How to handle the situation to forward work item manually?

Hi All,
In my workflow -
For agent determination I have some custom logic to determine agents. If custom logic donu2019t return any agents then the requirement is work item needs to send back to workflow initiator.
My issue-
When no agent determines
1.Work item needs to send back to workflow initiator - and he should not able to Approve or Reject work item - He Can only forward work item to any other person manually (he determines to whom it should forward).
2. After manually forwarding the work item it is normal process 2 level of approval from that point .
Please let me know for the first item how to handle the situation?
I have developed 2 section - one goes with regular agent determination -
and the other one when no agent determines then I am assigning back to workflow initiator. Now I want to handle that - initiator should not accept or reject and he can only forward to someone. How to develop this?
Please let me know your thoughts.
Thanks in advance.
Rajesh,

Hi All,
Thanks for the answers.. sorry for late replay.. requirement was not confirmed.
1. As I described in my question
After my custom conditions.. I have to send workitem back to initator ( Now initiator forwards the work item to someone else ( need to restrict users based on role - )..
While doing this process initiator should not have access to approve or reject he should only forward the workitem.
After forwarding the work item -this person should have approve or reject options.
My question is not answered..
1. As Vijay told..
Dont give Approve and Reject Options and in Description u specify like
If I dont provide approve/reject when I am sending the work item to initiator - After initiator forwarding this work item - how do we the other approver will get options Approve and Reject?
2. AS -surjith kumar
If your Using the Rule or Expression you have to restrict via coding - This will solve one of my problem -
How I can restict users with role based?
My problem is not solved.. Initiator should not have access to approve but He should only forward the work item...
Please let me know...

Similar Messages

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

How to handle the errors in transformations

Hi
I am using SOA, JDev 10.1.3.3.
How to handle the exceptions in transformations.
If any thing goes wrong in transformation then how to handle that situation.
I am not getting any kind of instances like errored out..
Please help me out
Regards
Pavankumar

I think your issue is that your process is going into manual recovery.
In the console click on the tab BPEL processes. There is a link on the left for manual recovery. Do you see your processes there?
What happens if you put your transformation into a scope. The in that scope you have a catch All. In this catch All routine just do a terminate. This will error your process but you should see it appear in the console.
cheers
James

How to handle the 500 Internal Server Error + ADF

Hi,
How to handle the 500 Internal error ADF application? I tried with giving the error page in web.xml but it does not work
Please advice

i'm not sure if this is related, but we also have the following in the web.xml file
<filter-mapping>
<filter-name>adfFaces</filter-name>
<url-pattern>*.jsp</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfFaces</filter-name>
<url-pattern>*.jspx</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>

How to incorporate the quantity formula in work centre

I have to incorporate the quantity in work center. if i m using a formula of operation quantity but it is giving me the error that u can only use the formula which has been defined as origin 2. can any one guide me how to incorporate the quantity formula in work center,
The situation is this my client asked me to incorporate the GR quantity as activity type, is there any provision in the system to incorporate the activity as standard value of workcentre i hav used the standard parameter provided for GR quantity but it has the dimension of time while every thing produced at my client location is either is KG or in Carton..
kindly guide me to resolve the issue.........

Hi,
Create a Parameter "ZQUN" with Dimesion as "Mass" and standard value init "KG" and assign this parameter to a formula and assign the formula in the work center, define the standard quantity initially, at the time of final confirmation enter the actual GR quanitity.
Pls get back for any clarification

How to handle the failed records from the table when using DB Adapter

Hi,
I am reading some records from table using DB Adapter inside my synchronous BPEL process. Say like reading 100 records from table in between after successful reading of 90 records an error occured in 91st record due some various reasons(like DB down, Connection interrupted etc.). Then how to handle this situation, whether i have to read all the records from the begining and is there any option to continue from where it stopped reading.
Can please anybody help me out in the regard?
Thanks in advance
Regards,
Aejaz

we had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M.

How to make the same code that works only?

how to make the same code that works only?
code:
Form2.Close = Me.Enabled = true
effect such as this code

I have this code:
Public Class Form1
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Form2.Show()
Me.Enabled = False
End Sub
Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click
Form3.Show()
Me.Enabled = False
End Sub
End Class
he wants to after closing Form2 and Form3 unblocked the whole form1
it means that:
when I click the button, displays the himself form2 and blocks himself form1" and after closing Form2 , unlocks himself Form1"
the same with Form3

I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?

I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?

Disable your antivirus and firewall, and try again.

Can I report on the AGE of open Work Items? How? Group into Buckets?

Is there a way to report on the age of open work items?
Perhaps a bar graph that has several buckets.
a.    Over 364
b.    180 to 364
c.    90 to 179
d.    1 to 89
And then a COUNT in each bucket.
For example, if a Work Item is open longer than 364 day, it would appear in bucket "a" as a count of 1. Say there are a total of 45 Work Items that were opened older than 364 days, then "45" would appear in column "a" now say that there are 100 work items open that are 1 to 89 days old, then 100 would appear in the "d" bucket.
Make sense? How can I report like this?

Hi mrpeepers,
You can use following MDX script when you create this report that uses TfsOlapReportDS
with
member [Measures].[Age]
As
IIF([Measures].[Current Work Item Count]>0,DateDiff("d",cdate([System_CreatedDate].[Date].CurrentMember .name),Now()),null)
member [Measures].[AgeRange]
as
case
when [Measures].[Age] >70 then 70
when [Measures].[Age] >60 then 60
when [Measures].[Age] >50 then 50
when [Measures].[Age] >40 then 40
when [Measures].[Age] >30 then 30
when [Measures].[Age] >20 then 20
when [Measures].[Age] >10 then 10
when [Measures].[Age] >0 then 0
when [Measures].[Age] <0 then -1
else null
end
SELECT
non empty
{[Measures].[Current Work Item Count],[Measures].[Age] ,[Measures].[AgeRange]}
ON COLUMNS,
[System_CreatedDate].[Date].[Date].AllMembers on Rows
FROM [Current Work Item]
And then, drop a Chart to report designer, select “Current_Work_Item_Count” as datafield, AgeRange as category field.
Best Regards,
Ruiz
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sincerely,
Ruiz Yi

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to handle the situation to forward work item manually?

Similar Messages

Maybe you are looking for