to do for the entire project to compile well with out errors.
As suggested by you, I changed the element to type and tried to compile, it is giving the below error.
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part type.
In WSDL at "file:/D:/indu/jdevstudio10134/jdev/mywork/TimerApplication/SelectDB/bpel/SelectDB.wsdl", message part type "SelectDBProcessRequestType" is not defined in any of the schemas.
Please make sure the spelling of the type QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
Please let me know what are all the changes that need to be done to complie the project successfully.
Thanks and Regards.

How to handle the Exception in GP using executable callabel object.

Hi all,
I handled an exception in GP using Background callable Object. That is working fine.
(Ex: Exception_No_User_Found). The Problem is I am not able to handle the exceptions for normal callable object. I have done the same thing as i did in background callable object except implementing IGPBackgroundCallableObject Class. I have created an WebDynpro DC Project where in getDescription method i declared an Exception and in execute method of component controller I caught the exception if no user found.
Then i created an callable object for this simple DC project. but that is not working i could not catch the exception. when i execute the process it is asking the User ID if i give the wrong userId it is not refreshing back to the user id input form.
But if i test that simple callable object separately it is throwing an Exception when I give the wrong input..
but the same thing is working fine using background callable object.
I couldn't handle the exception for the simple callable object or executable callable object.
Please If anyone bring me the solution that would be appreciated.
Thanks in advance.
Regards,
Malar.

Hi Shikhil
Thanks for your reply
Please have a look below for exceptions which i am getting in GP and let me know how to handle these exceptions.
1) "Activity could not be read"
2) "Action has been stopped"
3) error while processing the item can not be displayed
if you give any idea/clue how to handle these exceptions then it would be great help to me
Thanks
Sunil

How to handle thousands of clients without using Overlapped I/O?

Is there's a way that allows me to handle thousands of clients without using Overlapped I/O? Based on what I know select() can only handle 64 sockets, and it is not a good idea to increase this limit (by overriding FD_SETSIZE).

On 2/25/2015 2:16 PM, Tom_912 wrote:
I don't have a problem in using Overlapped I/O, I just wanted to know if this is the only way to go.
Well, you could create thousands of threads, one per client, and use blocking sockets. Or you could use window-message based notifications - see WSAAsyncSelect. Or, you could poll with select(), a chunk of 64 at a time, with a short timeout. All of these
would work, though none would scale very well.
Igor Tandetnik

How can I transmit and receive messages using Vector CANTech CancardXL with LabVIEW?

I'm a new LabVIEW user and I need transmit and receive CAN messages using a CancardXL from Vector CANTech with LabVIEW.
Could somebody have any vi or suggestion?

I made a set a LabVIEW VIs to work with Vector/Softing CANCards starting from an example program I downloaded from Softing. These use the Call Library Node to interface with the cards .dll.
I can't give these out because they were developed for a customer. I would contact Vector and see if they have an example program for your card. Might be the same one I started with.
[caution, salesman hat going]
Of course if you need help developing the VIs, we'd more than happy to assist you.
[remove saleman hat]
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Create null message using BizTalk mapper XSLT

Hi,
I have a requirement to check if a message contains a certian value, and if so, throw away the message. Does anyone know how this could be done using BizTalk mapper/ XSLT? It's an ESB messaging only solution so don;t want to introduce orchestratons
/ c# code.
In short is field A = 'yes' the message will be thrown away / made null.
Thanks in advance.
GilesB

If you consider doing this in Receive-side with some pipeline component, I am afraid you can't eat the data at the receive pipeline. For a null returned, I believe at least a empty message would be published to message box.
Without orchestration, in message-only scenario one option you can consider is using a custom adapter where you can have your logic whether to send a stream/message out or not. Something like:
public bool TransmitMessage(IBaseMessage msg)
_terminate.Enter();
try
bool logMessages = Convert.ToBoolean(
GetAdapterConfigValue(msg.Context, "logMessages")
if ( logMessages ) {
SystemMessageContext ctxt = new SystemMessageContext(msg.Context);
//Add your logic using XPathReader - stream based XPath
//and check whether the message has the value your're looking for
bool isFound = false;
if (!isFound)
string msgData = "";
StreamReader reader = new StreamReader(msg.BodyPart.Data);
using (reader)
msgData = reader.ReadToEnd();
// discard the message
return true;
} finally {
_terminate.Leave();
Above is part of the send adapter code where you add your logic using XPathReader - stream based XPath and check whether the message has the value your're looking for. You can use
null send adapter as refernce and build your logic where it would check for the required value in your custom adapter.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to handle more than one message coming from an async BPEL in a sync BPEL process?

Here is the scenario,
Sync process A is calling an Async process B and Async process B is developed in such a way that it is returning more than one message to sync process A, how you will handle those messages in sync process A?

As durga said, its a wrong design, you will have issues in real time. You wont get the response back most of the time. It can be otherway around, async is waiting for sync process.
Change your design or provide what is your use case below, we can think of which design suits you.
Thanks,
Vijay

How to handle rpc/encoded style messages using BizTalk?

Similar Messages

Maybe you are looking for